Housing Urban and Rular Development Government Departments Closing in 0 days TDR #55255012

Tender For Construction Of Demonstration Housing Project On Design & Build Basis At Ratanpur, Chhattisgarh Under Pmay-U 2.0

Issued by Government Departments · Bilaspur, Chhattisgarh
Tender Value
8.65 Crore
Estimated cost
Bid Submission
26 May 2026
0 days left
EMD
17.30 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bilaspur → Chhattisgarh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Demonstration Housing Project On Design & Build Basis At Ratanpur, Chhattisgarh Under Pmay-U 2.0

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 19-May-2026 Extension of last date Date 26-May-2026

BOQ

Name of Work:- Construction of Demonstration Housing Project on Design & Build basis at Ratanpur, Chhattisgarh under PMAY-U 2.0
Sl. No. Item Description
1HEAD A - DWELLING UNITS & OTHER PROVISIONS
2Total cost of construction of Buildings (Dwelling Units + Community Centre) including all associate facilities & services, fire-fighting, handicap ramp & staircase with stainless steel railing of grade 304, mumty, plinth protection and other provisions complete in all respect as per scope of work with specifications and drawings mentioned in Bid document & including GST, Labour Cess, other Taxes and complete maintenance for 5 years.
3HEAD B - ONSITE INFRASTRUCTURE WORKS (on Item Rate Basis)
4SUB-HEAD 1
5EARTH FILLING
6Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
7Extra for lead beyond 5 km upto 15Km
8Rolling with power roller of minimum 8 tonnes for banking excavated earth in layers not exceeding 20 cm in depth
9Watering the excavated earth for banking
10Extra for Dewatering work (rate only)
11SUB-HEAD 2
12ROAD AND PAVEMENT
13Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. (Road and Pavement)
14Earth work in surface excavation not exceeding 30 cm in depth butexceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge. (All kinds of soil)
15Disposal of surplus excavated earth within a lead of 5 km beyond the initial lead of 50m as directed by Competent authority
16Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level.(100 mm thickness)
171:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
18Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Competent authority. (100 mm thickness) (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately).
19Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres.
20with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 (both sides)
21Interlocking Paver
22Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of BMTPC or Site Engineer.
23SUB-HEAD 3
24BOUNDARY WALL WITH ENTRANCE GATE
25Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
26All kinds of soil. For column footing for counterfort retaining walls
27Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level.(100 mm thickness)
281:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
29Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
301:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). (Colum)
31Centering and shuttering including strutting, propping etc. and removal of form for :
32Columns, Pillars, Piers, Abutments, Posts and Struts
33Lintels, beams, plinth beams, girders, bressumers and cantilevers
34Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc
35Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above
36Thermo-Mechanically Treated bars of grade Fe-500D or more (@125cum)
37Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of BMTPC. (The payment of RCC band and reinforcement shall be made for separately). (RATE ONLY)
3812 mm cement plaster of mix :
391:6 (1 cement: 6 coarse sand)
40Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
41New work (Two or more coats applied @ 1.43 litre/ 10sqm. Over and including priming coat of exterior primerapplied @ 0.90 litre/10 sqm
42Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
43Entrance Gate
44Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.
45With G.I. barbed wire
46Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete
47Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
48Two or more coats on new work over an under coat of ordinary paint
49BOUNDARY WALL WITH PROPOSED TECHNOLOGY
50Providing & installation of 2.1 meter high boundary wall of technology proposed for building work over plinth beam with fixing fencing over it consisting of angle iron posts with 9 rows of G.I barbed wire including coping, finishing etc. all complete as per approved drawing and direction of BMTPC (RATE ONLY).
51SUB-HEAD 4
52EXTERNAL WATER SUPPLY
53Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer of BMTPC.
5425 mm nominal outer dia pipes
5540 mm nominal outer dia pipes
5650 mm nominal outer dia pipes
57Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
5840 mm nominal bore.
5950 mm nominal bore.
60SUB-HEAD 5
61SEWERAGE
62Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
63Depth upto 1.5 m
64Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
65Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
66With common burnt clay F.P.S. (non-modular)bricks of class designation 7.5
67Extra for depth for manholes :
68Size 90x80 cm
69With common burnt clay F.P.S. (non- modular) bricks of class designation 7.5
70Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m
71All kinds of soil
72Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
73Man holes
74Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2 fine sand) including testing of jointsetc. complete (uPVC may also be used of same dia) :
75150 mm dia
76Disposal of surplus excavated earth within a lead of 5 km beyond the initial lead of 50m as directed by Competent authority
77Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
78150 mm diameter
79SUB-HEAD 6
80DRAINAGE AND DISPOSAL
81Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
82In all kinds of soil.
83Depth upto 1.5 m
8412 mm cement plaster finished with a floating coat of neat cement of mix :
851:4 (1 cement: 4 fine sand)
86Brick work with common burnt clay F.P.S. (non- modular) bricks of class designation 7.5 in foundation and plinth in:
87Cement mortar 1:6 (1 cement : 6 coarse sand)
88Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level.(100 mm thickness)
891:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
90Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos. longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.
91SUB-HEAD 7
92UNDER GROUND WATER TANK
93Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Depth upto 1.5 m
94All kinds of soil
95Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :
961:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
97Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
981:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
99Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
100Thermo-Mechanically Treated bars of grade Fe-500D or more(@125/cum
101Centering and shuttering including strutting, propping etc. and removal of form for :
102Foundation, base of walls, columns etc.
103Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
104Suspended floors, roofs, landings, balconies and access platform
10512 mm cement plaster of mix :
1061:6 (1 cement: 6 fine sand)
10712 mm cement plaster finished with a floating coat of neat cement of mix :
1081:4 (1 cement: 4 fine sand)
109Steel work welded in built up sections/ framed work, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
110Supply & Installation of Mono Block Pump with starter of approved brand complete (2HP)
111SUB-HEAD 8
112RAIN WATER HARVESTING
113Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction upto 90 metre depth below ground level. All types of soil
114300 mm dia
115Supplying, assembling, lowering and fixing in vertical position in borewell, un-plasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, asper direction
116150 mm nominal size dia
117Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction
118RWH Pit (5x1.8x1.8 inside size)
119Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction
120RWH Pit (5x1.8x1.8 inside size)
121Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction
122RWH Pit (5x1.8x1.8 inside size)
123Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading& sizes as per actual requirement, all complete as per direction
124Providing and fixing factory made precast RCC perforated drain covers,having concrete of strength not less than M-25, of size 1000 x 450x50mm, reinforced with 8 mm dia four nos longitudinal & 9 nos crosssectional T.M.T. hoop bars, including providing 50 mm dia perforations@ 100 to 125 mm c/c, including providing edge binding with M.S.flats of size 50 mm x 1.6 mm complete, all as per direction
125Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by BMTPC or Site Engineer. All kinds of soil
126Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
127Brick masonry in foundation with brick of class des.75 in CM 1:6
128Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.
12920 mm cement plaster
130Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level.
1311:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
132Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks
133Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
134Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m
135All kinds of soil
136Providing and fixing on wall face un-plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
137110 mm diameter
138Providing and fixing on wall face un-plasticised - PVC moulded fittings/ accessories for un-plasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion
139Bend 87.5°
140150 mm diameter
141SUB-HEAD 9
142HORTILCULTURE
143Supplying and stacking at site dump manure from approved source including all lead and lifts (manure measured in stacks will be reduced by 8% for payment) - screened through sieve of IS designation 20 mm.
144Supplying & stacking sludge at site including royalty & carriage will all leads & lifts (sludge manure measured in stacks will be reduced by 8 % for payment)
145Spreading of sludge / damp manure of / and good earth in required thickness (cost of sludge/ damp manure or / land good earth to paid separately)
146Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth.
147Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
148Supplying & Stacking of Selection No.1 doob grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc. and as per direction of officer in charge.
149Supply and Planting of Croton Golden plant, having ht. 45 cm to 60 cm with 2 to 3 branches, well developed, fresh and healthy foliage in 25 cm size of Earthen pot / Plastic pot as per direction of the officer-in-charge. ( As per local conditions suitability)
150Plants
151SUB-HEAD 10
152EXTERNAL ELECTRIFICATION
153P/Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, 2ndclass bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.
15435.0 Sq.mm
1553.5 core
15635.0 Sq.mm up to 95 Sq.mm
1572 core
158Supplying and making one end termination with heavy duty single compression brass gland SIBG type, aluminium lugs duly crimped with crimping tool, PVC tape etc. for following size of Armoured PVC insulated & PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required of size.
1593.5 x 35.0 sq.mm
1602 x 6.0 sq.mm
