Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil. DSR-. 2.8.1 (Excluding cost of GST & Labour cess) |
| 2 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete for all lift.As per analysis (Cartage earth) (Excluding cost of GST & Labour cess) |
| 3 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement:2 coarse sand) to match the existing floor.With Chlorpyriphos/ Linadane E.C. 20% with 1% concentration.DSR-2.35.3 (Excluding cost of GST & Labour cess) |
| 4 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete for all lift. DSR-2.25a (Excluding cost of GST & Labour cess) |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.DSR-2.27 (Excluding cost of GST & Labour cess) |
| 6 | Providing & laying of light cinder filling under floor of toilets & other sunken roofs. MR (Excluding cost of GST & Labour cess) |
| 7 | Construction of drain along apron.Size 150 X 150mm. As per analysis (Excluding cost of GST & Labour cess) |
| 8 | Providing and laying in cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR-4.1.8 (Excluding cost of GST & Labour cess) |
| 9 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Concrete of M30 grade with minimum cement content of 350 kg /cum for Coloumn above Plinth DSR-5.3 (Excluding cost of GST & Labour cess) |
| 10 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Concrete of M30 grade with minimum cement content of 350 kg /cum Upto plinth level for Plinth beam DSR-5.1.2 (Excluding cost of GST & Labour cess) |
| 11 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Concrete of M30 grade with minimum cement content of 350 kg /cum for column DSR-5.2.2 (Excluding cost of GST & Labour cess) |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) DSR- 6.1.2 (Excluding cost of GST & Labour cess) |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) DSR-6.4.2 (Excluding cost of GST & Labour cess) |
| 14 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) DSR- 6.13.2 (Excluding cost of GST & Labour cess) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes inCement mortar 1:4 (1 cement : 4 coarse sand) DSR- 6.4.1 (Excluding cost of GST & Labour cess) |
| 16 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) DSR- 4.10 (Excluding cost of GST & Labour cess) |
| 17 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. DSR- 4.13 (Excluding cost of GST & Labour cess) |
| 18 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. DSR-22.5 (Excluding cost of GST & Labour cess) |
| 19 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCCslab including adjoining walls upto 300 mm height including cleaning the surface before treatment (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions ofwalls and slabs. .......................With average thickness of 120 mm and minimumthickness at khurra as 65 mm. DSR-22.7.1 (Excluding cost of GST & Labour cess) |
| 20 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) for both side DSR-9.21.1+9.22.1*2 (Excluding cost of GST & Labour cess) |
| 21 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters(a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (Excluding cost of GST & Labour cess) |
| 22 | Providing & fixing of Aluminium sheet in toilet doors. MR (Excluding cost of GST & Labour cess) |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (a) Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only (Excluding cost of GST & Labour cess) |
| 24 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR 10.25.2 (Excluding cost of GST & Labour cess) |
| 25 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) DSR No. 10.15.1 (Excluding cost of GST & Labour cess) |
| 26 | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws 35 mm thick shutters Second class teak wood. With ISI marked stainless steel butt hinges of required size Second class teak wood DSR 9.134.1.2.1 (Excluding cost of GST & Labour cess) |
| 27 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 2nd class teak wood beading 62X19 mm. (Excluding cost of GST & Labour cess) |
| 28 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked stainless steel butt hinges of required size Second class teak wood. DSR 9.27.1.2.1 (Excluding cost of GST & Labour cess) |
| 29 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-550D (Jindal Steel, Tata, Sail) or more. DSR 5.22.6 (Excluding cost of GST & Labour cess) |
| 30 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fastsin cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to thedumping ground, all complete as per direction of Engineer-in-Charge. DSR 14.2.1 Door chowkhats (Excluding cost of GST & Labour cess) |
