|
| 1 | Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries , T & P & all other machinaries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge. |
| 2 | SAND FILLING :-Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of 0.3 mtr, with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. All complete as per directions of the Engineer -in-charge. |
| 3 | Situ reinforced :-providing cast in situ reinforce cement concrete bored single under reamed pile of M-20 grade 300mm.dia bore with single under reamed of 2.5 times the bore dia design to carry the desing safe load using bentonite & casing & treaming of pile & driving the case up to required depth with supply of all labours tool & plants and all taxes and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. All complete as per directions of the Engineer -in-charge. |
| 4 | Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ) , mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc.complete as per the directions of Engineer-in-charge. |
| 5 | Filling foundation and plinth with excavated materials well watered and rammed etc.complete as per direction of the Engineer-in-charge. |
| 6 | Providing RCC M-20 grade concrete using 20mm down graded CBHG chips including all cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc.complete as per the directions of Engineer-in-charge. |
| 7 | Providing,supplying and constructing in Foundation and plinth brick masonary in cement martar (1:6) with 1st quality approved fly ash bricks having minimum crushing strength 75 kg/sqcm including socking the bricks in water vat for 24 hours before use in all levels ranking out of the joints, including cost of all materials ,transportation,curing,loading,unloading,labour T & P taxes,duties,levies,royalities etc complete as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.(Foundation & plinth) |
| 8 | Providing,supplying and constructing in superstructure (up to 3mt height Ground floor) brick masonary in cement martar (1:6) with 1st quality approved fly ash bricks having minimum crushing strength 75 kg/sqcm including socking the bricks in water vat for 24 hours before use in all levels ranking out of the joints, including cost of all materials ,transportation,curing,loading,unloading,labour T & P taxes,duties,levies,royalities etc complete as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.(up to 3mt height Ground floor) |
| 9 | Providing,supplying and constructing in Foundation and plinth brick masonary in cement martar (1:4) with 1st quality approved fly ash bricks having minimum crushing strength 75 kg/sqcm including socking the bricks in water vat for 24 hours before use in all levels ranking out of the joints, including cost of all materials ,transportation,curing,loading,unloading,labour T & P taxes,duties,levies,royalities etc complete as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.(Foundation & plinth) |
| 10 | Providing,supplying and constructing in Above plinth brick masonary in cement martar (1:4) with 1st quality approved fly ash bricks having minimum crushing strength 75 kg/sqcm including socking the bricks in water vat for 24 hours before use in all levels ranking out of the joints, including cost of all materials ,transportation,curing,loading,unloading,labour T & P taxes,duties,levies,royalities etc complete as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.(Above plinth) |
| 11 | R.C.C. M20 :-Providing in position machine mixed and machine vibrated design mix cement concrete of M20 grade for reinforced cement concrete work including laying of concrete using 12 mm - 20 mm size crusher broken hard granite chips excluding the cost of centering, shuttering, and reinforcement but including admixture in recommended proportions to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- In - Charge. including cost all materials, conveyance , royalties and taxes, loading and unloading cost of all labour,sundries, T&P etc.complete.Gread Beam/Pinth Band |
| 12 | R.C.C. M20 :-Providing in position machine mixed and machine vibrated design mix cement concrete of M20 grade for reinforced cement concrete work including laying of concrete using 12 mm - 20 mm size crusher broken hard granite chips excluding the cost of centering, shuttering, and reinforcement but including admixture in recommended proportions to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- In - Charge. including cost all materials, conveyance , royalties and taxes, loading and unloading cost of all labour,sundries, T&P etc.complete.Column & Beam- Ground Floor |
| 13 | R.C.C. M20 :-Providing in position machine mixed and machine vibrated design mix cement concrete of M20 grade for reinforced cement concrete work including laying of concrete using 12 mm - 20 mm size crusher broken hard granite chips excluding the cost of centering, shuttering, and reinforcement but including admixture in recommended proportions to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- In - Charge. including cost all materials, conveyance , royalties and taxes, loading and unloading cost of all labour,sundries, T&P etc.Roof Slab ( Ground Floor) |
| 14 | R.C.C. M20 :-Providing in position machine mixed and machine vibrated design mix cement concrete of M20 grade for reinforced cement concrete work including laying of concrete using 12 mm - 20 mm size crusher broken hard granite chips excluding the cost of centering, shuttering, and reinforcement but including admixture in recommended proportions to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- In - Charge. including cost all materials, conveyance , royalties and taxes, loading and unloading cost of all labour,sundries, T&P etc.RCC Chajja (Ground Floor) |
| 15 | R.C.C. M20 :-Providing in position machine mixed and machine vibrated design mix cement concrete of M20 grade for reinforced cement concrete work including laying of concrete using 12 mm - 20 mm size crusher broken hard granite chips excluding the cost of centering, shuttering, and reinforcement but including admixture in recommended proportions to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- In - Charge. including cost all materials, conveyance , royalties and taxes, loading and unloading cost of all labour,sundries, T&P etc.Lintel (GROUND FLOOR) |
