|
| 1 | Renovation of Civil work including Chain-Link, mesh fencing and toilet block, yard levling, metalling and repairing and maintenance of old control room at 33/11 KV S/s Reethi Under East Dn. Rewa. |
| 2 | Clearing grass and removal of therubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 3 | Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre Stone aggregate 40mm nominal size and above. |
| 4 | Collection and spreading of metal dust, murum and 40mm graded hard metal in sub-station yard or as required as mentioned below -..Murum |
| 5 | Earth work in excavation by mechanicalmeans (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqmon plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 6 | Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc…….consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 7 | Collection and spreading of metal dust, murum and 40mm graded hard metal in sub-station yard or as required as mentioned below -Metal 40 mm |
| 8 | Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20Cum in depth and dressing complete. With hard muram having …….. in thickness and dressing complete. |
| 9 | Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /sqcm and water absorption not more than 20% in foundation and plinth Cement Mortar 1:6 (1 cement : 6 sand). |
| 10 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers…. etc. complete . Thermo-Mechanically Treated bars. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work ….size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate. |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work ….size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate. |
| 13 | Centering and shuttering in cluding strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick….. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for:…..Foundations, footings, bases of columns, etc. for concrete upto plinth level |
| 15 | Centering and shuttering in cluding strutting, propping etc. and removal of form for: Lintels, beams, girders, bressumers and cantilevers |
| 16 | Centering and shuttering in cluding strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars , Piers, Abutments, Posts and Struts. |
| 18 | Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering….. All work up to plinth level : M-20 Grade Concrete |
| 19 | Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels….concrete grade. M-20 Grade Concrete |
| 20 | 15 mm cement plaster 1:6 (1 cement: 6 sand) |
| 21 | 20 mm cement plaster of mix : 1:6 (1 cement: 6 sand) |
| 22 | Providing and fixing float glass pans 5.5 mm thick |
| 23 | Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type Bincluding jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm)..75 mm diameter |
| 24 | Steel Work welded in built up section … as req…in grating, frames, guard bar , ladder , railings, brackets, gates & similar works |
| 25 | P&L CC 1:3:6 (1 Cement; 3 sand: 6graded stone) 110 mm dia pvc pipe |
| 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain………CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge…. 20 mm nominal outer dia.Pipes. |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain………CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge…. 25 mm nominal outer dia Pipes. |
| 28 | P&F White vitrous china flat back wall corner type lipped front…….. One urinal basin |
| 29 | Providing and fixing PTMT grating of approved quality and colour-.Circular type. |
| 30 | Providing and fixing gun metal non- return valve of approved quality (screwed end) :25 mm nominal bore Horizontal |
| 31 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included j....joints complete as per direction of Engineer-in- Charge.25 mm nominal outer dia.Pipes. |
| 32 | Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore.122 mm long weighing not less than 99 gm |
| 33 | Constructing soak pit 1.20x1.20x1.20 filled with brick bats i/c S/W drain …… design |
| 34 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. |
| 35 | Providing and fixing pressed steel door frames made of 1.6 mm. as directed by Engineer-in- charge: Profile B of 1.60mm thick single rebate of size 80mmx50mm. Fixing with adjustable lugs with split end tail to each jamb. |
| 36 | Providing 40x5 mm flat (iron hold fast 40 Cum long) ...nuts and wooden plugs and embeddings in cement concrete block 30x10x15Cum 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) |
| 37 | Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity asprescribed by the manufacturer. |
| 38 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc.with 6 mm thick clear float glass both side. drawings and direction of Engineer-in-Charge complete. |
| 39 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, uPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 40 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. |
| 41 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore. |
| 42 | Providing and fixing brass stop cock of approved quality 15 mm nominal bore |