| 31 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) DSR 13.5.1 (Excluding cost of GST & Labour cess) |
| 32 | 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) DSR 13.4.2 (Excluding cost of GST & Labour cess) |
| 33 | 12 mm cement plaster on rough side of single or half brick wall of mix : 1:3 (1 cement: 3 coarse sand) plinth plaster. DSR-13.9.1 (Excluding cost of GST & Labour cess) |
| 34 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) DSR 13.5.2 (Excluding cost of GST & Labour cess) |
| 35 | Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in- Charge. DSR 13.76 (Excluding cost of GST & Labour cess) |
| 36 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. DSR 5.30 (Excluding cost of GST & Labour cess) |
| 37 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the anufacturer) with water absorption less than 0.08% and forming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR 11.41.2 (Excluding cost of GST & Labour cess) |
| 38 | Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarsesand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm DSR 11.46.2 (Excluding cost of GST & Labour cess) |
| 39 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shadecomplete. DSR 11.37 (Excluding cost of GST & Labour cess) |
| 40 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. DSR 11.37A (Excluding cost of GST & Labour cess) |
| 41 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick DSR 11.26.1 (Excluding cost of GST & Labour cess) |
| 42 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado andpillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment tomatch the shade of the slabs, including rubbing and polishing complete. DSR 11.27 (Excluding cost of GST & Labour cess) |
| 43 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble (Area of slab upto 0.50 sqm) (Excluding cost of GST & Labour cess) |
| 44 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate DSR 11.3.1 (Excluding cost of GST & Labour cess) |
| 45 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (wooden painting also) DSR 13.62.1 (Excluding cost of GST & Labour cess) |
| 46 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).DSR 13.47.1 (Excluding cost of GST & Labour cess) |
| 47 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm). DSR 13.46.1 (Excluding cost of GST & Labour cess) |
| 48 | Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. DSR- 13.48.3 (Excluding cost of GST & Labour cess) |
| 49 | Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture DSR-13.48.2 (Excluding cost of GST & Labour cess) |
| 50 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer DSR 13.41.1 (Excluding cost of GST & Labour cess) |
| 51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 (Excluding cost of GST & Labour cess) |
| 52 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes DSR 10.30.2 (Excluding cost of GST & Labour cess) |
| 53 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes DSR 10.30.1 (Excluding cost of GST & Labour cess) |
| 54 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. DSR- 14.34 (Excluding cost of GST & Labour cess) |
| 55 | Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . MR (Excluding cost of GST & Labour cess) |
| 56 | Providing and fixing stainless steel tower bolts (barrel type) with necessary screws etc. complete (a) 200 mm x 10 mm MR (Excluding cost of GST & Labour cess) |
| 57 | Providing and fixing stainless steel tower bolts (barrel type) with necessary screws etc. complete (a) 150 mm x 10 mm MR (Excluding cost of GST & Labour cess) |
| 58 | Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm MR (Excluding cost of GST & Labour cess) |
| 59 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm DSR 9.62.2 (Excluding cost of GST & Labour cess) |
| 60 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :(a) 250 mm x 10mm DSR 9.63.1 (Excluding cost of GST & Labour cess) |
| 61 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :(a) 200 mm x 10mm DSR 9.63.2 (Excluding cost of GST & Labour cess) |
| 62 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm DSR 9.66.1 (Excluding cost of GST & Labour cess) |
| 63 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : (a) 25 mm dia. DSR 9.46.3 (Excluding cost of GST & Labour cess) |
| 64 | Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. With decorative veneering on one side and commercial veneering on other side DSR 9.130.1 (Excluding cost of GST & Labour cess) |
| 65 | Centering and shuttering including strutting, propping etc. and removal of form for(a) Foundations, footings, bases of columns, etc. for mass concrete. DSR 5.9.1 (Excluding cost of GST & Labour cess) |
