|
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 2 | Excavation in soft / loose soil for post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed. |
| 3 | M&L for broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 4 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 5 | M&L for providing precast cement concrete louvres and jallies 25 mm thick (measured solid) including all mouldings but excluding frame in cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates and set in cement mortar 1:4 complete all as specified and directed. |
| 6 | M&L brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 7 | S&F rolled mild steel section (for Gazibo) as in joist, channel, angle or tee sections fixed independently, without connecting plates etc (cut to ordinary length i.e within 20 mm of the length indicated) of grade Fe 410-W (Gde E-250) quality 'A' complete all as specified and directed. |
| 8 | S&F steel work (for Gazibo) in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 9 | S&F rolled mild steel section as in plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed |
| 10 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.80 mm thick (for Gazibo), of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of AC corrugated / semi corrugated or translucent sheet as in roof coverings complete all as specified and directed. |
| 11 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 12 | M&L for 10 to 12 mm thick, parking tiles matt finish / Glossy coloured tiles of design as approved, (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 13 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub-floors, sub-bases, floors and paving, etc. complete all as specified and directed. |
| 14 | M&L for chequered cement concrete tiles 25 cm x 25 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 15 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 16 | S&F nucleus recessed mounting adjustable COB LED downlight, 10 Watt , made of aluminium fins and high-lumen LED a light source with clear diffuser and separate electronic driver complete adjusted as per requirement including fixing with clamps, connecting complete all as specified and directed. Please Enable Macros to View BoQ information |
| 17 | S&F nucleus recessed mounting adjustable COB LED downlight, 10 Watt , made of aluminium fins and high-lumen LED a light source with clear diffuser and separate electronic driver complete adjusted as per requirement including fixing with clamps, connecting complete all as specified and directed. Please Enable Macros to View BoQ information |
