|
| 1 | Supply and erection of 9 Mtrs. long G. I. Steel Tubular Pole (Pole Specification: Bottom 5.00m. Length x 139.7mm.O.D x 5.40mm. Thickness, Middle : 2.00m. Length x 114.30mm. O.D x 4.50mm. Thickness, Top : 2.00m. Length x 88.90mm. O.D x 3.25mm. Thickness) conforming to 410-SP-42 with base plate 300mmx300mmx3mm and earth work in excavation of foundation of size 3’-0” x 3’-0” x 3’-0” = 0.76 Cum in all type of soil including rough dressing and leveling the bed etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (Make- Bajaj / Crompton / Utkarsh / Vakrangee / RR or equivalent make). (for Nuabazar Chhak to Chauliaganj Durga Mandap) |
| 2 | Supply and erection of 8.0 Mtrs. long G. I. Steel Tubular Pole (Pole Specification: Bottom 5.00m. Length x 114.3mm.O.D x 5.40mm. Thickness, Middle : 1.50m. Length x 88.9mm. O.D x 4.85mm. Thickness, Top : 1.50m. Length x 76.1mm. O.D x 3.25mm. Thickness) conforming to 410-SP-18 with base plate 300mmx300mmx3mm and earth work in excavation of foundation of size 3’-0” x 3’-0” x 3’-0” = 0.76 Cum in all type of soil including rough dressing and leveling the bed etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (Make- Bajaj / Crompton / Utkarsh / Vakrangee / RR or equivalent make) (for Chauliaganj Durga Mandap to Chari Chhak) |
| 3 | Providing and laying un-reinforced plain cement concrete pavement with 43 grade cement with M-20 Grade mix with 20mm and down graded screened washed hard black crusher broken granite chips including hoisting, lowering, laying, watering, curring etc. as required as per the direction of the Engineer-in-Charge. Upto ground level : 1 x 3’-0” x 3’-0” x 3’-0” = 27.00cft.Couping portion : 1 x 1'-6\\" x 1'-6\\" = 03.37 cft. = = 30.37cft. (-) Volume of pole up to top of couping :3.14 x (0'-5½\\")² /4 x 4'-6\\" = (-) 0.71 cft. = 29.66 cft.Or Say 0.83 Cum per each |
| 4 | Supply of all materials, labour, T&P and transportation for centering and shultering of the couping portion etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. 4 x1'-6\\" x 1'6\\" = 9 sq.ft. Or Say 0.83 sqm per each. |
| 5 | Supply, fitting and fixing of Coil Earthing etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. |
| 6 | Supplying, fitting and fixing of size 0'-2' x 5/8\\" M. S. nut and bolt etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. |
| 7 | Supply, fitting and fixing of size 0'-3\\" x 0'-3.1/2 \\" L.T. Shackle Insulator with strap nut and bolt for stringing of XLPE Aerial Bunched cable in the cross arm etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. |
| 8 | Supplying and stringing of 1 x 35sq.mm + 1 x 25sq.mm XLPE Aerial Bunched Cable from pole to pole & Power Supply Pole to Panel at Chauliaganj Durga Mandap to Chari Chhak etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (For pole to pole & Power Supply Pole to Panel) |
| 9 | Supply and laying of 2 core x 10 sq mm PVC insulated PVC sheathed armoured over head aluminum cable for interconnection of power supply for the Street Light poles to Pole at Nuabazar Chhak to Chauliaganj Durga Mandap including cost of materils, labour, T&P and transportation etc. complete as per direction of the Engineerir-in-charge. (Make of wire - Finolex / Polycab / L&T / Anchor / Havels / V Guard) |
| 10 | Supply, fitting and fixing of cable overhead supply arrangements : Supplying and erection of galvanised D' iron clamps complete with CI knob for holding overhead supply cables to hold 2 core x 10 sq mm to provide support to unarmoured aluminium cable for overhead supply for poles arrangements. Galvanised 'D' iron clamps complete with CI Knob etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. |
| 11 | Supply and laying of aluminimum alloy messenger wire of 16 Sq mm to support overhead armoured aluminium 2 core x 10 sq mm cable to be installed at pole to pole etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge.. |
| 12 | Supply and fixing of Single Arm Bracket of Length : 1'-6\\" long G.I pipe suitable for Street Light Fittings with dia 50mm on the top of 8.00 Mtrs. Long G.I Steel Tubular Pole with top designed FRP Dome each. Design is Butterfly Bracket including cost of materials, labour, T&P and transportation etc. complete as per the direction of the Engineer-in-Charge. |
