|
| 1 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 2 | Solid PVC board 20-22mm thick, colour white, interior grade pre laminatd one side, fixed with screws as in shutters of cupboard shutters, the PVC board shall be wrap free , impact resistant, fire resistant and smell free complete, all as specified and directed. |
| 3 | 100mm hasp and staple,aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 4 | PVC body magnetic shutter catcher for kitchen cup boards cabinets etc, complete all as specified and directed. |
| 5 | Continuous (piano) hinges, mild steel bright finish, width of flap when open 30mm, complete all as specified and directed. |
| 6 | 100mm size aluminium handle (ISI Marked), fabricated D type, anodised, complete all as specified & directed by Engineer-in-charge. |
| 7 | 100mm aluminum anodized barrel tower bolts (ISI Marked) of extruded section, fixed as in repair complete all as specified and directed. |
| 8 | Taking down chowkhats or frame not exc. 1.5 Sqm with shutters, without taking off shutters from the frame, complete all as specified and directed. |
| 9 | Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame, complete all as specified and directed. |
| 10 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviveable tiles to store and rubbish off the premises complete all as specified and directed |
| 11 | 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 12 | Glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 13 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 14 | Vitrified ceramic tiles, light shade. 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 15 | All as per serial item No 14 herein before but on vertical surfaces as skirting and dado over 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 16 | Demolition of brick masonry built in cement mortar including all quoins arches, pillars complete all as specified & directed |
| 17 | Brick work with sub class ‘B’ bricks, old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6, complete all as specified & directed. |
| 18 | Cement concrete type B-0, 1:2:4 using (12.5 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed. (Cement concrete item shall be reinforced, where ordered. Reinforcement shall be measured and paid separately). |
| 19 | Demolition of cement concrete (unreinforced) any description and in any position (below or above ground level), not otherwise specifically provide complete all as specified. |
| 20 | Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. |
| 21 | 15mm thick rendering in Cement and Sand mortar 1:6 over concrete /brick surfaces finished even and smooth without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed. |
| 22 | 5mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces) finished even and smooth without using extra cement, complete all as specified and directed. |
| 23 | Distempering with 1st quality water based premium acrylic interior emulsion paint with unique chemical composition of finest quality, durable, water repellent, bacteria resistant, thermally insulating, elastomeric and it should protects wall from the damaging effect. In addition to its polymer composition it should prevent dust setlling on wall, including preparation of wall & priming coat, Two or more cats on wall (smart periodical) complete all a specified and directed.NOTE : Distempering shall be done by an authorised applicator |
| 24 | Providing and applying 1-2mm thick wall care putty on wall over plastered surfce to prepare the surface even and smooth complete all a specified and directed. |
| 25 | Two coats of oil bound distamper on new surface of ceiling including a coat of primer, complete all as specified and directed |
| 26 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters/frame of doors, windows & ventilators/ partitions including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 27 | Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 28 | 4.80mm thick ordinary quality tinted glass, fixed to aluminium frame work in panels not exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 29 | 4.80mm thick ordinary quality tinted glass, fixed to aluminium frame work in panels exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 30 | Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repairs, complete all as specified and directed. |
| 31 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed. |
| 32 | Wall / sink mixer for mixing hot & cold water, chromium plated suitable, and screwed down for 15mm bore GI pipe or union, fixed as in repair complete all as specified and directed. |
| 33 | WHB mixer, for mixing hot or cold water, screwed down for pipe and fixed, suitable for 15mm bore pipe fixed as in repair complete all as specified and directed. |
| 34 | Harrison rails 25 mm size, mild steel, chromium plated with fixing brackets, stops, rollers etc. for curtain rod inclulding taking down defective bracket complete all as specified and as directed. |
| 35 | Towel rail 600mm long of mild steel, chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats, fixed as in repair complete all as specified and directed. |
| 36 | Chromium plated, shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repaircomplete all as specified and directed |
| 37 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, fixed as in repair complete all as specified and directed. |
| 38 | PVC connections 15 mm size with PTMT nuts of length 450 mm , fixed as in repair complete all as specified and directed. |
| 39 | Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 40 | Rolled sections as in main and cross beams, hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe-410 Gde E250, all as specified and directed. |
| 41 | 1.50 mm thick Fibre glass reinforced translucent plain coloured sheeting with fixed with coach screw and washer in roof, wall, fencing etc complete all as specified and as directed. |
| 42 | Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. Please Enable Macros to View BoQ information |
