|
| 1 | Desk with seat for student (Small) (Age 11 to 14 Year) Model-II FD/CWE/01/08 |
| 2 | M & L for Replacement of unserviceable top of desk with new top of size 950mm x 400mm x 18mm thick Pre-laminated Particle board exterior grade ISI marked with suitable nut and bolts including half cut half round teak wood beading allround to be fixed with fevicol as per standard workmanship and as directed. |
| 3 | M & L for Replacement of unserviceable Box of desk with new Box of size (01 Nos bottom size 750mmx300mmx18mm thick including 02 Nos Side wall of size 300mmx165mmx18mm and 01 Nos back wall of size 750mmx200mmx18mm) thick Prelaminated Particle board exterior grade ISI marked with suitabloe nut and bolts including half cut half round teak wood beading allround to be fixed with fevicol as per standard workmanship and as directed. |
| 4 | M & L for Replacement of unserviceable seat top of desk with new seat top of size 950mmx300mmx18mm thick Pre-laminated Particle board exterior grade ISI marked with suitable nut and bolts including half cut half round teak wood beading allround to be fixed with fevicol as per standard workmanship and as directed. |
| 5 | M & L for Replacement of unserviceable back rest of seat of desk with new back rest of seat of size 950mm x 160mm x 18mm thick Pre-laminated Particle board exterior grade ISI marked with suitabloe nut and bolts including half cut half round teak wood beading allround to be fixed with fevicol as per standard workmanship and as directed. |
| 6 | M & L for Replacement of unserviceable borken MS square pipe member like leg, stiffner, side rails, top rails, bottom rails etc from Desk with seat (Small) with new MS square pipe 25mm x 1.6mm thick member of where ever required with required size of member in the desk as above including required continious welding to allround to the square pipe for fixing as per standard workmanship and as directed. |
| 7 | Welding the loose point of welded portion of steel frame of Desk with seat (Small) where the continuous welding required or welding left from the joints The one continuous runing welding shall be measured as one welding point. welding to be done as per standard workmanship and as directed. |
| 8 | Removing paint by scrapping down old painted surface carrying out repairs such as removing the dents and minor welding wherever required and applying one coat of synthetic enamel paint of required shade over a coat of red oxide primer on the desk with seat for student (Small), complete all as specified in drawing and as directed. |
| 9 | Desk with seat for student (large) (Age 15 Year and above) Model-II FD/CWE/01/08 |
| 10 | M & L for Replacement of unserviceable top of desk with new top of size 1050mm x 460mm x 18mm thick Pre-laminated Particle board exterior grade ISI marked with suitabloe nut and bolts including half cut half round teak wood beading allround to be fixed with fevicol. |
| 11 | M & L for Replacement of unserviceable Box of desk with new Box of size (01 Nos bottom size 845mm x 325mm x 18mm thick including 02 Nos Side wall of size 325mm x 170mm x 18mm and 01 Nos back wall of size 850mm x 190mm x 18mm) thick Pre-laminated Particle board exterior grade ISI marked with suitable nut and bolts including half cut half round teak wood beading allround to be fixed with fevicol as per standard workmanship and as directed. |
| 12 | M & L for Replacement of unserviceable seat top of desk with new seat top of size 1050mm x 325mm x 18mm thick Pre-laminated Particle board exterior grade ISI marked with suitabloe nut and bolts including half cut half round teak wood beading allround to be fixed with fevicol as per standard workmanship and as directed. |
| 13 | M & L for Replacement of unserviceable back rest of seat of desk with new back rest of seat of size 1050mm x 180mm x 18mm thick Pre-laminated Particle board exterior grade ISI marked with suitable nut and bolts including half cut half round teak wood beading allround to be fixed with fevicol as per standard workmanship and as directed. |
| 14 | M & L for Replacement of unserviceable broken MS square pipe member like leg, stiffner, side rails, top rails, bottom rails etc from Desk with seat (Large) with new MS square pipe 25mm x 1.6mm thick member of where ever required with required size of member in the desk as above including required continious welding to allround to the square pipe for fixing as per standard workmanship and as directed. |