161Supply and fixing of floor mounting, totally enclosed, compartmentalized, cubical, dust, vermin proof and outdoor type. Feeder pillar fabricated out of 2 mm thick cold rolled carbon annealed, sheet steel, internally strengthened with angle iron frame work with following incoming and outgoing feeders (fabricated out of 2 mm CRCA Sheet steel) including making connection / inter-connections with lugs / glands crimping tools, testing and commissioning of following items inside the panel:
162Incommer
1631 No. 200 Amp. 4 poles MCCB (25 Ka) with ON/OFF indications metre
164Indication
165Three (3) Nos. phase indicating (R.Y and B) lamps with protection 2A SP MCB's for protection having lens and lamp.
166Outgoing
167One (1) NO. 160 Amp. 4 pole MCCB (16 KA) with ON/OFF indications in the infront 15 nos. 32 A D.P. MCB (10 KA)
168Control
1694 Pole Contractor with a thermal rating of 32 - 1 no.
170Time Switch with Daily dial, suitable for operation on 230 Volt, Single phase, 50 Hz, AC supply - 1 No.
171Auto - Manual Selector switch - 1 No.
172On / Off Push Buttons - 4 Nos.
173Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
174Supply, installation and commissioning of SPV Solar Street Light (white LED Based) System as per specifications including supplying of 75 mm dia (nominal) (Medium class), 5.5 metre length (including accessories) complete with base plate and nipple including two coats of black bituminous paint upto 1 mtr. From bottom and two coats of aluminium paint above ground level etc. complete as required. Detail of pole: Planting depth - 1 Mtr and Height above ground level - 4.5 Mtr. over concrete pedestal, 15 Watt LED light Phillips/ Bajaj/ Crompton or Suitable Equivalent.
175Supply, installation and commissioning of Solar Panel with 500 Watt for 48 number lighting points in common areas (corridor & Staircase) at suitable locations including LED bulbs with 10 Watt
176Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths below natural ground / Road top level.
177In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.
178Depth upto 1.5 m
179Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :
1801:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size).
181Centering and shuttering including strutting, propping etc. and removal of form for : Foundation etc.
182Supplying, installing on wall, testing and commissioning of following capacity made of 1.6 mm thick sheet steel enclosure duly painted with powder coating, wall straps bus bar 100 amp. of size 400 x 300 mm
183Supplying, installation, testing & commissioning of 200 KVA transformer including service connection and all basic infrastructure to make the transformer functional of approved brand & make by BMTPC complete in all respect.
184SUB-HEAD 11
185TUBE WELL
186Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level
187All types of soil
188300 mm dia
189Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction
190100 mm nominal size dia
191Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction
192Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc.,all as per requirement and direction of Engineer-in-charge.
193Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
194100 mm dia
195Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tube-well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
196100 mm dia
197Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
198100 mm dia
199Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
20025mm pipe
201Submersible Pump-15HP
202Starter
203Electrical Flat Cable
204SUB-HEAD 12
205SEPTIC TANK
206Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
207Depth upto 1.5 m
208Extra for additional depth of 1.5 m or part thereof in: All kind of soil
209Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.
2101:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
211Brick work with common burnt clay F.P.S. (non- modular) bricks of class designation 7.5 in foundation and plinth in:
212Cement mortar 1:6 (1 cement : 6 coarse sand)
213Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :
2141:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size21)
215Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
2161:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
217Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above
218Thermo-Mechanically Treated bars of grade Fe-500D or more
219Centering and shuttering including strutting, propping etc. and removal of form for :
220Suspended floors, roofs, landings, balconies and access platform
221Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundations and plinth in :
222cement mortar 1:4 (1 cement : 4 coarse sand) sqm
22312 mm cement plaster finished with a floating coat of neat cement of mix :
2241:4 (1 cement: 4 fine sand)
225Steel work welded in built up sections/ framed work, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
226Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 55255012
AUTHORITY Government Departments
TENDER VALUE 8.65 Crore
LAST DATE 26-05-2026
Authority
Authority Name Building Materials And Technology Promotion Council
Work Description Tender for Construction Of Demonstration Housing Project On Design & Build Basis At Ratanpur, Chhattisgarh Under Pmay-U 2.0
Basic Detail
Tender No BMT/S/2026/DHP-Chhattisgarh
Bidding Type Tender
Location
City Bilaspur
State Chhattisgarh
Key Dates
Publish Date 19 May 2026
Submission Date 26 May 2026
Open Date 28 May 2026
Finance
Tender Value 8.65 Crore
Tender Fee 5900
EMD 17.30 Lakhs
Exemption Available
Document List
92f9ccf0-9cf4-414b-b2e4-045c2bb09ef7.html
BOQ_952986.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
May 26, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
May 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

92f9ccf0-9cf4-414b-b2e4-045c2bb09ef7.html

xls

BOQ_952986.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders