|
| 1 | Cost toward supplying all labour tools & tackles complete dismantling of the existing MS pipe dia 750 mm along with all associated Valve and accessories including safe removal, handling and shifting of the dismantled materials out side the pump house to a designated stores location as per direction of E.I, complete in all respect. |
| 2 | Supplying materials heavy duty MS pipe having dia 750 mm, 8 mm thickness. |
| 3 | Supplying materials heavy duty MS pipe having dia 350 mm, 8 mm thickness. |
| 4 | Supplying materials heavy duty MS flange having dia 750 mm, 25 mm thickness |
| 5 | Supplying materials heavy duty MS flange having dia 350 mm, 25 mm thickness |
| 6 | Cost towards Supplying with all labour, tools & takles for making common header of heavy duty MS pipe having dia 750 mm, 8 mm thickness on delivery side along with connection of the common header to existing rising pipe with all required accessories making such as short piece, bend, rubber seal, etc. including of cutting, welding & threading etc. required as per site. |
| 7 | Cost towards Supplying with all labour, tools & takles for making 350 mm MS bend cutting, welding & necessary alteration to insure proper alignment and fitment for connection common header to pump delivery side etc. required as per site. |
| 8 | Supplying & fitting nut bolt etc as per direction of EI |
| 9 | Cost towards providing all labours, tools, tackles and technician for dismantling 600 H.P. Kirloskar make C/F pump and taking out its rotating unit for replacement of damage parts and fitting the same with consumable materials, testing on full load, including transportation cost. |
| 10 | Supply and fitting Phosphorous bronze shaft sleeve with making shaft sleeve having shank O.D. 120 mm x O.D. 104 mm x I.D. 85 mm x 325 mm long as per size and sample, finished wt. approx 10 kgs. With deducting the cost of taken out scrap materials. |
| 11 | Making, Supplying Fittting Phosphorous bronze neck ring having coller O.D. 395 mm x body O.D. 385 mm x I.D. 345 mm x 70 mm wide as per size and sample, finished wt. approx. 10 kgs. With deducting the cost of taken out scrap materials. |
| 12 | Supply Fitting Phosphorous bronze shaft sleeve check nut as per size and sample with deducting the cost of taken out scrap materials. |
| 13 | Supply Fitting ball bearing 6314 N/C3 S.K.F. make both side. |
| 14 | Cost towards balancing rotating unit assembly of 600 H.P. C/F Pump on lathe machine for centric motion. |
| 15 | Supply Fitting H.D. coupling bolt with bush as per sample. |
| 16 | Cost towards providing all labours, tools, tackles and technician for disconnecting all the electrical connections, coupling and foundations bolts, changing the position of 600 H.P. H.T. motor for repairing work with the help of chain pulley and gantry crane. |
| 17 | Cost towards dismantling and taking out coupling by pulling arrangement and opening of DE side cover by help of chain pulley with all labours and taking out DE side damaged bearing by pulling arrangement with special type equipments |
| 18 | Cost toward making new rotating shaft new maching as per sample and size with key ghat cutting as per required size.(EN 18) Finished weight 59 Kg. |
| 19 | Cost toward bearing housing new maching as per sample and size OD 220 mm, ID 75 mm length 65 mm |
| 20 | Cost toward shaft fitting by press machine with shaft sleeve set etc all complete. |
| 21 | Cost towards rotating shaft and imeller bush etc all roound machins. Please Enable Macros to View BoQ information |