| 15 | Welding the loose point of welded portion of steel frame of Desk with seat (large) where the continuous welding required or welding left from the joints. The one continuous runing welding shall be measured as one welding point. welding to be done as per standard workmanship and as directed. |
| 16 | Removing paint by scrapping down old painted surface carrying out repairs such as removing the dents and minor welding wherever required and applying one coat of synthetic enamel paint of required shade over a coat of red oxide primer on the desk with seat for student (Small), complete all as specified in drawing and as directed. |
| 17 | M & L for Repairs to the following Tables by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as specified and as shown on drawing. |
| 18 | Legs for Table Dining 8 persons FD-239/273/376 |
| 19 | Long Rail for Table Dining 8 persons FD-239/273/376 |
| 20 | Short Rail for Table Dining 8 persons FD-239/273/376 |
| 21 | Stiffeners for Table Dining 8 persons FD-239/273/376 |
| 22 | Legs for Table Dining 6 persons FD-239/273/376 |
| 23 | Long Rail for Table Dining 6 persons FD-239/273/376 |
| 24 | Short Rail for Table Dining 6 persons FD-239/273/376 |
| 25 | Stiffeners for Table Dining 6 persons FD-239/273/376 |
| 26 | Legs for Table peg |
| 27 | Top Rail (Long) for Table peg |
| 28 | Bottom Rail (Short) for Table peg |
| 29 | Legs for Table centre FD-235/274 |
| 30 | Top Rail (Long) for Table centre FD-235/274 |
| 31 | Bottom Rail (Short) for Table centre FD-235/274 |
| 32 | Legs for Teapoy FD-232/382 |
| 33 | Long Rail for Teapoy FD-232/382 |
| 34 | Bottom Rail (Short) for Teapoy FD-232/382 |
| 35 | Legs for Table 3'x2' with drawer FD-231/283/284 |
| 36 | Long Rail (Top) for Table 3'x2' with drawer FD-231/283/284 |
| 37 | Short Rail (Top) for Table 3'x2' with drawer FD-231/283/284 |
| 38 | Triangular TW Corner Brackets of size 75 x 75 x 25mm for Table 3'x2' with drawer FD-231/283/284 Fixing of bracket should be done with fevicol and suitable steel screws. |
| 39 | M&L for replacement of existing Drawer for Table 3'x2' with drawer FD-231/283/284 with new drawer as existing size and shape and provide fancy Knob as approved to the drawer. |
| 40 | Table bed side Map (FD/E6/MAP/15 R) |
| 41 | Removing the existing unserviceable top from Table Bed side MAP and S & F of new top of 18mm thick prelaminated particle board exterior grade as per existing shape size and colour 4mm thick teakwood beading shall be provided all round the top, complete all as specified in drawing and as directed. |
| 42 | Removing the existing unserviceable back side ply of Table Bed side MAP and supply and fixing of new back side ply of as per existing shape and size, complete all as specified in drawing and as directed. |
| 43 | Removing the existing unserviceable side portion of Table Bed side MAP and supply and fixing of new side of made out of 18mm thick prelaminated particle board exterior grade with 4mm thick teakwood beading as per existing shape and size and colour, complete all as specified in drawing and as directed. |
| 44 | Removing the existing unserviceable small drawers of Table bed side MAP and supply and fixing of new drawers with telescopic channel as per existing shape and size. Front portion of drawer shall be provided 18mm thick prelaminated particle board exterior grade as per existing shade including stainless steel D type handle of approved quality Side portion and inside of the drawer shall be provided with 12mm thick commercial plywood bottom shall be provided with 6mm thick plywood commercial complete all as specified in drawing and as directed. |
| 45 | Removing the existing unserviceable large drawers of Table bed side MAP and supply and fixing of new drawers with telescopic channel as per existing shape and size. Front portion of drawer shall be provided 18mm thick prelaminated particle board exterior grade as per existing shade including stainless steel D type handle of approved quality. Side portion and inside of the drawer shall be provided with 12mm thick commercial plywood bottom shall be provided with 6mm thick plywood commercial. complete all as specified in drawing and as directed. |
| 46 | Repairs to Chair Dining by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as shown on drg No FD-228/279 |
| 47 | Front Leg |
| 48 | Rear Leg |
| 49 | Side Rail of Seat Frame |
| 50 | Rear Rail of Seat Frame |
| 51 | Front Rail of Seat Frame |
| 52 | Back Rest |
| 53 | Stiffener (Side) |
| 54 | Stiffener (Centre) |
| 55 | Supply & fixing of corner bracket made out of 1st class hard (Teak) wood of size 75 x 75 x 20mm thick to chair dining Fixing of bracket should be done with fevicol and suitable steel screws as per standard workmanship. |
