|
| 1 | Appendix-1 Reconstruction of Drain |
| 2 | 2.4.2.A:Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres Cement Concrete Grade M-15 & M-20 - By Mechanical Means |
| 3 | 2.4.3.B:Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres Dismantling Brick / Tile work - In cement mortar |
| 4 | 3.13.5.B:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. Marshy soil - Mechanical Means |
| 5 | 12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. |
| 6 | 15.9:Construction of dry rubble flooring at cross drainage works for relatively less important works. |
| 7 | 12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer - (Without formwork) |
| 8 | 12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer |
| 9 | 12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications |
| 10 | OD317009/2025-2026:Laying at or near ground level factory made kerbstone of M25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-incharge. (Length of finished kerb edging shall be measured for payment). (Precast CC kerb stone shall be approved by Engineer in Charge) |
| 11 | OD361711/2025-2026:Granular sub base/base/surface course with local materials (table 400.13) by mix in place method normal. Construction of granular sub base by providing local materials spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with iron rammer to achieve the desired density complete as per clause 401.4 as per Technical specification clause 408. |
| 12 | OD317005/2025-2026:Providing and fixing in position pre cast F.R.P Manhole Cover and frame of required shape and approved quality. 600mm x 600 mm size Light duty (5 ton) |
| 13 | OD317013/2025-2026:Supplying and laying interlocking tile 60mm or nearest size thickness, minimum strength M30 including providing a layer of 6mm aggregate for 5cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & amp; conveyance charges etc. complete. |
| 14 | OD317006/2025-2026:Providing and laying tactile tile (For vision impaired persons as per standards) of size 300 x 300x 60mm having with water absorption less than 0.5 % and conforming to IS :15622; of approved make in all colours and shades in for out door floor such as footpath, courtyard, multi model locations etc. laid on 6mm metal having thickness of 5mm IN ALL SHAPES AND PATTERNS INCLUDING GROUTING THE JOINTS WITH WHITE CEMENT MIXED WITH MATCHING PIGMENTS ETC. Complete as per direction of Engineer in Charge |
| 15 | 55.25:Lifting, conveying and fixing the newly casted RCC covering slabs of any thickness on top of drain in position including all labour charges and miscellaneous expenses etc complete |
| 16 | OD317004/2025-2026:Constructing, placing and jointing precast M25 drain/Utility Trench of size as per drawing over a bed of 100 mm thick stone chippings (4.75 mm nominal size) including conveying erecting etc. complete. |
| 17 | OD317007/2025-2026:Providing Weep holes using 110mm dia PVC pipes working pressure 4 kg/sq.cm including cost of materials ,conveyance, labour charge etc. complete |
| 18 | OD317024/2025-2026:Bailing out water using 5 H P Motor and pump set conveyance to site and erection charges ,cost of fuel, lubricating oil and other stores, pay of staff etc.. complete |
| 19 | OD363787/2025-2026:Applying primmer coat for newly plastered surface after cleaning the surface including all cost and conveyance of all materials, labour charges etc complete. |
| 20 | 8.8:Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces |
| 21 | OD317011/2025-2026:Engaging tipper for removing trees branches , trees debris etc complete |
| 22 | OD317012/2025-2026:Engaging JCB for clearing removing trees branches etc complete |
| 23 | OD317010/2025-2026:Engaging Scavenger for clearing accumulated silt, shoulder clearing, etc. Please Enable Macros to View BoQ information |