| 66 | Centering and shuttering including strutting, propping etc. and removal of form for(b) Columns,Pillars, Piers, Abutments, Posts and Struts. DSR 5.9.6 (Excluding cost of GST & Labour cess) |
| 67 | Centering and shuttering including strutting, propping etc. and removal of form for ( C) Lintels, beams, plinth beams, girders, bressumers and cantilevers. DSR 5.9.5 (Excluding cost of GST & Labour cess) |
| 68 | Centering and shuttering including strutting, propping etc. and removal of form for (d) Suspended floors, roofs, landings, balconies and access platform. DSR 5.9.3 (Excluding cost of GST & Labour cess) |
| 69 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick. DSR-5.9.20 (Excluding cost of GST & Labour cess) |
| 70 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick DSR-5.9.21 (Excluding cost of GST & Labour cess) |
| 71 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restsDSR 17.1.1 (Excluding cost of GST & Labour cess) |
| 72 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap DSR 17.7.4 (Excluding cost of GST & Labour cess) |
| 73 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.a) 32mm dia DSR 17.28.2.1 (Excluding cost of GST & Labour cess) |
| 74 | Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR 17.31 (Excluding cost of GST & Labour cess) |
| 75 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mmDSR 17.10.2.1 (Excluding cost of GST & Labour cess) |
| 76 | Providing & fixing soil, waste and vent pipes.a) 100mm dia centrifugally cast iron S & S pipeDSR 17.35.1.2 (Excluding cost of GST & Labour cess) |
| 77 | Providing & fixing soil, waste and vent pipes.b) 75 mm dia centrifugally cast iron S & S pipe. DSR 17.35.2.2 (Excluding cost of GST & Labour cess) |
| 78 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.a) 100mm DSR 17.58.1 (Excluding cost of GST & Labour cess) |
| 79 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.b) 75mm DSR 17.58.2 (Excluding cost of GST & Labour cess) |
| 80 | Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.a) for 100mm dia pipe. DSR 17.37.1 (Excluding cost of GST & Labour cess) |
| 81 | Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.b) for 75 mm dia pipe. DSR 17.37.2 (Excluding cost of GST & Labour cess) |
| 82 | Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.a) 100mm inlet & 75mm outlet. DSR 17.60.2.1 (Excluding cost of GST & Labour cess) |
| 83 | Providing & fixing cast iron coller.a) 100mm dia.DSR 17.57.1.2 (Excluding cost of GST & Labour cess) |
| 84 | Providing & fixing cast iron coller.b)75 mm dia.DSR 17.57.2.2 (Excluding cost of GST & Labour cess) |
| 85 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. 110mm diameter DSR 12.41.2 (Excluding cost of GST & Labour cess) |
| 86 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.a) 110mm DSR 12.43.2 (Excluding cost of GST & Labour cess) |
| 87 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. (internal work) Exposed on wall. a) 25mm dia nominal bore (medium duty)DSR 18.10.3 (Excluding cost of GST & Labour cess) |
| 88 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. (internal work) Exposed on wallb) 32mm dia nominal bore (medium duty)DSR 18.10.4 (Excluding cost of GST & Labour cess) |
| 89 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.a) 15 mm nominal outer dia Pipes DSR 18.8.1 (Excluding cost of GST & Labour cess) |
| 90 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. a) 20 mm nominal outer dia Pipes DSR 18.8.2 (Excluding cost of GST & Labour cess) |
| 91 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.a) 15mm nominal bore DSR 18.21.2.1 (Excluding cost of GST & Labour cess) |
| 92 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 a) 15mm nominal bore DSR 18.49.1 (Excluding cost of GST & Labour cess) |
| 93 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 a) 15mm nominal bore DSR 18.53.1 (Excluding cost of GST & Labour cess) |
| 94 | Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).a) 25mm nominal bore DSR 18.18.3 (Excluding cost of GST & Labour cess) |
| 95 | Providing and fixing gun metal gate valve with wheel of approved quality.a) 25mm dia nominal bore DSR 18.17.1 (Excluding cost of GST & Labour cess) |
| 96 | Providing and fixing gun metal gate valve with wheel of approved quality.a) 32mm dia nominal bore DSR 18.17.2 (Excluding cost of GST & Labour cess) |
| 97 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 (Excluding cost of GST & Labour cess) |
| 98 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.a) Pipes 80mm to 300mm diameter. DSR 2.10.1.2 (Excluding cost of GST & Labour cess) |
