|
| 1 | SITC of hot dip galvanised, High Mast Lighting Pole, made of 3mm nominal thick high carbon steel, polygonal section and of following height, along with head frame and movable luminaire carriage to mount up to following nos of fittings, having opening at bottom with vandal proof locking arrangement, power operated double drum winch, 316 grade S.S hoisting ropes, flexible multicore trailing cable, integral power tool motor, manual handle, bolts & nuts, anchor plate & template, lightning finial, aviation light connections to control panel with suitable cabling, etc. complete with supply and fixing the following as per specifications detailed below.The winch should be of motorized & manual type .the capacity of motor 1.5 hp Is: 12615 .Lubrication self in oil bath .The high mast installation shall be capable of withstanding wind speed / wind load as per IS: 875/1987 (Part-III) and erected using foundation bolts on RCC foundation of suitable size as per IS 456 and as per manufacurer's design, with embeded, 75mm dia, B' class GI pipe for cable entry, plastering, finishing including etc. all complete as required (The rate is inclusive of CC foundation as per OEM) Height - 16 mtrs, Bottom - 360 mm,Top - 200 mm with luminaire carriage to mount minimum 8 Nos fittings. Make Wipro/ Surya/ Volmont/Utkarash/Ventura/Transrail as approved by Engineer in charge. |
| 2 | Supply & erection of outdoor stand mounted feeder pillar 415 v, 16 kw constructed fabricated with 1.6 mm tick crca steel sheet with 4 way terminal for input supply, TPN MCB 32 amp incomer,3pole contactor 30 amp(AC1) for lighting,toggle switch 6 amp for auto manual selection, Timer Digital type, 4 way terminal for output lights ,single pole mcb 10 amp 10 ka , overload relay 2.5 a-4 a, contactor for motor control, 9amp(AC3) ,3 way terminal output for motor, led indicator lights for fwd/reverse ,push switch for motor operation, rotary switch for FWD/REV, pendent box for motor operation, terminal block for 25 sq. mm incomer cable of and 16 & 2.5 sq. mm for out going cables, connections testing and commissioning, etc as required (As per OEM of HM poles) make L&T/Siemens/ Schneider as approved by Eingineer in Charge. |
| 3 | Supply, Installation, Testing & Commissioning of 250 W +/-10 W Integral LED Floodlight luminaire, tempered glass cover, individual lense over LED ,cradle mounted, Al Pressure Die cast Housing and PC Lens Diifuser having minimum system lumen output 42000 lumens, system lumen efficacy of 120 lm/W with P.F.>0.95 and THD<10% , CRI 70, CCT 5700K. The luminaire shall have IP66 protection, IK10 Protection with availability of narrow and wide beam angles of 60 degree, 22 degree. The LED shall be compliant with Useful L70 life of >50000 Hrs. Driver efficiency should be 85% in input voltage range of 140V to 280V (nominal rated voltage – 240V) with 10 KV internal surge protection. Electrical Insulation Class I. (For Fixing in High Mast Light, 8 nos fitting in each high mast) Make Wipro/Havells/LT/HPL/Jaquar Surya/ Philips as approved by Engineer in charge. |
| 4 | Supplying and testing of following size one number XLPE insulated and PVC sheathed armoured aluminium conductor power cable of 1.1 kV grade conforming to IS 7098 (Part 1) 1988 as required.4 X 16 sq. mm (For High Mast light) |
| 5 | 4 X 16 sq. mm (For High Mast light) |
| 6 | 4 X 10 sq. mm (For decorative pole ) |
| 7 | 2 X 10 sq. mm (For decorative pole ) |
| 8 | Supplying and fixingMCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator.Make:-L&T /legrand/Hager /ABB Engineer-in -charge. |
| 9 | 12 way, double door. |
| 10 | Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-.Make:-L&T /legrand/Hager /ABB as approved by Engineer-in -charge. |
| 11 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make:-L&T /legrand/Hager /ABB as approved by Engineer-in -charge. |
| 12 | 40 Amp, double pole, (single phase and neutral) |
| 13 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make:-L&T /legrand/ Hager /Schneider as approved by Engineer-in -charge. |
| 14 | Single pole. |
| 15 | Supplying and fixing 32 amps rating, 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of four poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make:-L&T /legrand/Hager/ABB as approved by Engineer-in -charge. |
| 16 | Providing, laying and fixing of PVC round sheathed 3 core 2.5 sqmm FRLS copper conductor flexible cable for voltage grade up to 1100 volt , as required complete in all respect. Make :-Finolex/Havell/Polycab/Plaza as approved by Engineer in charge. |
| 17 | Supplying and fixing true power make advanced earthing system having GI pipe 3 meter long 50 mm dia with terminal size 50x6 mm ,internal strip size 25x3 with 50 Kg compound including exvation of pit and refiling the same and making earthing pit cover 12 inch dia as required complete in all respect. make :- make :-True power ,Earth plus,Ashloka as approved Engineer-in -charge. |
| 18 | Providing and fixing 4.00 mm dia G.I wire on surface or in recess for loop earthing as required. |
| 19 | Supply and fixing of following watts LED Stree light 90 watt +/- 10% watts IP 66 Alminum Die cast Pressure Housing, PC lens diffuser with integratedoptics to ensure uniform distribution having minimum system lumen efficacy of 140 lm/Watt and total lumen flux 12600 lumens with beam angle of 120 degree with P.F.>0.95 and THD<10% ,CRI >70. he LED shall be compliant with Useful L70 life of >50000 HrS The surge protection shall be 4 KV inbuilt and additional SPD 10KV shall be inside the luminaire.The input voltage range of 140V to 300V . Make Philips/Wipro/Jaquar/LT/Havells/HPLas approved by Engineer-in-Charge.(five year warranty) |
| 20 | Supplying and erection of decorative Galvanised mild steel pole fitted with aluminium ,steel embellishments duly polyurethane paint coated of 9 Meter with single arm 1.5 long G.I bracket long having 114 mm dia at bottom and 60 mm at top with cast alumunium embellishments . The pole are primer coated and painted with polyurethane paint.The pole has aservice window at bottom comprising four way 25 amp connector terminal and a mcb.The pole has mild stel base plate having four nos. mounting holes and can be mounted four nos. anchor bolts. having nominal bore dia. 100 mm and dia. 4.85 mm thickness, planting depth 120 cm with pit depth 135 cm including fixing up to a given depth below G/L.The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, complete in all respects as required:- Make:- Twinkle/Mayfair/Valmont/Transrail/Ventura |
| 21 | Supplying and erection of decorative Galvanised mild steel pole fitted with aluminium ,steel embellishments duly polyurethane paint coated of 9 Meter with double arm 1.5 long G.I bracket long having 114 mm dia at bottom and 60 mm at top with cast alumunium embellishments . The pole are primer coated and painted with polyurethane paint.The pole has aservice window at bottom comprising four way 25 amp connector terminal and a mcb.The pole has mild stel base plate having four nos. mounting holes and can be mounted four nos. anchor bolts. having nominal bore dia. 100 mm and dia. 4.85 mm thickness, planting depth 120 cm with pit depth 135 cm including fixing up to a given depth below G/L.The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, complete in all respects as required:- Twinkle/Mayfair/Valmont/Transrail/Ventura |
| 22 | The Engineer-in-charge or officer authorized by him may inspect the material at manufacturer's facility in India before dispatch. The transport expenses and cost related to testing of the departmental inspectors shall be deemed to be included in the quoted amount of bidder and nothing extra shall be payable on this account. Please Enable Macros to View BoQ information |
