|
| 1 | CHAIR DINING (FD-279) |
| 2 | M&L for removal of old existing unserviceable back leg of chair in any position, S&F new back leg made out of 1st class hard wood (teak) with nails of appropriate size. Rest all as shown on drg and as directed by the Engineer-in-Charge. |
| 3 | All as per item No 1.01 above but front leg |
| 4 | All as per item No 1.01 above but side rail |
| 5 | All as per item No 1.01 above but front/ back rail |
| 6 | All as per item No 1.01 above but stiffner |
| 7 | All as per item No 1.01 above but back strip |
| 8 | S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg. Rest all as shown on drg and as directed by Engr-in-charge. |
| 9 | Recanning of chair dining with 2mm wide plastic cane in Godrej pattern all as shown on drawing.(Make of cane shall be Ajay/Binny/ Shah/ Premier) |
| 10 | CHAIR DINING JCO/ORS (FD/MAP-II/05) |
| 11 | M&L for removal of old existing unserviceable PVC seat of chair, S&F new PVC seat 4mm thick and 1 Nos of additional stiffner at bottom of seat with holes screwed with rails all as specified in drg and as directed by the Engineer-in-Charge. |
| 12 | M & L for replacement of back leg made of 1st class hard wood (teak) with nails of appropriate size. Rest all as shown on drg and as directed by the Engineer-in-Charge. |
| 13 | All as per item No 2 .02 above but front leg |
| 14 | All as per item No 2.02 above but side rail |
| 15 | All as per item No 2.02 above but front/ back rail |
| 16 | All as per item No 2.02 above but stiffener |
| 17 | All as per item No 2.02 above but wooden back strip |
| 18 | S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 19 | CHAIR WOODEN BOTTOM W/O ARMS (FD-285) |
| 20 | M&L for removal of old existing unserviceable plywood seat as existing of chair in any position, S&F new BWR grade 6mm plywood seat of appropriate size as per drawing and as directed by the Engineer-in-Charge. |
| 21 | M & L for replacement of back leg made of 1st class hard wood (teak) |
| 22 | All as per item No 3.02 above but front leg |
| 23 | All as per item No 3.02 above but side rail |
| 24 | All as per item No 3.02 above but front/ back rail |
| 25 | All as per item No 3.02 above but wooden back strip |
| 26 | All as per item No 3.02 above but stiffener |
| 27 | S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 28 | CHAIR WRITING (FD-280) |
| 29 | M&L for removal of old existing unserviceable back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak) all as shown on drg, specified and as directed by the Engineer-in-Charge. |
| 30 | All as per item No 4.01 above but front leg |
| 31 | All as per item No 4.01 above but side rail |
| 32 | All as per item No 4.01 above but front or back rail |
| 33 | All as per item No 4.01 above but back strip |
| 34 | All as per item No 4.01 above but arm rest |
| 35 | All as per item No 4.01 above but stiffner |
| 36 | S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 37 | Recanning of chair writing with 2mm wide plastic cane in Godrej pattern all as shown on drawing.(Make of cane shall be Ajay/Binny/ Shah/ Premier) |
| 38 | CHAIR EASY (FD-229) |
| 39 | M&L for removal of old existing unserviceable back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak) all as shown on drg, specified and as directed by the Engineer-in-Charge. |
| 40 | All as per item No 5.01 above but front leg |
| 41 | All as per item No 5.01 above but side rail of seat frame |
| 42 | All as per item No 5.01 above but front or back rail of seat frame |
| 43 | All as per item No 5.01 above but side rail of back frame |
| 44 | All as per item No 5.01 above but top or bottom rail of back frame |
| 45 | All as per item No 5.01 above but replacement of arm rest |
| 46 | S & F new hard PVC/ rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 47 | Recanning of chair Easy with 2mm wide plastic cane in Godrej pattern all as shown on drawing.(Make of cane shall be Ajay/Binny/ Shah/ Premier) |
| 48 | SOFA SET 04/05 SEATER WITH CUSHION (FD-281) |
| 49 | M & L for removing old unserviceable front leg and S&F of new front leg as per existing shape and size. |
| 50 | All as per item No 6.01 above but Rear Legs. |
| 51 | All as per item No 6.01 above but Side Rails. |
| 52 | All as per item No 6.01 above but Front Rails for Large three seater. |
| 53 | All as per item No 6.01 above but Back Rails for Large three seater . |
| 54 | All as per item No 6.01 above but Front Rails for Single seater. |
| 55 | All as per item No 6.01 above but Back Rail for Single Seater. |
| 56 | All as per item No 6.01 above but Arm Rests. |
| 57 | All as per item No 6.01 above but Wooden Bearers for Large three seater. |