| 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed workincluding cutting chases and making good the Wall etc.15 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed workincluding cutting chases and making good the Wall etc.15 mm nominal outer dia .Pipes. 15 mm nominal outer dia .Pipes. |
| 45 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia |
| 46 | Point wiring (excluding metallic switchbox & sheet but including switches,sockets, lamp holders/ceiling roses etc)with 1.5sq. mm. PVC insulated cableFRLS with copper multi strandconductor ISI marked in concealedrigid P.V.C. conduit (HMS) ISImarked of suitable size and 1.5sq. mm.PVC insulated FRLS copper earthcontinuity conductor of green colourinside conduit, screwless connector forjoints etc. as required as perspecification for :-Light point/fan points....Primary short point |
| 47 | Point wiring (excluding metallic switchbox & sheet but including switches,sockets, lamp holders/ceiling roses etc)with 1.5sq. mm. PVC insulated cableFRLS with copper multi strandconductor ISI marked in concealedrigid P.V.C. conduit (HMS) ISImarked of suitable size and 1.5sq. mm.PVC insulated FRLS copper earthcontinuity conductor of green colourinside conduit, screwless connector forjoints etc. as required as perspecification for :-Light point/fan points....Primary medium point |
| 48 | Point wiring (excluding metallic switchbox & sheet but including switches,sockets, lamp holders/ceiling roses etc)with 1.5sq. mm. PVC insulated cableFRLS with copper multi strandconductor ISI marked in concealedrigid P.V.C. conduit (HMS) ISImarked of suitable size and 1.5sq. mm.PVC insulated FRLS copper earthcontinuity conductor of green colourinside conduit, screwless connector forjoints etc. as required as perspecification for :-Light point/fan points...Primary long point. |
| 49 | Point wiring (excluding metallic switchbox & sheet but including switches,sockets, lamp holders/ceiling roses etc)with 1.5sq. mm. PVC insulated cableFRLS with copper multi strandconductor ISI marked in concealedrigid P.V.C. conduit (HMS) ISImarked of suitable size and 1.5sq. mm.PVC insulated FRLS copper earthcontinuity conductor of green colourinside conduit, screwless connector forjoints etc. as required as perspecification for :-3 Pin 6 Amp socket outlet onseparate board..Short point |
| 50 | Point wiring (excluding metallic switchbox & sheet but including switches,sockets, lamp holders/ceiling roses etc)with 1.5sq. mm. PVC insulated cableFRLS with copper multi strandconductor ISI marked in concealedrigid P.V.C. conduit (HMS) ISImarked of suitable size and 1.5sq. mm.PVC insulated FRLS copper earthcontinuity conductor of green colourinside conduit, screwless connector forjoints etc. as required as perspecification for :-3 Pin 6 Amp socket outlet onseparate board..Medium point |
| 51 | Point wiring (excluding metallic switchbox & sheet but including switches,sockets, lamp holders/ceiling roses etc)with 1.5sq. mm. PVC insulated cableFRLS with copper multi strandconductor ISI marked in concealedrigid P.V.C. conduit (HMS) ISImarked of suitable size and 1.5sq. mm.PVC insulated FRLS copper earthcontinuity conductor of green colourinside conduit, screwless connector forjoints etc. as required as perspecification for :-3 Pin 6 Amp socket outlet onseparate board..Long point |
| 52 | Wiring for circuit wiring with PVCinsulated cable FRLS with coppermulti strand conductor ISI marked inconcealed rigid P.V.C. conduit (HMS)of ISI marked suitable size etc. asrequired as per specification..2x2.5 Sq.mm. |
| 53 | Wiring for circuit wiring with PVCinsulated cable FRLS with coppermulti strand conductor ISI marked inconcealed rigid P.V.C. conduit (HMS)of ISI marked suitable size etc. asrequired as per specification..4x2.5 Sq.mm. |
| 54 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 55 | REDAY MADE SEPTIC TANK |
| 56 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. conduit (MMS) ISI marked of suitable size and 1.5sq. mm. PVC FRLS insulated copper earth continuity conductor of green colour inside conduit etc. as required as per specification for :Light point/fan points.Primary short point |
| 57 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. conduit (MMS) ISI marked of suitable size and 1.5sq. mm. PVC FRLS insulated copper earth continuity conductor of green colour inside conduit etc. as required as per specification for :Light point/fan points.Primary medium point |
| 58 | Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. conduit (MMS) ISI marked of suitable size and 1.5sq. mm. PVC FRLS insulated copper earth continuity conductor of green colour inside conduit etc. as required as per specification for :Light point/fan points.Primary long point |
| 59 | Point wiring (excluding metallicswitch box & sheet) for 3 Pin 16 Amp.socket outlet point with 4sq. mm. PVCinsulated cable FRLS with coppermulti strand conductor ISI marked inconcealed rigid P.V.C. conduit (HMS)ISI marked of suitable size etc. with20/16 Amp. F.T. switch & socket/S.S.combined 20/16/6 Amp. of ISI markedand 4sq. mm. PVC insulated FRLScopper earth continuity conductor ofgreen colour inside conduit, screwlessconnector for joints as perspecification for :-On separate board.Short point |
