|
| 1 | Surface dressing and site clearance not exceeding 15 cm deep as in soft / loose soil all as directed. |
| 2 | Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil. complete all as specified and directed by Engg-In-charge. |
| 3 | M&L for PCC 1:3:6 type C-2 (40mm grade aggregate) in fdn filling and mass concrete etc complete all as specified and directed by Engg-in-charge . |
| 4 | S & F for mild steel work in tubular truss, post, purlin & rafter etc with sleeve pieces riveted or welded there to and similar roof and ceiling ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed by Engg-in-charge. |
| 5 | S & F for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment.Fe-410-W(Gde-E-250) quality-A Complete all as specified and directed by Engg-in-charge. |
| 6 | S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet \\"colour\\" having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws and bituminous washers as in roof complete all as specified and as directed by Engg-in-charge. |
| 7 | S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet \\"colour\\" having tensile strength of 550Mpa as in roof covering / ridging/ cladding/ valley gutters/eaves gutter to wall, fixed with self tapping screws and bituminous washers as in roof complete all as specified and as directed. |
| 8 | M&L for hardcore of broken stone or boulder of gauge not exceeding 63mm deposited spread and levelled in layers n.exc 15mm thick, watered and rammed to a true surface as in sub base of floor complete all as specified and as directed. |
| 9 | M&L for 100mm thick PCC 1:3:6, Type C-2 using 40 mm graded stone aggregate as in sub base of hardstanding, complete all as specified and directed. |
| 10 | M & L for 75 mm thick PCC 1:2:4 Type B1 using 20 mm graded stone aggregateas in hard standing, finishing surface even and smooth without using extra cement, & making impression of expanded metal whilest the concrete is green,complete all as specified and directed. |
| 11 | M&L of two coats of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified and as directed. |
| 12 | S&F for MS work angle iron as in fencing post,struts incl cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mess) incl all necessary drilling bolting or reveting etc and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed. |
| 13 | Supply only for mild steel TMT bars as in straining bars of size 10mm dia etc complete all as specified and directed. |
| 14 | S&F of MS flat iron, round or square bars conforming to Grade E-165 (Fe- 290) for fixing chain link fencing, all as directed. |
| 15 | S&F for mild steel screw bolts, purpose made with hexagonal or square head at one end and screwed the other end or each screwed end to be fitted with washers and one hexagonal or square nut dia exc 5cm but not exc 10cm long, diameter of the neck is 11to 15mm all as specified and directed. |
| 16 | Supply only chain link MS galvanised fencing of size or type with straining bolts, 10mm dia round bars with 0.9mm dia MS binding wire, flat iron fillets (for securing wire mesh etc), binding and jointing complete, including necessary drilling, bolting or revetting etc as directed by Engineer-in-charge. Note: Flat iron, round bars, nut bolts and washer shall be measured and paid for separately as supply only complete all as specified and as directed by Engineer-in-charge. |
| 17 | Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire compete all as specified and as directed. |
| 18 | M&L for Brick work with sub class 'B' bricks using old size bricks straight or curved on plan on any radious in half brick thick wall built in CM (1:4) etc complete all as specified and directed. |
| 19 | M&L for 15mm thick rendering CM 1:4 on other than fair faces of brick or concrete surfaces of external walls finished even and fair complete all as specified and directed. |
| 20 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in foundation and mass concrete complete all as specified & directed. |
| 21 | M&L for cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate as in copings, kneelers, apex stones, bed plates, window/door cills, lintels, bressumers, steps, boundary pillers and the like including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair,complete, all as specified and directed by Engineer-in-Charge. |
| 22 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 23 | M&L for two coats of cement based paint on plastered surfaces in preparation of surfaces on walls complete all as specified and directed. Please Enable Macros to View BoQ information |