| 58 | All as per item No 6.01 above but Wooden Bearers for Single seater |
| 59 | All as per item No 6.01 above but Teak Wood Batten for Seat and Back |
| 60 | Supply of Cushion of size 21'x22'x4' Foam 32 Density 100mm thick (Make : Sleepwell/Curl-on Goldline/Featherfoam with Cushion cover of superior quality duly Stiched as per direction of Engr-in-charge/GE . Quality of tapestry Cloth shall be as per sample kept at GE office . Colour of tapestry cloth shall be approved by Engr-in-Charge/Garrison Engineer. |
| 61 | PEG TABLE (FD-384) |
| 62 | Removing of old existing unserviceable top from peg table and S&F new top made out of 17/18mm thick exterior grade pre laminated MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood). |
| 63 | Replacement of old existing unserviceable leg from existing peg table and S&F the same size new leg made out of Ist class hard wood (Teak) to Peg table duly french polished all as shown on drawing and as directed by Engineer-in-Charge. |
| 64 | All as per item No 7.02 above but long top rail. |
| 65 | All as per item No 7.02 above but short/ bottom rail. |
| 66 | All as per item No 7.02 above but stiffener of Peg table. |
| 67 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 68 | TEAPOY (FD-382) |
| 69 | M&L for removal of old existing unserviceable top of table in any position, S&F new top made out of 17/18mm thick exterior grade MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood). |
| 70 | All as per item No 8.01 above but leg made of 1st class hard wood(teak) |
| 71 | All as per item No 8.01 above but long rail |
| 72 | All as per item No 8.01 above but short rail |
| 73 | All as per item No 8.01 above but stiffner |
| 74 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 75 | TABLE DINING (JCOs/ORs) 1200 X 900 MM (FD-273, FD/MAP-II/03 |
| 76 | M&L for removal of old existing unserviceable top of table in any position, S&F new top made out of 17/18mm thick exterior grade MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood) for Table dining 4 persons. |
| 77 | All as per item No 9.01 above but S&F new leg made of 1st class hard wood |
| 78 | All as per item No 9.02 above but long rail |
| 79 | All as per item No 9.02 above but short rail |
| 80 | All as per item No 9.02 above but support stiffner |
| 81 | S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge |
| 82 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 83 | TABLE 900 x 600 mm without drawer (FD-284) |
| 84 | M&L for removal of old existing unserviceable top of table in any position, S&F new top made out of 17/18mm thick exterior grade pre laminated MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood). |
| 85 | All as per item No 10.01 above but leg made out of 1st class hard wood |
| 86 | All as per item No 10.02 above but long rail |
| 87 | All as per item No 10.02 above but short rail |
| 88 | All as per item No 10.02 above but bottom centre stiffener |
| 89 | All as per item No 10.02 above but bottom side stiffner |
| 90 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 91 | TABLE 900 x 600 mm with drawer (FD-283) |
| 92 | M&L for removal of old existing unserviceable top of table in any position, S&F new top made out of 17/18mm thick exterior grade MDF board (ISI marked) all as per drg and as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood). |
| 93 | All as per item No 11.01 above but leg made out of 1st class hard wood |
| 94 | All as per item No 11.02 above but long rail |
| 95 | All as per item No 11.01 above but short rail |
| 96 | All as per item No 11.01 above but drawer with fittings |
| 97 | All as per item No 11.01 above but bottom centre stiffener |
| 98 | All as per item No 11.01 above but bottom side stiffner |
| 99 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 100 | Bed Hard (FD-246) |
| 101 | Removing old existing unserviceable Plytop from Bed Hard and S&F of new 12mm thick plytop of siutable size, ISI marked, BWR Grade commercial plywood of unpolished edging of approved quality all as shown on drawing and as directed. (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold)). |
| 102 | Removing old existing unserviceable long rails of bed hard and S&F new long rails as per existing shape and size. |
| 103 | Removing old existing unserviceable short rails of bed hard and S&F new short rails as per existing shape and size |
| 104 | Removing old existing unserviceable head wing board of bed hard and S&F new Head Wing Board as per existing shape and size |
| 105 | Removing old existing unserviceable foot wing board of bed hard and S&F new Foot Wing Board as per existing shape and size |
