|
| 1 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) |
| 2 | 18 mm thick |
| 3 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 4 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 5 | 250x10 mm |
| 6 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 7 | 100 mm |
| 8 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 9 | Twin rubber stopper |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 11 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 12 | Two coats |
| 13 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 14 | For fixed portion |
| 15 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 16 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 17 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 18 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 19 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 20 | Providing & fixing Curdlee® polyurethane coated homogeneous vinyl sheet flooring by Armstrong World Industries, complying with ISO 10581 / EN 649. Flooring shall be homogeneous PVC construction with TRUESHIELD XP surface coating, 2.0 mm thick, supplied in 2.0 m wide rolls (15/20 m length). Wear resistance Group T (EN 660-2), chemical resistance Grade 0 – No Stain (ISO 26987), color fastness ≥ 6, and static electrical charge ≤ 2.0 kV. Dimensional stability ≤ 0.4% in both directions. TVOC < 10 μg/m3, DOP non-detectable, EN 71-3 compliant. Classification EN 685: Class 23 / 34 / 43 (Heavy to Very Heavy Duty). Including approved adhesive, surface preparation, cutting, fitting, and heat welding of joints complete as per direction of Engineer-in-Charge / institute. |
| 21 | Providing & fixing of 80mm thick PUF insulated Wall Panel with 0.50mm thick PPGI sheet with micro ribs (Make-JSW) (RAL-9002) both sides with FR Garde PUF Density 44±10% Kg/m3 in metalic tongue and Groove joint system, cut to size, with no loading of wastage with additional 90º bends in Male & Female groove to have proper sealing, Strength & Air Tight joints Panel to Panel,CFC free & Ozone friendly with hardware, silicone, sealant, etc., the colour and design shall be approved by the Engineer-in-Charge / institute. |
| 22 | Providing & fixing of 50mm thick PUF insulated roof/ Wall Panel with 0.50mm thick PPGI sheet with micro ribs (Make-JSW) (RAL-9002) both sides with FR Garde PUF Density 44±10% Kg/m3 in metalic tongue and Groove joint system, cut to size, with no loading of wastage with additional 90º bends in Male & Female groove to have proper sealing, Strength & Air Tight joints Panel to Panel,CFC free & Ozone friendly With hardware, silicone, sealant, etc., the colour and design shall be approved by the Engineer-in-Charge / institute. |
| 23 | Providing & fixing of doors size 1.0x2.1 (single leaf ) shall be of 44mm leaf thickness, 0.80mm GP/SP powder coated metal sheets on both sides (60-80 microns) filled with PUF Density 42 Kg/m3 , honeycomb (as required). The door fitted with 1.2mm GPSP Powder coated Chowkhat. Include hardware, silicone, sealant, etc. The following accessories of APAR make will be provided with doors. The colour and design shall be approved by the Engineer-in-Charge /institute.SS Ball bearing HingesHydroulic Door closer std armSS Dead Lock with both sides key operationsSS 'D' Type Handles and one side push plate (S.S.)Automatic door drop sealDouble Glazed View Glass of size 400x600mm with SS ChannelsSS Kick plates upto 300mm height on push sideDoor Caps |
| 24 | Providing & fixing of doors size 1.2x2.1 (double leaf) shall be of 44mm leaf thickness, 0.80mm GP/SP powder coated metal sheets on both sides (60-80 microns) filled with PUF Density 42 Kg/m3 , honeycomb ( as required). Include hardware, silicone, sealant, etc. The door fitted with 1.2mm GPSP Powder coated Chowkhat. Include hardware, silicone, sealant, etc. The following accessories of APAR / equivalent make will be provided with doors. , the colour and design shall be approved by the Engineer-in-Charge/ institute.SS Ball bearing HingesHydroulic Door closer std armSS Dead Lock with both sides key operationsSS 'D' Type Handles and one side push plate (S.S.)Automatic door drop sealDouble Glazed View Glass of size 400x600mm with SS ChannelsSS Kick plates upto 300mm height on push sideDoor Caps |
| 25 | Providing & fixing of PPGI Top/Bottom C - channels of size 30x82x30 X.5 MM mm as per site requirment for Flashings including accessiores etc as per direction of engineer incharge. |
| 26 | Providing & fixing of PPGI inner corner of size 40x40X .5MM mm as per site requirment for including Accessories as per direction of engineer incharge. |
| 27 | Providing & fixing of PPGI outer corner of size 100x70X .5MM mm as per site requirment and including Accessories as per direction of engineer incharge. |
| 28 | Providing & fixing of Powder coated aluminium hanging truss for ceiling with complete hanging arrangments and tie rod as per site requirement as per direction of Engineer incharge. |
| 29 | Providing & fixing of Powder coated GI Ceiling Angle for ceiling with complete hanging arrangments and including Accessories as per direction of engineer incharge. |
| 30 | Making Cutouts in the wall and roof in the puf panel as required at site complete and including accessories as per direction of engineer incharge. Please Enable Macros to View BoQ information |