| 16 | Providing M.S reinforcement for RCC work including cutting, bendind,binding & tying the grills and placing in position including cost of binding wire 18 to 20 gauge as per drawing & technical specification. ( Taking output - 1MT ) (Ground Floor) |
| 17 | Supplying,fitting,fixing of M.S shutter with frame with M.S angle of (35 x 35 x 6)mm and shutter sectionof 30 x 30 x 5mm with weldingof 25 x 6mm flat and welding of 16 gauge C R Sheet with arrangement of clamp,fitting of 3 nos 4\\" hinges,1 no of 2\\"hinges and 300mm x 16mm M.S Aldrop with 8\\" tower bolt including cost,conveyance,taxes of all materials labour T & P etc.required for the complete in all respect. etc. |
| 18 | 2.5 cm thick Damp proof course with cement concrete (1:2:4) using 12mm size CBHG chips including all cost, conveyance, royalty & taxes etc.comp.to work site for new work as per the specification approved by the department & direction of E.I.C (data per 1sqm) ( Ground Floor) |
| 19 | 2.5 cm thick A.S Flooring C.C (1:2:4) using 12mm size chips including all cost, conveyance, royalty & taxes etc.comp.to work site for new work as per the specification approved by the department & direction of E.I.C (data per 1sqm) (1st Floor) |
| 20 | 12 mm Plastering :-Providing 12mm thick cement plaster to the surface of wall with cement mortar (1:4) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge. (Ground Floor) |
| 21 | 12 mm Plastering :-Providing 12mm thick cement plaster to the surface of wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge. (Ground Floor) |
| 22 | 16 mm Plastering :-Providing 16mm thick cement plaster to the surface of wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge. (Ground floor) |
| 23 | 6 mm Plastering to ceiling :-Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge. (Ground floor) |
| 24 | Providing cement concrete (1:2:4) using 12mm size black hard crusher broken granite stone chips, screened & washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machinaries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump (GROUND FLOOR) etc.complete in all respect as per latest specification & direction of the Engineer in charge. |
| 25 | Supplying & fixing of Antiskid ceramic tiles(30cmx30cm) in floors on 25mm thick over bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shade of tiles including all cost and materials etc complete as directed by the Engineer-in-charge. (Ground Floor) |
| 26 | Supplying & fixing of ceramic wall tiles(30cmx30cm) in dados striking and rises of steps on 12mm cement plaster ( 1:3 ) jointed with neat cement slury mixed with pigment to match the shade of the tiles including rubbing and polishing complete directed by the Engineer-in-charge.(Ground Floor) |
| 27 | Supplying,fitting and fixing of M.S iron grill/gate made out of structure steel angle sheet flat/square bar etc.for grill of approved design including all cost conveyance taxes etc.complete. |
| 28 | Synthetic Enamel Paint to steel work :-Painting synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats on new work over a coat of suitable shade with primer of approved brand and manufacturer's instructions including cost of all materials with taxes and transportation, all labour, scaffolding, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge.(Ground floor) |
| 29 | Providing and panting wall surface one coat with wall primer to give an even shed before applying paint to walls including cost of primer labour T&P all comp.imcluding cost colour paint etc of all materials,labour T&P required for the work complete. etc. All complete as per the direction of the Engineer -in-charge. |
| 30 | Weather Coat :-Painting two coats with Water soluble weather coat paints of approved shade of approved make or equivalent over out side brick wall over a coat of primer, by means of brush to outside surface of new walls after scraping, cleaning the surface including all cost of materials, scaffolding, labour, watering & curing T&P etc complete as per direction of Engineer -in-charge.(Ground Floor) |
| 31 | Providing two coats of plastic emulsion paint of approved shade on new work to give an shade including necessary preparation of surface cost & conveyance of material labour T&P etc .complete to shape as per direction of the Engineer in charge. |
| 32 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern etc. complete. |
| 33 | Providing and supplying PVC door made by sintex with 24mm thick factory made shutters & 40mm chowkhat with style rails and panels PVC extruded sections in different colours,hinges,screws & fittings including all materials & labour etc.complete as per direction of EIC. |
| 34 | Supplying fitting & fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame shutter and all fittings and fixtures etc.complete ref A/R-2022-P 236 item-12 |
| 35 | Clearing and grubbing the road land including uprooting rank vegetation grass bushes shrubs etc complete. |
| 36 | Loosening leveling and compacting original ground scarified to a depth of 150mm thick. |
| 37 | Construction of embankment with approved materials obtained from borrow pit with all lift & leads transporting to site by mechanical means with a lead of 5 Kms,spreading grading to a required slope & compacting to meet requirment of table 300-2&clause 305 of mosrt & H specification for road & bridge work (AR-06,P-157,ITEM NO -35) |
| 38 | Fine dressing & turfing with initial lead 50m & 1.5m initial lift by mechanical means as per direction of EIC. |
| 39 | Electricfication works as per required electrical items etc complete.as directed by the Engineer-in-charge.Payment made as per actual by work done detail estimate from GED or NESCO JE, after completion of the work. |
| 40 | P.H Works Please Enable Macros to View BoQ information |