| 106 | Removing old existing unserviceable leg of bed hard and S&F new leg as per Existing Shape and Size |
| 107 | Removing old existing unserviceable stiffner of bed hard and S&F new Stiffner as per existing shape and size |
| 108 | Removing old existing unserviceable teak face ply of head wing board and S&F new Teak Face Ply of Size 04mm Of Head Wing Board. |
| 109 | Removing old existing unserviceable teak face ply of foot wing board and S&F new Teak Face Ply of Size 04mm Of foot Wing Board. |
| 110 | Table DINING 6 PERSON (1500x900x760MM)FD -273/ FD /MAP-II/03 |
| 111 | M&L for removal of old existing unserviceable top of table in any position, S&F new top made out of 17/18mm thick exterior grade MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood) for Table dining 4 persons. |
| 112 | All as 9.01 above but S&F new leg made of 1st class hard wood |
| 113 | All as 9.02 above but long rail |
| 114 | All as 9.02 above but short rail |
| 115 | All as 9.02 above but support stiffner |
| 116 | S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge |
| 117 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 118 | TABLE CENTRE (FD-274) |
| 119 | Removing of old existing unserviceable top from table centre and S&F new top made out of 17/18mm thick exterior grade pre laminated MDF board all as per drg and as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood). |
| 120 | Replacement of old existing unserviceable leg from existing table centre and S&F the same size new leg made out of Ist class hard wood teak duly french polished all as shown on drawing and as directed by Engineer-in-Charge. |
| 121 | All as per item No 14.02 above but long rail. |
| 122 | All as per item No 14.02 above but short rail. |
| 123 | All as per item No 14.02 above but stiffener of table centre. |
| 124 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 125 | TABLE WRITING FD-275 |
| 126 | Removing old unserviceable top of table writing and supply & fixing new top made out of 17/18mm thick pre-laminated MDF board exterior grade phenol formaldehyde one side teak veneered with 4mm teakwood beading all around the top complete all as directed & shown on drawing. |
| 127 | Taking out old unserviceable sides of table writing and supply & fixing new sides made out of 19mm pre-laminated MDF board one side teak veneered complete all as directed & shown on drawing. |
| 128 | Removing of old unserviceable shutters of table writing and supply & fixing new shutter made out of 19mm thick pre-laminated MDF board one side teak veneered bonded with phenol formaldehyde exterior grade including fixing of new or old serviceable hinges 50mm MS medium weight complete all as directed & shown on drawing. |
| 129 | Taking out old unserviceable drawers from table writing and supply & fixing with new drawers made out of pre-laminated MDF board & 1st class well seasoned teakwood for sides & 6mm thick commercial plywood for bottom of drawers complete all as directed & shown on drawing. |
| 130 | Removing of unserviceable mild steel hinges from shutters and supply & fixing mild steel butt hinges 50mm medium weight cold rolled complete all as directed & shown on drawing. |
| 131 | Removing of unserviceable knobs from shutters & drawers of table writing and supply & fixing new 35mm round brass knob of approved quality complete all as directed & shown on drawing. |
| 132 | Taking out old unserviceable plywood back of table writing and supply & fixing new 6mm thick 5 ply plywood commercial BWR gde type BB fixed with 20mm mild steel screws complete all as directed & shown on drawing. |
| 133 | Taking out old unserviceable long rail of table writing and supply & fixing new long leg made out of 1st class teak wood well seasoned complete all as directed & shown on drawing. |
| 134 | Taking out old unserviceable short rails of table writing and supply & fixing new short legs of table writing complete all as directed & shown on drawing. |
| 135 | Taking out old unserviceable long stiffener of table writing and supply & fixing new long stiffener of table writing complete all as directed & shown on drawing. |
| 136 | Taking out old unserviceable short stiffeners of table writing and supply & fixing new short stiffeners of table writing complete all as directed & shown on drawing. |
| 137 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 138 | SIDE BOARD- FD-241 |
| 139 | Removing of old unserviceable top from side board and supply & fixing new top made out of 17/18mm thick Pre-laminated MDF board exterior grade phenol formaldehyde one side teak veneered & other side having balancing white lamination complete all as specified and shown on drawing & directed by Engr-in-Charge. |