| 56 | teaking off existing unserviceable cane from chair dining and cleaning the rebated portions and re caning with new cane plastic 2mm half round not recycled and perimeter with 3.5mm half round cane as per Godrej pattern and all as shown on drawing. |
| 57 | Tightening the wooden members with bamboo pins where ever required in the chair to made to existing shape all as directed and Preparing the surface of old and new members of chair dining by smoothly/ rubbing with 120 Gde or various sizes sand paper/ abrasive cloth or machine and clean off surface and applying sealer wherever required to fill and smoothen the surface and apply two coats of french polish to the entire external and visible surface complete uniformingly upto glossy mirror finish, including providing of 04 Nos hard PVC shoe of heavy duty to the chair with steel screw (04 Nos in each chair) and complete all as specified in drawing and as directed. |
| 58 | Repairs to Chair Writing by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as shown on drg No FD-250/280. |
| 59 | Front Leg |
| 60 | Rear Leg |
| 61 | Side Rail of Seat Frame |
| 62 | Rear Rail of Seat Frame |
| 63 | Front Rail of Seat Frame |
| 64 | Back Rest |
| 65 | Arm Rest |
| 66 | Stiffener (Side) |
| 67 | Stiffener (Centre) |
| 68 | Supply & fixing of corner bracket made out of 1st class hard (Teak) wood of size 75 x 75 x 20mm thick to chair dining Fixing of bracket should be done with fevicol and suitable steel screws as per standard workmanship. |
| 69 | teaking off existing unserviceable cane from chair writing and cleaning the rebated portions and re-caning with new cane plastic 2mm half round not recycled and perimeter with 3.5mm half round cane as per Godrej pattern and all as shown on drawing. |
| 70 | Tightening the wooden members with bamboo pins where ever required in the chair to made to existing shape all as directed and Preparing the surface of old and new members of chair dining by smoothly/ rubbing with 120 Gde or various sizes sand paper/ abrasive cloth or machine and clean off surface and applying sealer wherever required to fill and smoothen the surface and apply two coat of french polish to the entire external and visible surface complete uniformingly upto glossy mirror finish, including providing of 04 Nos hard PVC shoe of heavy duty to the chair with steel screw (04 Nos in each chair) and complete all as specified in drawing and as directed. |
| 71 | Repairs to Chair Easy by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as shown on drawing No FD-229 |
| 72 | Front Leg |
| 73 | Rear Leg |
| 74 | Side Rail of Seat Frame |
| 75 | Rear Rail of Seat Frame |
| 76 | Front Rail of Seat Frame |
| 77 | Arm Rest |
| 78 | Side Rail of Back Rest |
| 79 | Upper/Lower Rail of Back Rest |
| 80 | teaking off existing unserviceable cane from chair easy and cleaning the rebated portions and re caning with new cane plastic 2mm half round not recycled and perimeter with 3.5mm half round cane to seat and back as per Godrej pattern and all as shown on drawing. |
| 81 | Tightening the wooden members with bamboo pins where ever required in the chair to made to existing shape all as directed and Preparing the surface of old and new members of chair dining by smoothly/ rubbing with 120 Gde or various sizes sand paper/ abrasive cloth or machine and clean off surface and applying sealer wherever required to fill and smoothen the surface and apply two coat of french polish to the entire external and visible surface complete uniformingly upto glossy mirror finish, including providing of 04 Nos hard PVC shoe of heavy duty to the chair with steel screw (04 Nos in each chair) and complete all as specified in drawing and as directed. |
| 82 | Repairs to Table dressing Gents by removing the following existing unserviceable, including french polishing all as specified and shown on drawing (Drg No FD FD/E6/MAP/16) |
| 83 | Cabinet shall be made of 18mm thick prelaminated particle board both side, exterior grade (grade-I, type-II) ISI marked with as per standard workmanship. |
| 84 | 5mm thick looking mirror of make:- Modiguard/Swastik/Atul to be provided. |
| 85 | All wood surface shall be finished with melamine polish of (make:- Asian/Berger/Nerolac) of approved colour and shade with spray machine after smoothing and preparation of surface upto glossy finish as per trade practice and standard workmanship and as directed. |
