|
| 1 | Taking up or down following size of steel tubing and connections:- |
| 2 | 15mm bore of pipe |
| 3 | 20mm bore of pipe |
| 4 | 25mm bore of pipe |
| 5 | S&F CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: (SDR-13.5) |
| 6 | 15mm bore of pipe |
| 7 | 20mm nominal dia of pipes |
| 8 | 25mm nominal dia of pipes |
| 9 | S&F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of following size :- |
| 10 | 15mm bore |
| 11 | 20mm bore |
| 12 | 25mm bore |
| 13 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwedboth ends for iron pipe and fixed of following sizes |
| 14 | 15mm dia bore |
| 15 | 20mm dia bore |
| 16 | 25mm dia bore |
| 17 | S&F in repairs rotational moulded polythene white water storage tank (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 500 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) (Make of tank - Sintex or equivqalent of makes given in Appendix 'B'to PS, Make of ball valve - Prayag Cat No - 153 or equivalent in Polytuff as approved by GE) |
| 18 | All as per item above but capacity 750 ltrs |
| 19 | All as per item above but capacity 1000 ltrs |
| 20 | S&F in repairs 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) |
| 21 | S&F in repairs 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) |
| 22 | S&F in repairs 15mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) |
| 23 | Dismantling of cast iron/PVC /AC or reinforced concrete pipes jointed in cement mortar/solvent cement etc. and taking out of from trenches/walls, (including all fittings), with spigot and socket ends and lead joints including burning out joints if required all as directed by Engr-in-charge following bore of pipe |
| 24 | 100/110mm dia of pipes |
| 25 | 75mm dia of pipe |
| 26 | S&F PVC (SWR) single socketed in any length with rubber ring joints sealed with approved adhesive and fixed on wall with MS Clamps/brackets or in floor complete all as specified and directed. |
| 27 | 110mm dia of pipe |
| 28 | 75mm dia of pipe |
| 29 | S&F of PVC junction single 'Tee' equal provided with access door / with door opening, ISI marked, IS-14735, jointed with solvent cement of following sizes :- |
| 30 | 110mm dia of pipe |
| 31 | 75mm dia of pipe |
| 32 | S&F of PVC bend equal of any radius provided with access door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes. |
| 33 | S&F of PVC bend equal of any radius provided with access door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes. |
| 34 | S&F PVC (SWR) bends any radius of 110 mm dia |
| 35 | S&F PVC (SWR) bends any radius of 75 mm dia |
| 36 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door |
| 37 | All as per item No 18 above above but 75mm bore |
| 38 | S&F of PVC socket reducer 110mmx75mm size, ISI marked, IS-14735, jointed with solvent cement. |
| 39 | S&F of PVC cowl for 75mm size pipes, ISI marked, IS-14735, jointed with solvent cement. |
| 40 | S&F of PVC cowl for 110 mm size pipes, ISI marked, IS-14735, jointed with solvent cement. |
| 41 | S&F in repairs of PVC gully trap 150x110mm,setting and jointing with solvent cement including dismantling of surrounding concrete and fixing of gully trap with and including cement sand mortar 1:3 complete. |
| 42 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms complete all as specified and directed. |
| 43 | S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe, all as specified |
| 44 | S&F 110 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe, all as specified |
| 45 | S&F in repair vitreous china urinals bowl type flat back, size 465 x 355 x 265 mm, white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe. |
| 46 | S&F PTMT urinal spreader for fixing with 15 mm bore pipe complete all as specified |
| 47 | Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity exc. 250 liters and n.exc. 500 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks all as specified and as directed by Engr-in-Charge. |
| 48 | All as per item 29 above but of capacity exc 500 liters and n.exc. 1000 liters |
| 49 | S&F in repairs for bib taps, fancy type, cast copper alloy with crutch handle, chromium plated, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore. |
| 50 | S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed for 15mm bore complete as directed by Engr-in-charge |
| 51 | S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed by EIC . |
| 52 | S&F in repairs angle cock / stop valve fancy type 15 mm dia, cast copper alloy, chromium plated, high pressure with crutch handle screwed both ends for iron pipe or for unions. |
| 53 | S&F in repair angle cock stop valve of PTMT any colour high pressure screwed for iron pipe and fixed for 15mm bore complete as directed by Engr-in-charge |
| 54 | S&F PVC connection 450mm long with check nut for wash hand basin/ flushing cistern etc complete. |
| 55 | S&F in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe . |
| 56 | S&F in repair pillar tap of PTMT any colour high pressure screwed for iron pipe and fixed for 15mm bore complete as directed by Engr-in-charge |
| 57 | S&F in repair shower rose chromium plated with swivel joints of size 150mm cast copper alloy CP, fancy type with CP neck 9\\" long made to shape complete all as specified and as directed. |
| 58 | S&F in repair PVC flexible waste pipe (heavy duty) 32/40 mm for fixing to WHB/Kitchen sink with long screwed shanks and fly nut flanged. |
| 59 | S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, white colour, low level with inlet, ball valve, float, Flush pipe of 32 mm dia and handle including brackets incl PVC connection with CP brass nuts on both sides |
| 60 | Supply and fixing in repairs tank top cover (lid) white with locking arrangement complete of |
| 61 | Supply and fixing in repairs tank top cover (lid) white with locking arrangement complete of . |
| 62 | Supply and fixing in repairs tank top cover (lid) white with locking arrangement completeof |
| 63 | S&F in repairs for bevelled edge mirror of size 600mm x 450mm selected quality glass mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws. |
| 64 | S&F in repairs soap dish any type fixed to plugs with chromium plated brass screws. |
| 65 | S&F CP towel rail, 20mm dia, D type,60cm long between flanges complete all as approved and directed by the EIC |
| 66 | S&F in repairs Vitreous China wash basin white flat back size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, all as specified and directed by Engr-in-Charge |