| 99 | Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.b) 150mm diameter DSR 19.1.2 (Excluding cost of GST & Labour cess) |
| 100 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.b) 150mm diameter S.W. Pipe DSR 19.2.2 (Excluding cost of GST & Labour cess) |
| 101 | Providing and fixing square mouth S.W. Gully trap grade 'A' complete with C.I. grating brick masonry chamber with bricks of class M-150 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design.a) 150 x 100 mm. size P type DSR 19.4.2.2 (Excluding cost of GST & Labour cess) |
| 102 | Constructing brick masonry manhole with class bricks M-150 in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.a) Inside size 90x80 cm & 45 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.With M-150 Bricks DSR 19.7.1.1 (Excluding cost of GST & Labour cess) |
| 103 | Providing and Fixing C.P. brass Ablution health faucet assembly with 1.2 m long braided PVC hose with mounting bracket fixed on wall complete.[FOR EWC] MR (Excluding cost of GST & Labour cess) |
| 104 | Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to IS:8931. 15 mm nominal bore MR (Excluding cost of GST & Labour cess) |
| 105 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid DSR 17.2.1 (Excluding cost of GST & Labour cess) |
| 106 | Providing and fixing wash basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls where required : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 (Excluding cost of GST & Labour cess) |
| 107 | Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. 510x1040 mm bowl depth 200 mm DSR 17.10.1.3 (Excluding cost of GST & Labour cess) |
| 108 | Providing & fixing PVC waste pipe for sink oncluding PVC waste fitting Complete 40mm Dia DSR 17.28.2.2 (Excluding cost of GST & Labour cess) |
| 109 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia DSR 17.32.1 (Excluding cost of GST & Labour cess) |
| 110 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. DSR 17.33 (Excluding cost of GST & Labour cess) |
| 111 | Providing and fixing toilet paper holder : CP brass DSR 17.34.1 (Excluding cost of GST & Labour cess) |
| 112 | Providing and fixing heel rest sanitary bend, in Centrifugally cast (spun) iron pipe S&S 100mm DSR 17.40.1.2 (Excluding cost of GST & Labour cess) |
| 113 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 100X100X100mm Sand cast iron S&S as per IS : 3989 DSR 17.43.1.2 (Excluding cost of GST & Labour cess) |
| 114 | Providing and fixing plain juction of required degree 100X100X100mm Sand cast iron S&S as per IS : 3989 DSR 17.44.1.2 (Excluding cost of GST & Labour cess) |
| 115 | Providing and fixing terminal guard: 100mm Sand cast iron S&S as per IS - 3989 DSR 17.56.1.2 (Excluding cost of GST & Labour cess) |
| 116 | Providing and fixing cast iron trap of self cleansing design with cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 100 mm inlet and 100 mm outlet,Sand cast iron S&S as per IS: 3989 DSR 17.60.1.1 (Excluding cost of GST & Labour cess) |
| 117 | Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer (of approval quality) for new work 100mm dia DSR 17.65.1 (Excluding cost of GST & Labour cess) |
| 118 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. DSR 17.71 (Excluding cost of GST & Labour cess) |
| 119 | Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms DSR 17.72 (Excluding cost of GST & Labour cess) |
| 120 | Providing and fixing PTMT towel rail complete with brackets fixed wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms DSR 17.73.2 (Excluding cost of GST & Labour cess) |
| 121 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..Internal work - Exposed on wall 15 mm dia nominal bore DSR 18.7.1 (Excluding cost of GST & Labour cess) |
| 122 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..Internal work - Exposed on wall 20 mm dia nominal bore DSR 18.7.2 (Excluding cost of GST & Labour cess) |
| 123 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..Internal work - Exposed on wall 25 mm dia nominal bore DSR 18.7.3 (Excluding cost of GST & Labour cess) |
| 124 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..Internal work - Exposed on wall 32 mm dia nominal bore DSR 18.7.4 (Excluding cost of GST & Labour cess) |
| 125 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..Internal work - Exposed on wall 40 mm dia nominal bore DSR 18.7.5 (Excluding cost of GST & Labour cess) |
| 126 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia pipes DSR 18.8.1 (Excluding cost of GST & Labour cess) |
