|
| 1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 3 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood |
| 4 | Providing and fixing 12 m thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangemnet and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in Charge (Door handle, lock and stopper etrc. to be paid separately) |
| 5 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. |
| 6 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete |
| 7 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 8 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50 mm (base and height) |
| 9 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 10 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm |
| 11 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 12 | 200x10 mm |
| 13 | 150x10 mm |
| 14 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 15 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 16 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters |
| 17 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood |
| 18 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door wei t upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With brass cover plate minimum 1.25 mm thickness |
| 19 | PU polishing of assian or equivalent make and manufacture of required colour two or more coats on new work with sealer as per manufacture specification. |
| 20 | Providing and fixing stainelss steel piano hinges of apprved quality as per direction of Engineer-in-charge |
| 21 | P/F 18\\" drawer channel etc complete as per direction of Engineer-in-charge. |
| 22 | P/ F 19 mm thick commercial board (duro/ centuary make ) i/c priming and painting/ wooden beading with polish around etc. complete. |
| 23 | P/F 1 mm thick sunmica (meriono/ sundex/ centuray make) or equivalent and design on existing wood work with necessary nails, fevicol etc i/c denailing after the sunmica is pasted all complete. |
| 24 | P/F 4 mm thick veneer / teak ply with necessary screws,nails, adhesive etc complete |
| 25 | P/F 6 mm thick commercial ply wit necessary screws, nails and adhesive etc. all complete as per direction of Engineer-in-charge |
| 26 | Providing and fixing Multipurpose lock (Godrej make) for cupboards etc complete |
| 27 | Making of centre teak wood table of size 39\\"x 21\\" x19\\" (the top toughened glass to be paid seperately) as per direction of Engineer-in Charge. |
| 28 | P/ F 12 mm thick ply wood (Centuary / Duro or equiavlent make) etc complete. As per direction of Engineer in charge |
| 29 | P/F aluminium extruded section body tublar type universal hydraulic door closer (Hardwin make) with necessary acceossories and screws etc complete. Please Enable Macros to View BoQ information |