| 67 | S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC). |
| 68 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding, flushing cistern and flush pipe) complete connected to p trap complete, including supply and fixing of seat cover all as directed by Engr-in-Charge. |
| 69 | S&F in repairs jet spray to EWC with PVC nozzle, PVC fish plates and PVC fish plates and PVCflexible pipe etc complite. |
| 70 | S&F grating square 150 mm size of but with waste hole of PTMT. (Minimum weight 100gms) |
| 71 | S&F pillar tap mixer cast copper alloy fancy type with capastan headsm chromium plated screwed down high pressure with or without lettered “HOT or “COLD” with long screwed shanks and fly nuts, screwed for iron pipe. |
| 72 | S&F in repair fancy CP wall mixer (3 in 1 type) with provision for both overhead shower and hand shower with 115mm long bend pipe and wall flange complete all as specified and directed. |
| 73 | S&F in repair CP Health faucet with 1.5m tube and hook. |
| 74 | S&F PVC shelf wall corner size 230 mm with all fittings/brackets complete all as specified and as directed by Engineer-in-Charge. |
| 75 | S&F in repairs chromium plated towel ring complete all as specified & directed. |
| 76 | S&F in repairs stainless steel plate rack made out of 1mm thick stainless steel sheet, overall minimum size 60cm x 90cm and for 6 plates as approved by GE. |
| 77 | S&F in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 x 460 mm, bowl size 410 x 330 x 180 mm. |
| 78 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete. |
| 79 | M & L for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed in cm (1:4) etc complete. |
| 80 | M&L for 450x350 x7 mm thick glazed ceramic tiles (Digital pattern) including highlighter colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles as directed at site |
| 81 | M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough for laying finishes complete all as specified and directed |
| 82 | Taking down existing water proofing membrane along with padding & PCC on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and M&L for plaster 10 mm thck on concrete surfaces in cement mortar 1:3 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumen primer confirm to IS - 3384-1986 @ 0.4kg per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces all as specified and directed by Engr-In- Charge |
| 83 | M&L for cement concete type B-1,1:2:4 mix (using 20 mm grade aggregate) as in Roof Padding etc finished surface even and fair without using extra cement complete all as spd & as directed. |
| 84 | Demolition of cement concrete (unreinforced) of any description and in any position and removing the rubbish from the work site. |
| 85 | M&L for preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor complete all as specified.(IWPC will be paid separately) |
| 86 | Supply only water proofing compound (liquid),ISI marked. |
| 87 | M&L PCC type C2, 1:3:6 (40 mm graded stone aggregate) as in sunken slab filling complete all as spd and as directed |
| 88 | S&F in repair GI spouts of 40 mm dia pipe , approxly 700mm long in sunken floors including necessary cutting , chipping of walls and making good with PCC 1:2:4 type B0 or cement mortar 1:3 with WPC all as specified and directed |
| 89 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n exc 1.5 sqm |
| 90 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm |
| 91 | Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete. |
| 92 | Refixing of shutter of any description n exc 1 sqm in same opening complete. |
| 93 | M&L for preparation of old treated surfaces of Ceilings including brooming down, scrapping down smoke soots etc. and appying two coat of white wash, complete all as specified and as directed. |
| 94 | M&L for preparation of old treated surfaces of wall surfaces and applying one coat of distemper with distemper oil emulsion white or tinted over and complete all as specified and as directed. |
| 95 | M&L applying 1-2mm thick wall care putty on wall surfaces all as directed by Engr-in-Charge. |
| 96 | Complete removal of existing treatment on wall surfaces and applying two coat of distemper with distemper oil emulsion white or tinted over incl primer complete all as specified and as directed by Engr-in-Charge. |
| 97 | M&L for preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 98 | M&L for preparation of old plastered or unplastered old decorated surfaces of wall and applying two coat of exterior emulsion paint over a coat of water base primer complete all as specified and as directed. |
| 99 | Taking down cement plaster any description on brick , block or stone walls etc including raking down joints hacking for key secrubing down with water etc any description |
| 100 | M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces. |
| 101 | M&L for 15 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement as specified.Note : WPC will be paid separately. |
| 102 | M&L for rendering on concrete surfaces 15mm thick in two layers first layer 10mm thick and 2nd layer 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair. Note: WPE shall be measured and paid seperately. |
| 103 | Supply only water proofing compound |
| 104 | M&L in repairs for 18-20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded. |
| 105 | M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate in sub base of floors etc. |
| 106 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 107 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 all as specified and directed. |
| 108 | M&L for preparation of new or previously untreated concrete or PCC block masonry external surfaces and applying one coat of exterior emulsion paint all as specified and directed by EIC. |
| 109 | S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staples as in Steel windows and steel ventilators including removing the rusted wire mesh fixed with nuts and bolts and fixing the wire mesh cloth at any height complete all as specified and as directed. |
| 110 | Demolition of precast concrete block walling built in any cement morter |
| 111 | M&L for block masonry with precast cement concrete type 1:2:4 (20mm graded stone aggregate) solid blocks exc 10cm in width and setting in cement mortar 1:6. Please Enable Macros to View BoQ information |
