|
| 1 | M&L for Preparation of old treated surfaces of wall including brooming down, scrapping down smoke soots, Washing, rubbing down and stopping of distempered and painted surfaces etc. and appying one coat of white wash, complete all as specified and as directed. |
| 2 | M&L for Preparation of old treated surfaces of Ceilings including brooming down, scrapping down smoke soots, Washing, rubbing down and stopping of distempered and painted surfacesetc. and appying one coat of white wash, complete all as specified and as directed. |
| 3 | M&L for Preparation of old treated surfaces of wall surfaces and applying one coat of distemper with distemper oil emulsion white or tinted over and complete all as specified and as directed. |
| 4 | M&L for Preparation of old treated surfaces of wall surfaces and applying two coat of distemper with distemper oil emulsion white or tinted over and complete all as specified and as directed. |
| 5 | M&L for applying 1-2mm thick wall care putty on wall surfaces all as directed by Engr-in-Charge. |
| 6 | M&L for Complete removal of existing treatment on wall surfaces and applying two coat of distemper with distemper oil emulsion white or tinted over incl primer complete all as specified and as directed by Engr-in-Charge. |
| 7 | M&L for preparation of Old or previously untreated concrete or PCC block masonry external surfaces and applying one coat of exterior emulsion paint (in camouflage pattern as approved by the GE) all as specified and directed by EIC. |
| 8 | M&L for preparation of plastered or unplastered old decorated surfaces of wall and applying one coat of exterior emulsion paint comlete all as specified and as directed . |
| 9 | M&L for Preparation of old wooden painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 10 | M&L for Preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 11 | M&L for preparation of old plastered or unplastered old decorated surfaces of wall and applying two coat of exterior emulsion paint over a coat of water base primer comlete all as specified and as directed using Nerolec surksha / Asian ACE / Berger Walmasta |
| 12 | M&L for writing letter or figures ( Block, roman , Italic or Indain ) n,exc 30 cm high using synthetic enamel paint |
| 13 | M&L for writing stops, commas , short lines, dashes , hypens , brackets etc using synthetic enamel paint |
| 14 | M&L for Taking down cement plaster any description on brick , block or stone walls etc including raking down joints hacking for key secrubing down with water etc any description |
| 15 | M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces. |
| 16 | M&L for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement as specified. |
| 17 | M&L for rendering on concrete surfaces 15 mm thick in two layers first layer 10mm thick and 2nd layer 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair. |
| 18 | Supply only water proofing compound |
| 19 | M&L for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed by EIC. |
| 21 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises |
| 22 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land. |
| 23 | M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate in sub base of floors etc. |
| 24 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 25 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and uncluding 15mm thick screed bed in CM 1:6 all as specified and directed. |
| 26 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 all as specified and directed. |
| 27 | M&L glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM 1:4 all as specified and directed. |
| 28 | M&L in repairs for 18-20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded. |
| 29 | M&L for Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n exc 1.5 sqm |
| 30 | M&L for Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm |
| 31 | M&L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 32 | M&L Pressed steel frames for doors size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 33 | M&L for Running welding in repairs, Thickness of metal to be welded N. Exc 6mm |
| 34 | M&L for Welding in repairs,n. exc 2.5cm in length and Thickness of metal to be welded, N. Exc 6mm thick. |
| 35 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 36 | S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. |
| 37 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 38 | S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 39 | M&L for Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 40 | S&F 4mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane |
| 41 | S&F for 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy all as specified and directed. |
| 42 | S&F for 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed. |
| 43 | S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed. |
| 44 | S&F for floor door stopper of brass body and tongue with hard drawn steel spring, overall length of cover plate 150mm and fixed all as specified and directed. |
| 45 | S&F for mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 46 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 47 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 48 | M&L for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) Note :- (i) Aluminium grill fixed under above item shall be measured and paid separately (ii) Size of Section for Fram 100x45mm and 1.20mm ThickSize of Section for shutter 85x45mm and 1.20mm thickSize of Section for wiremess shutter 40x20mm and 1.00mm thick . |
| 49 | Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm |
| 50 | M&L for Repairing/ Taking down Aluminium window/doors of any description area exc 1.00Sqm n. Exc 2.00 Sqm repairing/ retightening screws, aluminium clips and securing top & bottom rails using MS 10mm bar having both sides threading incl bolting, fixing of new rubber padding, Aluminium snap bidding, glazing clips and re-fixing resecuring in same opening completed all specified and as directed by Engineer-in-Charge |