| 13 | Supply & Installation of 120W (±5%) LED Street light with batwing spread in grey corrosion free powder coated aluminium pressure die-cast housing (ADC 12). The IP 66 (ingress protection) and IK07 (impact resistance) heat resistance toughened glass with potted non-dimmable electronic driver should deliver an operating input voltage range of driver (volts) 140-275 VAC , Operating input frequency range of driver ( Hz) 50 Hz-60 Hz, Operating Temperature-10°C to 55°C, Driver Power Factor ≥ 0.90, Driver THD ≤10%, Driver efficiency≥90% and an inbuilt surge protection of 5KV and additional surge protection of 20 KV/10KA with working humidity range should be 0-95%. The street light should come with a LED Chip level efficacy of at least ≥155 lumens per watt and a system efficacy ≥125 lumens per watt with a CRI ≥70(±2) and CCT of 5700K -6500K (IESNA tolerance). The UV resistant polycarbonate 120° lens should provide a focused photometry to provide uniform lighting. The LED life span should be ≥50,000 Hours, Higher voltage Auto Cut- off ≥320 VAC with Phase-to-Phase sustainability of 8 Hours with short Circuit Protection and Reverse Polarity Protection. LED streetlight must have BS Certification etc. complete as per direction of the Engineer-in-Charge. (Make : Bajaj / Crompton / Philips / Havells / Neev or equivalent make with LED fixture that has been approved by ISO & BIS in corporate the LM 79 & LM 80) (for Nuabazar Chhak to Chauliaganj Durga Mandap) |
| 14 | Supply & Installation of 90 W (±5%) LED Street light with batwing spread in grey corrosion free powder coated aluminium pressure die-cast housing (ADC 12). The IP 66 (ingress protection) and IK07 (impact resistance) heat resistance toughened glass with potted non-dimmable electronic driver should deliver an operating input voltage range of driver (volts) 140-275 VAC , Operating input frequency range of driver ( Hz) 50 Hz-60 Hz, Operating Temperature-10°C to 55°C, Driver Power Factor ≥ 0.90, Driver THD ≤10%, Driver efficiency≥90% and an inbuilt surge protection of 5KV and additional surge protection of 20 KV/10KA with working humidity range should be 0-95%. The street light should come with a LED Chip level efficacy of at least ≥155 lumens per watt and a system efficacy ≥125 lumens per watt with a CRI ≥70(±2) and CCT of 5700K -6500K (IESNA tolerance). The UV resistant polycarbonate 120° lens should provide a focused photometry to provide uniform lighting. The LED life span should be ≥50,000 Hours, Higher voltage Auto Cut- off ≥320 VAC with Phase-to-Phase sustainability of 8 Hours with short Circuit Protection and Reverse Polarity Protection. LED streetlight must have BS Certification etc. complete as per direction of the Engineer-in-Charge. (Make : Bajaj / Crompton / Philips / Havells / Neev or equivalent make with LED fixture that has been approved by ISO & BIS in corporate the LM 79 & LM 80) (for Chauliaganj Durga Mandap to Chari Chhak) |
| 15 | Supply and laying of 2.5 Sq.mm PVC insulated sheathed twin core flat aluminum wire for power supply to street light Fitting as per the direction of the Engineer-in-Charge. |
| 16 | Supply and fixing of in built junction box with connector, 16Amp. MCB in each pole as per the direction of the Engineer-in-Charge. |
| 17 | Supply and fixing of Single Phase outdoor type Panel Board with double door locking arrangement made of 16 SWG C.R sheet of size 2'-0\\" x 1'-6\\" x 1'-0\\" and painting with 2 coats of approved paints i. e. D.A.grey with foundation of size 3'-0\\" x 1'-6\\" x 1'-0\\" . The Panel Board consisting of the following accessories.(i) 100 Amp. Kit Kat - 2 nos. (Make-Anchor/HPL/Havelle/L&T),(ii) 63 Amp. 2 pole \\"C\\" series MCB - 1 no,(iii) 40 Amp. 2 pole NHD Series Contactor – 1 no.(iv) Timer - 1 no(iii) Indicator Lamp - 1 no.,(iv) Danger Board - 1 no., with complete wiring with 10sq.mm / 4sq.mm / 2.5sq.mm copper wire as per direction of the Engineer- in- charge. |
| 18 | Supply, fitting and fixing of Chemical Earthing etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (For Panel Earthing) |
| 19 | Supply and fixing of 18 mtrs. long LED Strip Tri Colour Light including Driver with Ingress protection : IP65 in the existing Tubular Pole etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (MAKE: BAJAJ / HAVELLS / CROMPTON / PHILLIPS) |
| 20 | S/F \\"B\\" SERIES, SP MCB : Supply and fixing of 6 Amp to 32 Amp rating 240 Volts \\"B\\" searies Miniature Circuit Braacker (MCB) for lighting and otherr loads of the following poles in the existing MCB DB ISI marked comple with connections, testing and commissioning etc. as required for power supply to above LED Strip Light as per the direction of the Engineer-in-Charge. (SR Sl. No.2.6). (A) Single Pole (SP) (SR Sl. No.2.6.1) |
| 21 | Supply and fixing of 2 core x 1.5 Sq.mm. PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming for power supply to above LED Strip Light as per direction of the Engineer- in- charge. (Make of wire - Finolex / Polycab / L&T / Anchor / Havels / V Guard) Please Enable Macros to View BoQ information |