| 86 | Table writing wooden M & L for Repairs to the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as specified and as shown on drawing. |
| 87 | Legs for Table writing FD-249/275 |
| 88 | Top Rail (Long) for Table writing FD-249/275 |
| 89 | Top Rail (Short) for Table writing FD-249/275 |
| 90 | Stiffener (Long) for Table writing FD-249/275 |
| 91 | Stiffener (Side) for Table writing FD-249/275 |
| 92 | Side/Back side ply 6mm thick commercial plywood for Table writing |
| 93 | M & L for replacement of existing unserviceable Door Shutter with piano hinge for Table writing with new door shutter made of 18mm thick prelaminated particle board exterior grade ISI marked as per existing size and shape including fixing of Stainless steel piano hinges ISI Marked and beading as per drg and provide Stainless steel D type handle to the door of approved quality as directed. |
| 94 | M & L for replacement of existing unserviceable Drawer for Table writing with new drawer as existing size and shape and provide Stainless steel D type handle to the drawer of approved quality as directed. |
| 95 | M & L for replacement of existing unserviceable box cabinet of table writing including door, drawer, handle etc and supply and fix New box cabinet, drawer and door made of 18mm thick prelaminated particle board exterior grade ISI marked as per existing size and shape as per drg including fixing of Stainless steel piano hinges for table writing as per drg and as directed including teakwood 4mm thick teak wood beading all-round and 6mm thick BWR Plywood on back side as per drg and provide Stainless steel \\"D\\" type handle to the door and drawer of approved quality as directed. |
| 96 | Table bed side (FD-276) |
| 97 | Removing the existing unserviceable top from Table Bed side MAP and S & F of new top of 18mm thick prelaminated particle board exterior grade as per existing shape size and colour 4mm thick teakwood beading shall be provided all round the top, complete all as specified in drawing and as directed. |
| 98 | Removing the existing unserviceable back side ply of Table Bed side and supply and fixing of new back side ply of as per existing shape and size, complete all as specified in drawing and as directed. |
| 99 | Removing the existing unserviceable side portion of Table Bed side MAP and supply and fixing of new side of made out of 18mm thick prelaminated particle board exterior grade with 4mm thick teakwood beading as per existing shape and size and colour, complete all as specified in drawing and as directed. |
| 100 | Removing the existing unserviceable shelf of Table bed side and supply and fixing of new self as per existing shape and size including teak wood beading complete all as specified in drawing and as directed. |
| 101 | Side Board (FD-26/FD-241) |
| 102 | Removing the existing unserviceable top/bottom of side board and supply & fixing new top/bottom of required size as per drg made out of 18mm thick prelaminated particle/MDF board, exterior grade |
| 103 | Removing the existing unserviceable back of side board and supply & fixing new back of reqd size as per drg made out of 6mm thick plywood 5 ply, BWR grade all as specified and directed. |
| 104 | Removing the existing unserviceable door shutter of side board and S & F new door shutter of size 600 x 375mm made out of 18mm thick particle board exterior grade with suitable piano hinge and provide Stainless steel \\"D\\" type handle to the door all as specified and as directed. |
| 105 | Removing the existing unserviceable side panel of the side board and supply and fixing new side panel of size 625 x 450mm made out of 18mm thick particle/ MDF board exterior grade with teak ply veneered one side and commercial ply veneered to other side all as specified and as directed. |
| 106 | M&L for replacement of existing unserviceable Drawer for Side board with new drawer as existing size and shape and provide Stainless steel D type handle as approved to the drawer. |
| 107 | M&L for replacement of existing unserviceable Leg for Side board with new leg made out of teakwood as existing size and shape and fixed with Stainless steel clamp and as directed. |
| 108 | Bin linen multipurpose MAP |
| 109 | Removing the existing unserviceable top/ bottom of Bin linen and supply & fixing new top of size as per drg made out of 18mm thick prelaminated particle/ MDF board, exterior grade |
| 110 | Removing the existing unserviceable back of Bin linen and supply & fixing new back of size as per drg made out of 6mm thick plywood 5 ply, BWR grade all as specified and directed. |