| 127 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia pipes DSR 18.8.2 (Excluding cost of GST & Labour cess) |
| 128 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia, nominal bore DSR 18.9.6 (Excluding cost of GST & Labour cess) |
| 129 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 65 mm dia, nominal bore DSR 18.9.7 (Excluding cost of GST & Labour cess) |
| 130 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 40 mm dia, nominal bore DSR 18.17.3 (Excluding cost of GST & Labour cess) |
| 131 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 50 mm dia, nominal bore DSR 18.17.4 (Excluding cost of GST & Labour cess) |
| 132 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 65 mm dia, nominal bore DSR 18.17.5 (Excluding cost of GST & Labour cess) |
| 133 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter DSR 18.22.1 (Excluding cost of GST & Labour cess) |
| 134 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore DSR 18.51.1 (Excluding cost of GST & Labour cess) |
| 135 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia DSR 18.58.1.1 (Excluding cost of GST & Labour cess) |
| 136 | Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. DSR 2.10.1.2 (Excluding cost of GST & Labour cess) |
| 137 | Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 100x100 mm size P type With F.P.S. Bricks class designation 75 DSR 19.4.1.1 (Excluding cost of GST & Labour cess) |
| 138 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm dia rcc pipe DSR 19.6.3 (Excluding cost of GST & Labour cess) |
| 139 | Construction of Sepetic Tank and Soakpit as per analysis. (Excluding cost of GST & Labour cess) |
| 140 | Construction of Boring as per analysis. (Excluding cost of GST & Labour cess) |
| 141 | Construction of 3.6m wide MS Gate as per analysis. (Excluding cost of GST & Labour cess) |
| 142 | Construction of CC Interlocking as per analysis. (Excluding cost of GST & Labour cess) |
| 143 | Construction of drain (300x450mm) as per analysis. (Excluding cost of GST & Labour cess) |
| 144 | Construction of rain water harvesting as per analysis. (Excluding cost of GST & Labour cess) |
| 145 | Earth work filling in campus. (Excluding cost of GST & Labour cess) |
| 146 | Construction of Boundary wall as per analysis. (Excluding cost of GST & Labour cess) |
| 147 | Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modulor switch, with modulor plate, suitable G.I. box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (Excluding GST & Labour cess) |
| 148 | Wiring for fan point / exhaust point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modulor switch, with modulor plate, suitable G.I. box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (Excluding GST & Labour cess) |
| 149 | Wiring for call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modulor switch, with modulor plate, suitable G.I. box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (Excluding GST & Labour cess) |
| 150 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modulor switch, with modulor plate, suitable G.I. box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (Excluding GST & Labour cess) |
| 151 | Supplying and fixing suitable size G.I. Box modulor plate and cover in front on surface or in recees, including providing and fixing 3 pin 5/6 A modulor socket outlet and 5/6 A modulor switch connections etc. as required (Excluding GST & Labour cess) |
| 152 | Supplying and fixing suitable size G.I. Box modulor plate and cover in front on surface or in recees, including providing and fixing 6 pin 5/6 A & 15/16 A modulor socket outlet and 15/16 A modulor switch connections etc. as required (Excluding GST & Labour cess) |
| 153 | Supplying and fixing suitable size G.I. Box modulor plate and cover in front on surface or in recees, including providing and fixing 25 A modulor socket outlet and 25 A modulor SPMCB, \\"C\\" curve including connections painting etc. as required (Excluding GST & Labour cess) |
| 154 | Supplying and fixing call bell / buzzer suitable for single phase ,230 V complete as required (Excluding GST & Labour cess) |
| 155 | Supplying and Fixing of 18 to 22 W LED Tube Light heavy duty Metal Box battern fitting suitable for 1980-2420 system lumens >110 Lm /W, PF>0.95 THD<10%CRI>80, with 3 years warrantee CAT AA (Excluding GST & Labour cess) |
| 156 | S/F of LED street light fitting having dia cast aluminium and diffuser with driver set suitaible for 90 Watt confirming to IP 65 and above protection complete in all respect. Make Havells/crompton CAT-AAA -8250-9900 system lumens High Power LED with lenses>110lm/W, PF>0.95. THD<10% at full load,CRI>70, driver set (Not Circuitory) Phase Protection at 440V &>300V auto cut and re-start feture, with 5 years warrantee. (Excluding GST & Labour cess) |
