|
| 1 | Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in soft/loose soil as directed |
| 2 | Removing Excavated soils exc 250 mtr not exc 500 mtr and depositing where directed at a level not exc1.5 mtr above the starting point. |
| 3 | M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 4 | M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing all as directed. |
| 5 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed. |
| 6 | M&L PCC type B1 1:2:4 using 20 mm graded aggregate in kerbs |
| 7 | Excavating post holes or similar holes, each not exceeding 0.5 CuM, getting out in Soft/ disintegrated soil and removing surplus soil to a distance n.exc 50m & making good surface all as directed. |
| 8 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and as directed |
| 9 | M & L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation |
| 10 | M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:6 complete all as specified and as directed. |
| 11 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 mixed with WPC as per manufacturer's instruction and finished the surfaces even and smooth without using extra cement complete all as specified and as directed Note:- WPC will be measured and paid for separately. |
| 12 | M& L for Integral waterproofing compound complete as specified and as directed |
| 13 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 14 | S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc all as specified and directed. |
| 15 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified |
| 16 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 17 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of zinc primer all as directed. |
| 18 | M&L for Plain Cement Concrete Type C2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete all as specified and directed. |
| 19 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. |
| 20 | M&L for 75 mm thick PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in plinth protection, laid to slope of 1:30 in alternative bays not exceeding 3 meter in length complete all as specified and directed. |
| 21 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ all as specified and directed. Please Enable Macros to View BoQ information |