| 111 | Removing the existing unserviceable door shutter of Bin linen and S & F new door shutter of size as per drg made out of 18mm thick particle board exterior grade with suitable piano hinge and provide Stainless steel D type handle to the door all as specified and as directed. |
| 112 | Removing the existing unserviceable side panel of the Bin linen and supply and fixing new side panel of size as per drg made out of 18mm thick particle/MDF board exterior grade with teak ply veneered one side and commercial ply veneered to other side all as specified and as directed. |
| 113 | M&L for replacement of existing unserviceable Drawer for Bin linen with new drawer as existing size and shape and provide Stainless steel D type handle as approved to the drawer. |
| 114 | M&L for replacement of existing unserviceable Leg for Bin linen with new leg made out of teakwood as existing size and shape and fixed with Stainless steel clamp and as directed. |
| 115 | S & F top of various tables. Table top shall be made of 18/19 mm thick prelaminated MDF board both side, exterior grade (grade-I, type-II) ISI marked with approved colour or shade as approved by GE of (make:- Century prowud from Century ply/Green panel max from Green ply/Action Tessa) with 2mm thick PVC edging of matching colour all round on table top etc shall be fixed with strong bonded chemical through hot pressed machine to be provided as per standard workmanship. Note: Hand pressed/manual pressed beading will not be accepted.rest all as specified and shown on drg. |
| 116 | Table Dining 8 Person (1800 x 900mm) |
| 117 | Table Dining 6 Person (1500 x 900mm) |
| 118 | Table Dining 3' x 3' (900 x 900mm) |
| 119 | Table Dining 4' x 3' (1200 x 900mm) |
| 120 | Table Peg (450 x 300mm) |
| 121 | Table Centre (900mm x 450mm) |
| 122 | Teapoy (450mm x 600mm) |
| 123 | Table Writing (1150 x 600mm) |
| 124 | Table 900 x 600mm without Drawer/with drawer |
| 125 | Preparation of existing surfaces of following wooden furniture by smoothing through sand papering and applying two coats of french polish, all as specified and as directed by GE:- |
| 126 | Book Case wooden FD-237,355 |
| 127 | Hat Stand FD-233/361 |
| 128 | Side Board FD-26/FD-241 |
| 129 | Table 900x900x760 |
| 130 | Table Centre FD-235/274 |
| 131 | Table Dining 6 Pers FD-239/273/376 |
| 132 | Table Dining 8 Pers FD-239/273/376 |
| 133 | Table Dressing Gents FD-230 |
| 134 | Table Dressing Ladies FD-251/378 |
| 135 | Table Peg FD-236/277/384 |
| 136 | Table 900x600x760mm with /without drawer FD-231/284/283/224 |
| 137 | Table Writing FD-249/275 |
| 138 | Teapoy FD-232/382 |
| 139 | Teak Wood Long Bench of Size 6' Long with back rest |
| 140 | Teak Wood Railing 900mm high with wooden balusters |
| 141 | Chair Visitor (Teak Wood) with Cushion Seat & Back FD/CWE/15/10 |
| 142 | Magazine Display Rack Steel Godrej |
| 143 | Chair Easy Cushioned |
| 144 | Hat Stand With Mirror Supply & fixing of the following components/parts of Hat stand with mirror, including dismantling of unserviceable components all as specified and shown on drg. |
| 145 | M & L for Replacement of unserviceable back ply wood 6 mm thick as per drg |
| 146 | M & L for Replacement of unserviceable front ply wood 3.5 mm thick teak face all as per drg |
| 147 | M & L for Replacement of unserviceable looking mirror with beading of hat stand as per drg. |
| 148 | M & L for Replacement of unserviceable pegs of hat stand with Brass pegs of size as per drg and as directed |
| 149 | Repairs to Table dressing ladies by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, including french polishing all as specified and shown on drawing (Drg No FD-251 & FD-378, (FD/MAP/07) |
| 150 | M & L for replacement of unserviceable looking Mirror including back ply of size as per drg with new looking mirror 5mm thick electro copper plated with back of 6mm thick ply wood commercial BWR grade as per drg. |
| 151 | M&L for replacement of unserviceable back side of table dressing ladies with new back as per existing size and shape made out of 18 mm thick pre-laminated particle board exterior grade duly beaded with 4 m thick teak wood beading and as specified in drg. |
| 152 | M &L for Replacement of unserviceable box cabinet including drawer, shutter and telescopic channel of table dressing ladies and supply and fix new cabinet box including drawer, shutter and telescopic channel (make:- Link/Godrej/Hettich) as per drg Box cabinet should be made out of 18mm thick pre-laminated particle board exterior grade duly beaded with 4mm thick teak wood beading as per existing size and shape and as per drg including provide D type Stainless steel handle to Table dressing ladies (MAP) as per drawing |