| 140 | Taking down old unserviceable shutters from side board and supply & fixing new shutters made out of 17/18mm thick pre-laminated MDF board exterior gde one side teak veneered & other side having balancing white lamination including fixing of teakwood beading all around the with 19x6mm fixed with MS hinges 75mm long complete all as directed & shown on drawing. |
| 141 | Taking out old unserviceable plywood back from side board and supply & fixing new plywood back of 6mm thick commercial gde of approved quality complete all as directed & shown on drawing. |
| 142 | Taking out old unserviceable drawers from side board and supply & fixing new drawers made out from 6mm thick plywood commercial gde & 12mm thick teakwood plank as approved complete all as directed & shown on drawing. |
| 143 | Taking out old unserviceable legs from side board and supply & fixing new legs made out of well seasoned teakwood complete all as directed & shown on drawing. |
| 144 | Removing of old unserviceable sides of side board and supply & fixing new side made out of pre-laminated particle board one side teakwood finish as approved quality complete all as specified & shown on drawing. |
| 145 | Supply & fixing of 35mm round brass knob to the shutters & drawer of side board complete all as specified & shown on drawing. |
| 146 | Removing of old unserviceable locks from the shutters of side board and supply & fixing new locks brass body 4 levers 40mm with duplicate keys complete all as directed & shown on drawing. |
| 147 | Supply and fix only 75 mm butt hinges brass medium weight of approved quality complete all as directed & shown on drawing. |
| 148 | TABLE DRESSING LADIES WITH MIRRORFD/MAP-II/07 |
| 149 | Removing of old broken damaged top of table dressing ladies and supply & fixing new top of table dressing gents made out of 17/18mm thick pre-laminated MDF board complete all as directed and shown on drawing. |
| 150 | Removing of old broken damaged sides of table dressing ladies and supply & fixing new sides made out of 17/18mm thick pre laminated MDF board one side teak veneered all as specified & directed. |
| 151 | Removing of broken damaged handles of table dressing ladies and supply & fixing new chromium plated handles of approved quality & size complete all as directed and shown on drawing. |
| 152 | Removing of damaged mirror of table dressing ladies with frame and back support and supply & fixing new mirror 5mm thick (Make : Swastik/Gold fish/ Saint Gobain/ Modi guard) with frame & backply and back support as appropriate size as per drawing. |
| 153 | Removing of broken/damaged drawer of table dressing ladies and supply & fixing new drawers made out of well seasoned teak /shishum wood including all components complete all as directed and shown on drawing. |
| 154 | Removing of cushion for stool dessing of table dressing ladies and supply & fixing new cushion as appropriate size 75 mm thick 40 density (Make : Curl on Goldline/Sleepwell) complete all as directed and shown on drawing. |
| 155 | Removing of wheeels for stool dessing of table dressing ladies and supply & fixing new wheels as appropriate size complete all as directed and shown on drawing. |
| 156 | POLISHING OF WOODEN FURNITURE |
| 157 | Material and labour for removing/scrubbing of all old polished surfaces by using grinding machine & sand paper/ emary paper etc, including filling of cavities by putty/filler/sealer, preparation of old wooden surfaces by applying seina/burnt seina in uniformally and and applying two coats of french/Lacquere polish using spray machine to obtain glossy finish to the following wooden furniture items complete all as specified and as directed by Engg-in-Charge. |
| 158 | Chair Dining. FD - 279 |
| 159 | Chair Dining JCO/Ors. FD/MAP-II/05 |
| 160 | Chair wooden bottom w/o arms. FD-285 |
| 161 | Chair Writing. FD - 280 |
| 162 | Chair Easy. FD-229 |
| 163 | Sofa Set 04 seater . FD-281 |
| 164 | Sofa Set 05 seater . FD-281 |
| 165 | Peg Table. FD- 384 |
| 166 | Teapoy . FD– 382 |
| 167 | Table Dining 1200x900mm. FD/MAP-II/03 |
| 168 | Table 900x600mm without Drawer. FD -284 |
| 169 | Table 900x600mm with Drawer. FD -283 |
| 170 | Table Dressing Ladies with mirror. FD-251 FD/MAP-II/07 |
| 171 | Bed Hard. FD-246 |
| 172 | Table Writitng. FD-275 |
| 173 | Table Centre. FD-274 |
| 174 | Table Dining 6 Person (1500x900x760mm). FD -273/ FD /MAP-11/02 |
| 175 | Table Dining 8 Person (1800x900x760mm)FD -273/ FD /MAP-11/02 Please Enable Macros to View BoQ information |