|
| 1 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of brick work /stone masonry masonry built in cement mortar of any description all as specified and directed. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed |
| 4 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed |
| 5 | Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqm each etc complete all as specified and as directed |
| 6 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed |
| 7 | Demoition of Stone slabs and tiles of any description or thickness in floors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise etc complete all as specified and as directed |
| 9 | Taking up or down 15mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 10 | Taking up or down 20 mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 11 | Dismantling water tanks and removing to store (exc 250 litre and not exc 500 ltr capacity) etc complete all as specified and as directed |
| 12 | Dismantling water tanks and removing to store (exc 500 and not exc 1000 ltr capacity) etc complete all as specified and as directed |
| 13 | Demolition and breaking up drain pipes up to 100 mm dia bofe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar etc complete all as specified and as directed |
| 14 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed |
| 15 | Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed |
| 17 | Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet) etc complete all as specified and as directed |
| 18 | Material and labour for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed. |
| 19 | Material and labour for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed |
| 20 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 21 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 22 | Supply and fix in repairs 7 to 8 mm hollow profile thickness thick PVC Coloured Sheet (any Shape, coloured, pattern as approved ) suitably placed in false ceiling incl making sunken side corner, design as directed etc incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed (Make - Rajashree/ Magama /Syntax or any other equivalent make as approved by GE) |
| 23 | Supply and fix in repairs 7 to 8 mm Hollow Profile thickness, Printed colour PVC sheet (Any size, shape, Texture as approved) in strips & channel feathered at the edges for fixing on Wall cladding / Vertical surface and fixing at site incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed (Make - Rajashree/ Magama /Syntax or any other equivalent make as approved by GE) |
| 24 | Supply and fix false ceiling with suspended system of size 600X600mm of standard section consisting of main runner of size 15X32mmX0.30mm thick , cross Tee (15X32mmX0.30mm) and wall angle (15X15mm X0.30mm , ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with 4 mm thick E board HPSC self textured design pre primered non asbestos fibre cement building boards fixed to false ceiling etc complete all as specified and as directed |
| 25 | Material and labour for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed |
| 26 | Material and labour for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed |
| 27 | Material and labour for Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and as directed |
| 28 | Material and labour for Rendering 10 mm thick in CM 1:3 for backing coat of tiles / dado etc complete all as specified and as directed |
| 29 | Material and labour for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed |
| 30 | Material and labour for Glossy Finished Glazed ceramic tiles (Coloured) as in vertical surface 600X300X7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed |
| 31 | Material and labour for Glossy Finished Glazed ceramic tiles (Coloured) as in vertical surface 300X450Xmm X7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed |
| 32 | Material and labour for Glossy Finished Non - skid ceramic coloured tiles of size 600mmX600mmX8mm thick as in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed |
| 33 | All as per item no 32 avove but as in vertical surface etc complete all as specified and as directed |
| 34 | Material and labour for Virified Ceramic tiles (Light Shade) 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed |
| 35 | All as per item no 34 avove but as in vertical surface etc complete all as specified and as directed |
| 36 | Material and labour for 18 to 20mm thick granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round etc complete all as specified and as directed |
| 37 | Material and labour for Heavy duty parking tiles (Coloured) 8 to 9 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed |
| 38 | Material and labour Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and as directed |
| 39 | Material and labour for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed |
| 40 | Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 41 | Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 42 | Supply only water proofing compound (Liquid) complete all as specified and as directed. |
| 43 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed |
| 44 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respective items. |
| 45 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed Note - Particle Board & Glass shall be measured and paid separately under respective items. |