| 153 | M & L for replacement of unserviceable cushion of stool dressing of table dressing ladies (MAP) with new 75mm thick 40 density cushion including upholstry of best quality tapestry cloth of approved colour and texture Cost of tapestry should not be less than 350/- per meter. |
| 154 | M & L for replacement of unserviceable box cabinet of stool of dressing table dressing ladies (MAP) with new box Cabinet stool made of 18mm thick prelaminated particle board exterior grade ISI marked as per existing size and shape including fixing of teakwood beading and Stainless steel handle as per drg and as directed. |
| 155 | M & L replacement of unserviceable caster wheel of stool dressing of table dressing ladies (MAP) with new heavy duty best quality caster wheel of approved quality as per drg and as directed. |
| 156 | Repairs to Table dressing Gents by removing the following existing unserviceable, including french polishing all as specified and shown on drawing (Drg No FD-230) |
| 157 | Looking mirror of size 760 x 380 x 5mm thick electro copper plated mirror with back of 6mm thick ply wood commercial |
| 158 | Mirror frame of size 20 x 25mm all around |
| 159 | Wooden member back of dressing mirror (Gents ) of size 35 x 25 x 750mm |
| 160 | Top of size 300 x 900mm made out of 12mm thick pre-laminated particle board with one side teak finish and other side balancing white duly beaded with 6mm thick teak wood beading |
| 161 | Back made out of 12mm thick plywood commercial, size of 300 x 900mm |
| 162 | M&L for replacement of existing unserviceable Drawer with new drawer as existing size and shape and provide Stainless steel D type handle as approved to the drawer. |
| 163 | Repairs to Chair Easy with cushioned by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as shown on drawing (FD-358) |
| 164 | Front Leg |
| 165 | Rear Leg |
| 166 | Side Rail of Seat Frame |
| 167 | Rear Rail of Seat Frame |
| 168 | Front Rail of Seat Frame |
| 169 | Arm Rest |
| 170 | Side Rail of Back Rest |
| 171 | Upper/Lower Rail of Back Rest |
| 172 | Synthetic foam 75mm thick, 28 density for seat frame |
| 173 | Synthetic foam 50mm thick, 28 density for back frame |
| 174 | Leatherised rexine of approved shade/ texture/Quality for Seat, Back and Arm Rest |
| 175 | Chair Easy Make : Godrej Model PCH-7003 |
| 176 | Removing existing unserviceable tapestry cloth of seat and S & F new tapestry cloth, lining etc. as per existing pattern, complete all as specified in drawing and as directed. |
| 177 | Removing existing unserviceable tapestry cloth of back and S & F new tapestry cloth, lining etc. as per existing pattern, complete all as specified in drawing and as directed. |
| 178 | Removing existing unserviceable seat and back cushion and S&F new seat cushion as per existing pattern, including tapestry cloth approved quality complete all as specified in drawing and as directed. |
| 179 | Removing and cleaning the old painted surface by scrubbing smoothing the surface by emery cloth and applying two coats of synthetic enamel Black paint or required shade to match with the existing shade, complete all as specified in drawing and as directed. |
| 180 | Chair Verandah FD/MAP-II/15 |
| 181 | Removing of old unserviceable PVC seat and back of chair verandah and S & F New PVC seat and back set 4mm thick with weight not less than 1.8kg all as per drg Make:- AMCO, complete all as specified, shown on drg and as directed |
| 182 | Cleaning the old painted surfaces, applying one coat of synthetic enamel white paint all round including welding of left out welded portion complete all as specified and shown on drawing and as directed. |
| 183 | Removing of unserviceable or torn out shoes and S & F new PVC shoe heavy duty of approved quality as per drg. |
| 184 | Chair writing (Make:- Godrej Model CH-7044T) |
| 185 | Removing existing unserviceable plywood, cushion from seat Assembly and S & F new cushion moulded type 50mm thick, 50-55 density of sizes 460mm x 410mm x 50mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) over a new plywood of 12mm thick duly fixed with suitable Stainless steel nut and bolts as existing complete all as specified in drawing and as directed. |
| 186 | Removing existing unserviceable cushion from back Assembly and S & F new cushion moulded type 50mm thick, 50-55 density of sizes 460mm x 460mm x 50mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) complete all as specified in drawing and as directed. |