| 157 | Supplying and fixing of LED Bulb 9 W lumens 630 to 735 complete in all respect (Excluding GST & Labour cess) |
| 158 | Supplying and fixing of 11 Watt Miror Light (Excluding GST & Labour cess) |
| 159 | Supplying installation Testing & Commissioning of LED Recessed/Surface Down Lighter (Round/square) SMD type (Excluding GST & Labour cess) |
| 160 | Supplying and fixing two module stepped type electronic fan regulator on the existing modulor plate switch box including connections but excluding modulor plate (Excluding GST & Labour cess) |
| 161 | Supplying and fixing 5A to 32A rating 240/415 V , 10 KA , \\"C \\" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections , testing and commissioning etc. as required single pole (Excluding GST & Labour cess) |
| 162 | Supplying and fixing of following ways horizental type three pole and neutral sheet steel MCB distribution board 415 V on surfece/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconnection power painted including earthing etc, as required (But without MCB/RCB/Isolator) a 4 Way (4+12) Double Door (Excluding GST & Labour cess) |
| 163 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. a 100 A, 30 kA, FP MCCB (Excluding GST & Labour cess) |
| 164 | S/F of 63 A DP MCB (Excluding GST & Labour cess) |
| 165 | S/F of 63 A Four pole MCB (Excluding GST & Labour cess) |
| 166 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, VTPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 Way (4+24) Double Door (Excluding GST & Labour cess) |
| 167 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 200 A, 36 kA, FP MCCB (Excluding GST & Labour cess) |
| 168 | Supplying and fixing following way single pole and neutral sheet steel MCB distribution board 240 V on surface/recess complete with tinned copper bus bar neutral bus bar earth bar din bar interconnections powder painted including earthing etc as required 16 way, Double door (Excluding GST & Labour cess) |
| 169 | SITC of LT Panel vermin proof, floor mounting, MS Channel base with bottom and fabricated out of 2.0/1.6mm thick CRCA sheet steel, painted with Powder Coated paint of shade as per direction of Engineer-In-Charge after proper sheet teatment process of sheet steel. The bus bar of panel shall be of Electrical grade high conductive Aluminium alloy of appropriate cross section as per rating. The main bus bar shall run throughout the panel of rating as main incomer rating. The bus bar shall be supported by non hygroscopic SMC/DMC bus bar aupports which shall be mounted on proper interval to ensure the bear the jerks of short circuit of 50kA for panels having ACB as incomer & 36 kA for panels having MCCB incomers. Panels shall be constructed in fullly segregated compartment design for each feeder aas per 3b construction format. The panel shall be completed in all respect as per IS:8623 Part 2&3. There shall be seperate metering compartment for incomer metering and outgoing metering. All Incomer feeders shall be provided with multi function metering along with phase indicating lights and other associated components such as CT, Control MCB, Terminal block etc. amd all Outgoing Feeders 100A & above shall be provided with 3 phase Ammeter along with phase indicating lights and other associated components such as CT, Control MCB, Terminal Block etc. The Feeders above shall be provided as accomodated all measuring instruments shall be digital type & all indicating lights shall be LED type. Wiring shall be done from 1100V grade PVC insulated copper flexible wire. All ACB shall be electrically operated draw out type with Micro Processor based O/L, S/C & E/F Release of breaking/ Withstand capacity (ICU/ICs/Icw) 50kA or more. All MCCB shall be thermal magnetic/ Microprocessor with O/L & S/C protection along with required spreaders and extended rotary handle with pad locking facility of Breaking Capacity (ICU/ICS) 36kA or more. All MCB shall be Therrmal 10kA 'C' Curve. Cubical type Swith Board Panel Cat B. Incoming - 400 Amp/ 415 Volt., Outgoing - 200 A 4 Pole MCCB - 2 Nos., 100 A 4P MCCB - 1 No. 63 A MCCB 1 Nos (Excluding GST & Labour cess) |
| 170 | Supply and Laying of Aluminium Conductor PVC insulated armoured served sheathed cables 11OOV grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc of suitable 20.1 size or as directed by Engineer in Charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. -400 Sq mm X 3-1/2 Core (Excluding GST & Labour cess) |
