|
| 1 | Earth work in cutting or in embankment in ordinary soil,excation to be in the form of regular pits not exceeding 0.5m in depth etc. Asper S.I.No.-253. |
| 2 | Excavation for foundation in ordinary soil including normal lead and lift with all completion of work and including disposal upto three chain minimum. As per SI no-251.Schedule Rate |
| 3 | Concrete with 40mm gauge brick ballast / stone ballast ,f/sand & cement in proportion of 8;4;1 in foundation and under floors including supply of all materials,labour and T & P etc,required for proper completion of the work.As per SI No-275 |
| 4 | Construction of g well graded Granular sub-base by providing material,spreading in uniform layers with motor grader on prepared surface ,mixing by mix in place method with rotavator at at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 5 | First class b/w in 1:4 in cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc required for proper completion of work. Asper S.I.No.305(b) |
| 6 | Supply of 80 mm thick Rubber mould zig zag mechanically compressed inter locking cement concrete pavers block manufatured by high pressure and controlled by vibration making havuing plant dimention 200* and also including laying of interl;ocking otiles including leveling and desssing of surface in reguired level and slope filling joints with F/sand over previously laid WBM surface with cushion of average 50mm thick F/savd including cost of materials & labours T & P etc required for proper completion of the work directed by E/I . |
| 7 | Cement Concrete in 1:2:4 in cement, coarse sand and 20mm guage stoe ballast in foundation and floor including supply of all materials, labours, T&P,etc. required for proper completion of the work.As per SI.no-279.(b) |
| 8 | 12mm thick cement plaster in 1:3 cement and C.sand moltar including supply of all material, labour and T&P, etc. required for proper completion of work as per SI no- 583. Schedule Rate |
| 9 | Providing & laying R.C.C.in 1:2:4 cement C/Sand/20mm sg not less than strength M150 (1 cement: 2 approved course sand& course stone grit 20mm nominal size) AS SI NO 284 (a) |
| 10 | M/S work or iron work in R.C.C. work S.I.504 |
| 11 | Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.SI NO. 642 |
| 12 | Supply and Fixing of LED Street Light fitting with mandatory driver set having die cast Al Body with tuffened glass uv stablized pc cover and Lenses suitable for 75W to 90W and confirming to IP 66 and IK 07 and above protection having company logo engraved complete in all respect including labour 9000-10800 system lumen LED with l/w,PF >095 ,THD<10atfullload,CRI>70,potted driver set in metal housing(Not Circulary) phase to phase protection at 440V and>300V auto cut and restart feature with 5 year warrenty. (UP PWD SOR 2024 Item No. 23.16 CAT AAA) |
| 13 | Making Connection of each street light fitting by 1.5 sq mm 3 core flexible copper from pole connector to street light fitting.(Quotation) |
| 14 | Supply and Laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core SI NO.501 (k) (UP PWD SOR 2024 Item No. 20a.1.9) |
| 15 | Supply and Laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top. On the cable run shall be fixed on M.S. clamps etc. for suitable size or as directed by Engineer - Incharge complete in all respect. The cable shall be properly conncted with the earth conductor by clamps etc. 25sqmm 3 1/2 core.(UP PWD SOR 2024 Item No. 20a.1.10) |
| 16 | Supply and Making end termination with brass compression gland and aluminium lugs for 3.5x35sqmm (32mm)size size of PVC insulated and PVC sheathed/XLPE AL conductor cable of 1.1 KV grade as required. (DSR 2022 Item No. 9.1.20) |
| 17 | S/F of SPMCB for single arm pole controlling of street light including cost of din mounting rail,connecting strip,earth link etc complete in all respect.(DSR 2022 Item No.2.10.1) |
| 18 | S/F of 32A/415V Triple pole with neutral HRC Fuse unit Main switch .(Quotation) |
| 19 | Supply and burring of safe Earthing electrode 9Hot Dipped Galvenized0 Length upto 3000mm.(Quotation) |
| 20 | Supply & Laying 6 SWG GI wire at 0.50m below ground level for conductor earth electrode,including connection /terminating with GI nut bolts, spring ,washer etc as required.(DSR 2022 Item No. 5.7) |
| 21 | Supply and fixing of granite stone information board i/c letter writing etc at site Please Enable Macros to View BoQ information |