| 46 | Supply and fix in repairs Aluminium Powder Coating (minimum thickness of powder coating 50 micron frame in aluminium partions having horizontal & vertical distance between two frames not exc 1.00 m & section of size 50 mm x 44.5mm of 16 guage of such type arrangement for fixing glass/pre-laminated board on both/one side complete with fixed in brick masonary/conc work by necessary drilling & rawl plug arrangement in (floor/glass/etc.) incl taking down existing wall partition incl taking down existing partition of any description etc complete all as specified and as directed Note - Glass / particle board shall be measured and paid separately under respective items. |
| 47 | Supply and fix in repair 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, incl pivet, hinges , Stainless steel handle 02 nos (250mm long) incl fixing arrangements, etc complete all as specified and as directed . |
| 48 | Supply and fix in repairs door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg with alumnium die cost body etc complete all as specified and as directed |
| 49 | Supply and fix in repairs double action floor springs, hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heave duty and fixed etc complete all as specified and as directed |
| 50 | Supply and fix solid PVC frame (Single Rebated) of size 50X47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold the doors properly for a long life) |
| 51 | Supply and fix factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed. |
| 52 | Supply and fix 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed |
| 53 | Supply and fix in repairs factory made powder coated uPVC colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories incl door sapng, lever handle, standard cylinder, centre stirker, 3 D hinges, striker, drainag, galzing bridge, silicon sealant etc . (Note: The unit rate quoted by contractor excludes cost of glass, wire cloth and includes all other connected accessories. |
| 54 | Material and labour Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed |
| 55 | Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed ' |
| 56 | Supply and fix 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed |
| 57 | Supply and fix 8 mm Aluminium composite panel, exterior grade, with both side decorative choice lamination & fixed with screws in Door / Partiton work etc omplete all as specified and as directed |
| 58 | Supply and fix 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 59 | Supply and fix 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 60 | Supply and fix Fancy type Brass barrel tower bolts bolt 200mm long of extruded section etc complete all as specified and as directed |
| 61 | Supply and fix Fancy type Brass handles 150mm long, cast type, anodised etc complete all as specified and as directed |
| 62 | Supply and fix Fancy type Brass, sliding door bolt 300mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc complete all as specified and as directed |
| 63 | Supply and fix Fancy type Brass Door stopper Overall length of cover plate 150 mm long Ditto, but of brass body and tongue with hard drawn steel spring etc complete all as specified and as directed |
| 64 | Supply and fix in repairs vitreous China wash down one piece water closet pan (EWC) Italian collection (RENE Starwhite) of size 59cm x 36cm x 71cm,(pedestal pattern),complete series, white, including vitreous China flushing cistern (inbuilt with EWC) & plastic water closet seat white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device incl connection to drain (out going pipe) and to flushing pipe, antisyphonage pipe,etc complete all as specified and directed by Engr-in-charge. Make :- Hindware, Cat No. 92088 (S-30). |
| 65 | Supply and fix in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed, Make Cat no 4018 of Prayag of equlavent make of Cera) |
| 66 | Supply and fix in repairs viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest 'P' trap including connecting to trap incl S trap or P trap and flush pipe anti-symphonage pipe etc complete all as specified and as directed |
| 67 | Supply and fix in repair Table Top Basin,Size: 500x425x130 mm incl 32 mm dia bore coupling, waste pipe etc ( of Make - FLS-WHT-5935 ( FLORENTINE Series) of Jaquar series incl fixing etc complete all as specified and as directed |
| 68 | Supply and fix in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and including, 32 mm bore waste CP coupling and 32mm bore LDPE pipe 600 mm long and 15 mm bore 450 mm long PVC connection etc complete all as specified and directed. |
| 69 | Supply and fix in repairs Viterous China urinals, Full Stall stall type, complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, incl urinal spreader 15 mm bore, suitable size of 15 mm bore PVC connection 450 mm long and 40 mm dia bore 600 mm long LDPE incl 40 mm dia bore waste coupling etc complete all as specified and as directed |
| 70 | Supply and fix in repairs PVC deo flushing cisrern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag of equlavent make of Cera) |
| 71 | Supply and fix in repairs 15 mm dia bore Brass Brass CP mixer (Wall, Sink and Basin mixer) for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and as directed |
| 72 | Supply and fix in repairs 15 mm pillar taps tall body chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No 6803 Marcus series of Prayag or equivalent make as specified in CA) |
| 73 | Supply and fix in repairs 100mm (4\\") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-67 of Prayag or equivalent make as specified in CA) |
| 74 | Supply and fix in repairs 15mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No 6810 Marcus series of Prayag or equivalent make as specified in CA) |