| 60 | Point wiring (excluding metallicswitch box & sheet) for 3 Pin 16 Amp.socket outlet point with 4sq. mm. PVCinsulated cable FRLS with coppermulti strand conductor ISI marked inconcealed rigid P.V.C. conduit (HMS)ISI marked of suitable size etc. with20/16 Amp. F.T. switch & socket/S.S.combined 20/16/6 Amp. of ISI markedand 4sq. mm. PVC insulated FRLScopper earth continuity conductor ofgreen colour inside conduit, screwlessconnector for joints as perspecification for :-On separate board.Medium point |
| 61 | Point wiring (excluding metallicswitch box & sheet but including switches, sockets) for 3 pin 6 Amp. Socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. conduit (MMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board.... |
| 62 | Supplying, fixing & testing of approved make T- 5 lamp channel luminary with epoxy white powder coated CRCA sheet steel housing box type channel with reflector cover including electronic ballast (HF), PF > 0.95, THD <30% complete duly wired (with tube rod) as per specification & fixing as below:I) Fixing on wall/Ceiling on PVC plate Anchor fastenersand other necessary materials including connections etc. and as required. |
| 63 | Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including nnections with all necessary material complete of approved as required confirming to IS 74/1979 with up to date ammendments.Ceiling Fan (5 star & ISI)-1200 mm Sweep |
| 64 | Supplying and fixing of approved make Resistance type Fan regulator including connection etc. as required on existing board |
| 65 | Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :SINGLE POLE (SP) 6 Amp to 32 Amp Rating |
| 66 | Supply of ISI marked and accepted standardof miniature circuit breaker (MCB) of 'C'series with short circuit indication, suitablefor 240/415 Volts,50 Cycle, 10 kA/15 kAValue AC supply conforming to IS : 8828 :1996, IEC : 60898 :2002 & 60947-2 butwithout enclosures :- |
| 67 | Supply and fixing Led tube rod comprising ofLED tube with non-integral/integral driver, upto...Tube light LED 1 X 20/22Watt, Integral i/cbatten aluminium body, PC diffuser. |
| 68 | Providing and placing on terrace (at all floor levels) polyethylene water storage….suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 69 | Supplying, erection and testing of approvedmake electric Ceiling fan of double ballbearing complete with standard down rod,canopy, hanging shackle, Aluminium blades,without regulator,…..Ceiling Fan (ISI marked)-1200 mm Sweep,with minimum air delivery 210 m³/min andservice value ≥ 4.00 as per BEE.. |
| 70 | Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories and providing .. 2.7 metre long etc. (but without charcoal or coke and salt) complete as required |
| 71 | Supply and fixing of approved makeflush type step type electronic fanregulator including connection etc. asrequired on existing board..100 watt |
| 72 | Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface….specifications and direction of Engineer-in- Charge. 80 mm thick C.C. paver block of M-35 grade |
| 73 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature,….by Engineer-in- Charge. |
| 74 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, Like birla white /JK white or equivalent, over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. |
| 75 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 76 | Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding.New work (Two or more coat applied @1.67ltr/10sqm ….vertical surface) |
| 77 | Applying priming coats with primer of approved brand and manufacture, having low VOC ...content. With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. |
| 78 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of ….with ordinary paint of approved brand and manufacture. |
| 79 | Painting with aluminium paint of approved brand and manufacture to give an even shade . Two or more coats on new work |
| 80 | Supply and fixing street light with high power LED of 3 to 6 Watt each on existing bracket assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output with efficacy>120 lm/Watt. luminiare having color temp upto 6500K & 50000 hrs. burning life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF> 0.95 & surge protection 10KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347 i/c connection wire, testing etc. to complete the job...40Watt to 48Watt, color temp 3000-6500k as required |
| 81 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating..... wherever required. |
| 82 | Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm)..... @3.3 kg per sqmincluding pointing the joints with white cement and matching pigments etc., complete. |
| 83 | Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm)....(1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. Please Enable Macros to View BoQ information |