| 187 | Removing and cleaning the old painted surface by scrubbing smoothing the surface by emery cloth and applying two coats of synthetic enamel Black paint or required shade to match with the existing shade, complete all as specified in drawing and as directed. |
| 188 | Chair easy (Make:- Godrej Model OXBO) |
| 189 | Removing existing unserviceable plywood, screws, cushion, tapestry from seat Assembly and S & F new plywood 12mm, Stainless steel screws, cushion moulded type 75mm thick, 50-55 density of sizes 470mm x 470mm x 75mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) including zip arrangements to be fixed with new Stainless steel nut and bolts of reqd sizes over a new 12mm thick BWR plywood complete all as specified in drawing and as directed. |
| 190 | Removing existing unserviceable tapestry cloth from seat Assembly and S & F new tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) including zip arrangements to be fixed and new Stainless steel nut and bolts of reqd sizes to be provided to fix seat to the frame rest complete all as specified in drawing and as directed. |
| 191 | Removing existing unserviceable nylon cloth mesh type from back Assembly and S & F new nylon cloth mesh type of approved quality of existing pattern, size and shape (rate of mesh cloth should not be less than Rs 400/- meter) including zip arrangement and Velcro complete all as specified in drawing and as directed. |
| 192 | Removing existing unserviceable hand rest and S & F new hand rest as per existing pattern and size, to be fixed with Stainless steel nut and bolt as existing complete all as specified in drawing and as directed. |
| 193 | Removing and cleaning the old painted surface by scrubbing smoothing the surface by emery cloth and applying two coat of synthetic enamel Black paint or required shade to match with the existing shade, and providing 04 Nos hard PVC shoe to the chair of existing pattern and size complete all as specified in drawing and as directed. |
| 194 | Repairs to Desk 4' x 6\\" long by removing the following existing unserviceable wooden members and S & F new first class hard wood (teak) members, all as shown on drg No TP |
| 195 | Front Leg of size 60x60x730mm |
| 196 | Rear Leg of size 60x60x800mm |
| 197 | Stiffener (long) bottom size 50x30x1300mm |
| 198 | Stiffener (short) bottom size 50x30x450mm |
| 199 | Supply & fixing of corner bracket made out of 1st class hard (Teak) wood of size 80 x 80 x 30mm thick to the desk Fixing of bracket should be done with fevicol and suitable steel screws as per standard workmanship. |
| 200 | Tightening the wooden members with bamboo pins where ever required in the desk to made to existing shape all as directed and Preparing the surface of old and new members by smoothly/ rubbing with 120 Gde or various sizes sand paper/ abrasive cloth or machine and clean off surface and applying sealer wherever required to fill and smoothen the surface and apply two coats of french polish to the entire external and visible surface complete uniformingly upto glossy mirror finish, complete all as specified and as directed. |
| 201 | TV trolley(FD/E6/MAP-04) |
| 202 | M & L Stainless steel \\"D\\" type handle of size 120mm of approved quality including removing the existing unserviceable Handles of drawers of TV trolley and all as specified and directed. |
| 203 | M & L 18mm thick Pre- Laminated particle board exterior grade ISI marked for Top of TV Trolley with 4mm thick teak wood beading duly polished all around as per drawing and as specified and as directed including removing the existing unserviceable Top of TV trolley.Make:- Kit ply/ Green ply/ century/ Archid/ Action Tesa. |
| 204 | M & L 18mm thick Pre- Laminated particle board exterior grade ISI marked for sides of TV Trolley with 4mm thick teak wood beading duly polished all around all as per drawing and all as specified and as directed including removing the existing unserviceable Sides of TV trolley.Make:- Kit ply/ Green ply/ century/ Archid/Action Tesa. |
| 205 | M & L 5mm thick Glass shutter with magnetic catcher with accessories for TV Trolley as per drawing and all as specified and directed including removing the existing unserviceable/ Broken Glass shutter of TV trolley. Make:- Modi Guard/ Saint Gobain |
| 206 | M & L Castors Wheels of best quality as approved all as per drawing and all as specified and directed including removing the existing unserviceable/Broken Castors wheels of TV trolley. Please Enable Macros to View BoQ information |
