|
| 1 | Labouir charge for repairing of leakage in existing UPVC distribution system including required earth cutiing and fitting fixing of necessary coupler etc. complete and refilling the trench with available excavated earth as per direction of the Engineer-in-charge. (Payment of couplers, tees, reducers etc will be made separately)[ WR'2023 Item No.1.13] 1.13.1) 315 mm dia |
| 2 | 1.11.2)250 mm dia to 110 mm dia |
| 3 | 1.11.3)90 mm dia |
| 4 | Providing and fixing C.I sluice valves (with cap ) complete with bolts, nuts, rubber insertions. (the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer-in-charge.[DWS'2023 Item No.2.26] a)150 mm dia PN-1.6 |
| 5 | 125mm dia PN-1.6 |
| 6 | Providing, fixing and laying fabricated UPVC tail pieces conforming to IS : 10124 (PART 6) with G.I flange ( 8mm thick) conforming to IS : 14182 including testing of joints as per CPWD specification and direction of the Engineer-in-charge. a)140mm dia |
| 7 | b)110 mm dia |
| 8 | Providing and fitting fixing of G.I hydrant suitable for PVC pipes as per standard specification complete as per direction of Engineer-in-charge (Rate excluding the cost of NTP control valve). 80x50 mm dia |
| 9 | Dismentaling of sluice valve and refitting fixing the same bt earth cutting and repairing etc complete as per direction of Engineer-in-charge. a)250 mm dia |
| 10 | b)200 mm dia |
| 11 | c)150 mm dia |
| 12 | Supplying & fitting fixing CI spandle with GI Top out and removal wheel dfferent dia sluice valve. A) 250 mm dia |
| 13 | b)200 mm dia |
| 14 | c)150 mm dia |
| 15 | d)125 mm dia |
| 16 | Labour charge for fitting fixing of CI sluice valves class- I with cap complete by providing nuts and bolts, 3mm thick rubber insertion etc. (Tail piece if required will be paid separately) (only C.I sluice valve class-I with will be supplied by deptt. at free of cost) a) 300mm dia |
| 17 | 250mm dia |
| 18 | 200mmc dia |
| 19 | 150mm dia |
| 20 | 125mm dia PN-1.6 |
| 21 | 100mm dia |
| 22 | providing and fixing GI pipres of heavy class as per IS1239 with latest amendment complete with GI fittingin/c trenching ,refilling cutting and making good the walls etc.as per direction of the Engineer-in-charge.b) 150 mm dia nominal bore |
| 23 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality. [WR'2023 Item No.3.21] a) 125 mm dia |
| 24 | b) 150 mm dia. |
| 25 | Providing fixing MS bolts in/c nuts and washers complete as per standard design. [SOR'2023 CODE No.9.18] 9.18.1) upto 300 mm length |
| 26 | Providing and fitting fixing of MS shore manifold made with 3mm thick MS sheet of size one way 315 mm dia & 3 way 125 mm dia made with suitable flenge in/c coating with sheet primer in/c proper alignment with pipe line & earth cutting ,backfilling complete as per direction of Engineer-in-charge. |
| 27 | Complete re-winding of 400/440 volt AC 3 phase horizontal motor of different make after taking out of entire burnt copper wire and rewinding the motor with proper gauge of supper enamel copper wire of approved quality, tapping, insulating, varnishing with vernish heating polishing and re-fitting the same as before including carriage of the motor from respective scheme and complete with trail run as per direction of the Engineer-in-charge.a) 20 HP |
| 28 | b) 25 HP |
| 29 | Providing & fitting fixing of Fully Automatic Star Delta type Motor startar (3ph, 50 Hz, 415V 25HP/18.7 kw Relay range within 17-25) in steel sheet enclosure with Conductor, Timer etc. complete suitable for motor pump Havells/L&T/BCH make as per direction of Engineer-in-charge. |
| 30 | Suppying and fitting fixing of PVC insulated Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pnnel board of approved quality |
| 31 | Providing & fitting fixing pvc suction hose pipe overall thickness 5mm of best quality at site of work (Pankaj made) of approved quality.i) 150 mm dia |
| 32 | \\"Providing & fitting fixing C.I foot valve of heavy duty at site of work of approved quality. (i) 150 mm dia. |
| 33 | \\"Providing & fitting fixing MS hose clamp with nuts & bolts etc. complete at site of work of approved quality. (i) 150 mm dia. |
| 34 | Providing & fitting fixing of leather foot valve washer (6mm Thick) for heavy duty at site of work of approved quality as per direction of the Engineer-in-charge. (a) 200 mm dia. |
| 35 | Providing & fitting fixing Steel sheet enclosed switch Fuse unit (Suitable for DIN fuse) triple pole with Neutral Link (TPN)' 415/500 Volt, complete as per direction of Engineer-in-charge. i) Current range 63 Amps |
| 36 | ii) Current range 200 Amps Please Enable Macros to View BoQ information |
