|
| 1 | PROVIDING AND INSTALLATION OF HIGHMAST AS PER GIVEN PLACES |
| 2 | Providing Solar LED Mini high-Mast installation at Chafavali- Chafanath Mandir Tal- Sangmeshwar Dist- Ratnagiri |
| 3 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 4 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 5 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 6 | Providing Solar LED Mini high-Mast installation at Devale- Khadgeshwar Mandir Tal- Sangmeshwar Dist- Ratnagiri |
| 7 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 8 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 9 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back |
| 10 | Providing Solar LED Mini high-Mast installation at Prabhanvali- Shri. Ballal Ganesh Mandir Tal- Lanja Dist- Ratnagiri |
| 11 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 12 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 13 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 14 | Providing Solar LED Mini high-Mast installation at Veravali bu.- Kedarling Mandir Tal- Lanja Dist- Ratnagiri |
| 15 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 16 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 17 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 18 | Providing Solar LED Mini high-Mast installation at Isavali - Navlaidevi Mandir Tal- Lanja Dist- Ratnagiri |
| 19 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 20 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 21 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 22 | Providing Solar LED Mini high-Mast installation at Kondaye - Dhanin Ravalnath Mandir Tal- Lanja Dist- Ratnagiri |
| 23 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 24 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 25 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 26 | Providing Solar LED Mini high-Mast installation at Bhambed - Mahalaxmi Datta Mandir Tal- Lanja Dist- Ratnagiri |
| 27 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 28 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 29 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 30 | Providing Solar LED Mini high-Mast installation at Khanavali - Suryamukhi Datt Mandir Tal- Lanja Dist- Ratnagiri |
| 31 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 32 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 33 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 34 | Providing Solar LED Mini high-Mast installation at Mithgavane - Shri. Dev Anjaneshwar Mandir Tal- Rajapur Dist- Ratnagiri |
| 35 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 36 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 37 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 38 | Providing Solar LED Mini high-Mast installation at Unhhale - Gangatirth Tal- Rajapur Dist- Ratnagiri |
| 39 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 40 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 41 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 42 | Providing Solar LED Mini high-Mast installation at Kasheli - Kankaditya Mandir Tal- Rajapur Dist- Ratnagiri |
| 43 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 44 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 45 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 46 | Providing Solar LED Mini high-Mast installation at Sagave - Katradevi Tal- Rajapur Dist- Ratnagiri |
| 47 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 48 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 49 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 50 | Providing Solar LED Mini high-Mast installation at Devihasol - Aryadurga Mandir Tal- Rajapur Dist- Ratnagiri |
| 51 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 52 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 53 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 54 | Providing Solar LED Mini high-Mast installation at Rayapatan - Datt dasanche swami mahadevnandanji Dattmandir Tal- Rajapur Dist- Ratnagiri |
| 55 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 56 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 57 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 58 | Providing Solar LED Mini high-Mast installation at Bhalavali - Jakadevi Mandir Tal- Rajapur Dist- Ratnagiri |
| 59 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 60 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 61 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 62 | Providing Solar LED Mini high-Mast installation at Ansure - Shri. Gireshwar Mandir Tal- Rajapur Dist- Ratnagiri |
| 63 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 64 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 65 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 66 | Providing Solar LED Mini high-Mast installation at Kelavali - Shri. Kshetr pimpalpar gagangiri maharaj ashram Mandir Tal- Rajapur Dist- Ratnagiri |
| 67 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 68 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 69 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 70 | Providing Solar LED Mini high-Mast installation at Oni - Vimleshwar Mandir Tal- Rajapur Dist- Ratnagiri |
| 71 | Item No.1 - Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warranty) ( PWD Ele CSR 2020-21 P/I-4.3.14) 203995+5%= 214194.75 |
| 72 | Item No.2 -Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.( PWD Ele DSR 2022-23 P/I-6.1.19) 186+5%= 195.3 |
| 73 | Item No.3 -Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade.( PWD SSR 2022-23 P/I-66/6.53) 4110 |
| 74 | GST Please Enable Macros to View BoQ information |