| 75 | Supply and fix Bib Cock 2 way double handle with CP flange as fixed in repair all as specified and as directed. (Cat No-6812 Marcus series of Prayag or equivalent make as specified in CA) |
| 76 | Supply and fix chromium plated long body bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed. (Cat No-6808 Marcus series of Prayag or equivalent make as specified in CA) |
| 77 | Supply and fix in repairs Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed (Cat No-BEA-41 of Prayag or equivalent make as specified in CA) |
| 78 | Supply and fix in repairs Towel rail stainless steel glossy finish complete all as specified and as directed. (Cat No-BA10S of prayag or equivalent make as specified in CA) |
| 79 | Supply and fix in repairs Towel rack Brass glossy finish complete all as specified and directed (Cat No BA-03 of Prayag or equivalent make as specified in CA) |
| 80 | Supply and fix in repairs Towel ring Brass glossy finish complete all as specified and directed (Cat No BA-02 of Prayag or equivalent make as specified in CA) |
| 81 | Supply and fix in repairs Soap dish chromium plated brass all as per Cat Part No BA-45 of Prayag or equivlaent makes fixed in wall as per manufacturers instruction. |
| 82 | Supply and fix in repairs 5mm thick Looking mirror of selected quality area exc 0.72 Sqm but not exc 1.00 sqm etc fixed to 4 Nos of Studs etc complete all as specified and as directed |
| 83 | Supply and fix in repairs Unbreakable (Square) wall mounted shelf 500mm (Cat No BEA-191A of Prayag or equivalent make as specified in CA) etc complete all as specified and as directed |
| 84 | Supply and fix in repairs Unbreakable corner shelf (3Pcs set i.e 8\\"-1, 10\\"-1 & 12\\"-1) (Cat No BEA-44A of Prayag or equivalent make as specified in CA) etc complete all as specified and as directed |
| 85 | Supply and fix in repairs Toilet paper holder (Cat No BA-18 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instructions etc complete all as specified and as directed |
| 86 | Supply and fix in repair kitchen sink made of stainless steel 1mm thick kitchen with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets or fixing in granite slab and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed |
| 87 | Supply and fix GI Tubes, 15 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed |
| 88 | Supply and fix GI Tubes, 20 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed |
| 89 | Supply and fix rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed |
| 90 | Supply and fix rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed |
| 91 | Supply and fix in repairs 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed. |
| 92 | Supply and fix in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed |
| 93 | Supply and fix 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls /Floors etc complete all as specified and directed |
| 94 | Supply and fix 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls /Floor etc complete all as specified and directed |
| 95 | Supply and fix PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed |
| 96 | Supply and fix PVC vent cowls of 110mm dia etc complete all as specified and as directed |
| 97 | Supply and fix PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed |
| 98 | Supply and fix in repairs stainless steel decorative curtain rod of 25 mm bore incl fancy finale caps cap (02 nos in each curtain rod) Length exc 1.30 mtr but not exc 1.80 mtr etc complete all as specified and as directed |
| 99 | Supply and fix in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed |
| 100 | Supply and fix in reapirs 18mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling / cub board shutter, Kitchen shelves and modular kitchen shutter, shelves, drawers etc over 0.90 mm thick decorative laminate type 1, of surface finish (both side of shutter), colour and pattern as approved, fixed with approved adhesive as per maker's instructions etc complete all as specified and as directed |
| 101 | Supply and fix in repiars Stainless steel auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment + 2.50mm & depth adjustment 4mm complete all as specified. |
| 102 | Supply and fix in repairs 1.25mm thick rolling shutter gear opeated type with level gear box and crank handle as specified including top cuver, anchoring rod, hasp and staple and one shop coat of primer erected in postion as indicated, complete all as specified and as directed |
| 103 | Material and labour for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed |
| 104 | Material and labour for preparing newely plastered surface of ceiling and applying two of acrylic coats distemper white or tinted over a coat of primer etc complete all as specified and as directed |
| 105 | Material and labour for Preparing new plastered suface of walls and applying two coats of acrylic distemper , white or tinted over a coat of primer etc complete all as specified and as directed |
| 106 | Material and labour for preparation old plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed |
| 107 | Material and labour Cutting chases, pinning in, making good to facingsin brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed pipe line etc. and making good, cutting exceeding 20cm girth etc complete all a specified and as directed |
| 108 | Material and labour for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed Please Enable Macros to View BoQ information |