| 51 | M&L for Resecuring without taking down Chowkhats or frames not exc. 1.5 sq. m each |
| 52 | All as per item No. 51 above but with shutters (without taking off shutters from the frames) |
| 53 | Resecuring without taking down Chowkhats or frames exc 1.5 sq. M but n exc 4 sq. m each |
| 54 | All as per item No. 53 above but with shutters (without taking off shutters from the frame) |
| 55 | M&L for Resecuring or easing & adjusting without taking down Shutters of any description n exc 1 sq. m each . |
| 56 | All as per item No. 55 above but exc 1 sq. M and n exc 2 sq. M each. |
| 57 | All as per item No. 55 above but exc 2 sq. M each. |
| 58 | S&F 18mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works |
| 59 | All as per item above but 18mm thick plain PVC celuka ply |
| 60 | All as per item above but 12mm thick plain PVC celuka ply |
| 61 | All as per item above but 05mm thick plain PVC celuka ply |
| 62 | S&F PVC coated basket for kitchen drawers of required size n. exe 0.5 Sqm and including sliding channels |
| 63 | S&F in repairs Vitreous China wash basin white flat back size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, all as spd. |
| 64 | S&F PVC connections 15mm size with PTMT nuts of length 450mm |
| 65 | S&F swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) |
| 66 | S&F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight300gms) |
| 67 | S&F in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed. |
| 68 | S&F in repairs two way angle cock 15mm chromium plate screw down screwed for iron pipe of brass ferrule etc complete all as specified and directed by EIC |
| 69 | S&F of waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed |
| 70 | S&Fin repairs for Vitrious china squattin pan ,Orrissa Paattern Size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe) |
| 71 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding, flushing cistern and flush pipe) complete connected to p trap complete, including supply and fixing of seat cover all as directed by Engr-in-Charge. |
| 72 | S&F grating square 150 mm size of but with waste hole of PTMT. (Minimum weight 100gms) |
| 73 | S&F in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, flaot and handle including brackets of 10 Ltr capacity. |
| 74 | S&F in repairs for bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore. |
| 75 | S&Fin repairs stop valve 15 mm dia cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed. |
| 76 | S&F in repairs for brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed. |
| 77 | M&L in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 78 | M&L 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 79 | S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in` cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 4460mm bowl size 410mm x 330mm x 160mm |
| 80 | S&F in repairs stainless steel plate rack made out of 1mm thick stainless steel sheet, overall minimum size 60cm x 90cm and for 6 plates as approved by GE. |
| 81 | S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 170gms) |
| 82 | S&F in repairs rotational moulded polythene white water storage tank (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 500 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) |
| 83 | All as per item No 82 above but capacity 750 ltrs (Make of tank- Sintex cat No CCWS 0075-01-TLW or equivqalent of makes given in Appendix 'B'to PS) |
| 84 | All as per item No 82 above but capacity 1000 ltrs (Make of tank - Sintex cat No CCWS 0100-01-TLW or equivqalent of makes given in Appendix 'B'to PS) |
| 85 | Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity exc. 250 liters and n.exc. 500 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks and mantioning date of cleaning on tank after clean. |
| 86 | All as per item no.85 above but of capacity exc 500 liters and n.exc. 1000 liters |
| 87 | S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) |
| 88 | Supply & fix in repairs tank top cover (lid) white/black with locking arrangement complete suitable for 500 ltr capacity complete all as specified and directed by Engineer-in-Charge. |
| 89 | All as per item No. 88 above but suitable for 750 ltr capacity complete all as specified and directed by Engineer-in-Charge. |
| 90 | All as per item No. 88 but suitable for 1000 ltr capacity complete all as specified and directed by Engineer-in-Charge. |
| 91 | Taking up or down following size of steel tubing and connections. |
| 92 | 15mm bore of pipe |
| 93 | 20mm bore of pipe |
| 94 | 25mm bore of pipe |
| 95 | S&F CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: |
| 96 | 20mm bore of pipe |
| 97 | 25mm bore of pipe |
| 98 | Dismantling of cast iron,PVC or reinforced concrete pipes jointed in cement mortar/solvent cement etc. and taking out of trenches if required all as directed by Engr-in-charge following bore of pipe |
| 99 | 100/110mm dia of pipes |
| 100 | 75mm dia of pipe |
| 101 | S&F UPVC ultra drain, pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors of following size |
| 102 | 100/110mm dia of pipes |
| 103 | 75mm dia of pipe |
| 104 | S&F of UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement of following sizes :- |
| 105 | 100/110mm dia of pipes |
| 106 | 75mm dia of pipe |
| 107 | S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia. |
| 108 | M&L PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement |
| 109 | S&F of UPVC bend equal of any radius with door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes. |
| 110 | S&F of UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes. Please Enable Macros to View BoQ information |
| 111 | S&F of UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes. Please Enable Macros to View BoQ information |