| 171 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. A 3-1/2 x 400 Sq mm (Excluding GST & Labour cess) |
| 172 | 3-1/2 x 150 Sq mm (Excluding GST & Labour cess) |
| 173 | 3-1/2 x 95 Sq mm (Excluding GST & Labour cess) |
| 174 | 3-1/2 x 70 Sq mm (Excluding GST & Labour cess) |
| 175 | 3-1/2 x 25 Sq mm (Excluding GST & Labour cess) |
| 176 | 2 x 10 Sq mm 2 core (Excluding GST & Labour cess) |
| 177 | Suppling & Laying and fixing of one number PVC insulated and PVC sheathed power cable of 1.1 KV grade of following size on wall surface as required - 150 Sq mm 3-1/2 Core (Excluding GST & Labour cess) |
| 178 | Suppling & Laying and fixing of one number PVC insulated and PVC sheathed power cable of 1.1 KV grade of following size on wall surface as required - 95 Sq mm 3-1/2 Core (Excluding GST & Labour cess) |
| 179 | Suppling & Laying and fixing of one number PVC insulated and PVC sheathed power cable of 1.1 KV grade of following size on wall surface as required - 70 Sq mm 3-1/2 Core (Excluding GST & Labour cess) |
| 180 | Suppling & Laying and fixing of one number PVC insulated and PVC sheathed power cable of 1.1 KV grade of following size on wall surface as required -25 Sq mm 3.5 Core (Excluding GST & Labour cess) |
| 181 | Supplying and drawing 1 X 1.5 sqmm of FRLS PVC insulated copper conductor single core cable in the existing surface PVC conduit as required (Excluding GST & Labour cess) |
| 182 | Wiring for circuit /submain wiring alongwith earth wire with the 2 X 1.5 sqmm +1 X 1.5 sqmm earth wire of FRLS PVC insulated copper conductor , single core cable in surface /reccessed medium class PVC conduit sa required (Excluding GST & Labour cess) |
| 183 | Wiring for circuit /submain wiring alongwith earth wire with the 2 X 2.5 sqmm +1 X 2.5 sqmm earth wire of FRLS PVC insulated copper conductor , single core cable in surface /reccessed medium class PVC conduit sa required (Excluding GST & Labour cess) |
| 184 | Wiring for circuit /submain wiring alongwith earth wire with the 2 X 4 sqmm +1 X 4 sqmm earth wire of FRLS PVC insulated copper conductor , single core cable in surface /reccessed medium class PVC conduit sa required (Excluding GST & Labour cess) |
| 185 | Wiring for circuit /submain wiring alongwith earth wire with the 2 X 6 sqmm +1 X 6 sqmm earth wire of FRLS PVC insulated copper conductor , single core cable in surface /reccessed medium class PVC conduit sa required (Excluding GST & Labour cess) |
| 186 | Wiring for circuit /submain wiring alongwith earth wire with the 2 X 10 sqmm +1 X 6 sqmm earth wire of FRLS PVC insulated copper conductor , single core cable in surface /reccessed medium class PVC conduit sa required (Excluding GST & Labour cess) |
| 187 | Earthing with GI earth plate 600 mm X 600 mm X 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr. Long etc. with charcoal / coke and salt as required (Excluding GST & Labour cess) |
| 188 | Providing and fixing 6 SWG dia GI wire for earthing as required (Excluding GST & Labour cess) |
| 189 | Supplying and laying 25 mm x 5 mm Copper Strip at 0.50 metre below ground as strip earth electrode including connection/terminating with G.I. nut, bolt spring washer etc as required. (jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) (Excluding GST & Labour cess) |
| 190 | Installation of exhaust fan in the existing opening ,including making god the damage connections ,testing ,commissioning etc. as required upto 450 mm sweep (Excluding GST & Labour cess) |
| 191 | SITC of 1200 mm Ceiling fan with Brush Less direct current (BLDC) motor class of insulation B 3Nos metal (Aluminum alloy) blades, 30 CM long down rod, 2 nos canopipes shackle kit safety rope, copper winding. (Excluding GST & Labour cess) |
| 192 | Supply & fixing of Co2 type fire extinguisher, 4.5 kg capacity (ISI Marked IS:2878 & TAC approved) complete with intial charge and wall bracket along with supply of all materials and labour for proper completion of work. (Excluding GST & Labour cess) |
| 193 | S/I of 1800mm x 900mm x 12 mm thick chequered rubber matting of tested quality (Excluding GST & Labour cess) |
| 194 | S/F of single pole blanking plate in the existing MCB DB complete etc. as required (Excluding GST & Labour cess) |
| 195 | S/F of cable End box (Loose wire box) (Excluding GST & Labour cess) |
| 196 | S/F of Hexagonal/Round G.P. fan of approved up 1.0 mm thick ISI Marked (Excluding GST & Labour cess) |
| 197 | Cost of 300 mm Fresh air fan/Exhaust Fan (Excluding GST & Labour cess) |
| 198 | S/F of 100 A 4 Pole changeover (Excluding GST & Labour cess) Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
