Tender For Refurbishing Physical Health Infrastructure For Chc Borigumma Under Ama Hospital., Koraput-Odisha

TDR : 55249427

Tender Notice
BOQ

13 Days Left

Koraput , Odisha

Tender Brief : Tender For Refurbishing Physical Health Infrastructure For Chc Borigumma Under Ama Hospital.

Document Fees
₹ 10000 /-

EMD
₹ 225000.0 /-

Tender Value
₹ 2.25 Crore /-

Submission Date
11-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost of all labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.
2	Providing close graded Granular Sub-base Grading -II materials as per table 400.1 spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with Rotovator at OMC and compacting with Vibratory roller to achieve the desired density.
3	Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.
4	Dismantling brick or stone masonary below 3.00m height in lime or cement including stacking & useful materials and the removing debries within 50m lead.
5	Dismantling brick or stone masonary above 3.00m height in lime or cement including stacking & useful materials and the removing debries within 50m lead with all leads and lifts and all labour with T & P required for the work etc. complete in all respect.
6	Dismantling old tile dados and skriting from wall including stacking & useful materials and the removing debries within 50m lead with all leads and lifts and all labour with T & P required for the work etc. complete in all respect.
7	Dismantling and removing 2.5Cm thick artificial stone flooring including stacking the useful materials for re-use and removing the debris away from the work site with all leads and lifts and all labour with T & P required for the work etc. complete in all respect.
8	Dismantling and removing GCI Sheet including stacking the useful materials for reuse and removing the debris with all leads and lifts from the work site including cost of all labour with T&P required for the work etc. complete as directed by the Engineer-in-Charge.
9	Dismantling and removing RCC roof slab including stacking the useful materials for reuse and removing the debris with all leads and lifts from the work site including cost of all labour with T&P required for the work etc. complete as directed by the Engineer-in-Charge.
10	Dismantling and removing old doors, windows and ventilators including the removal of frames, hinges, fastening and stacking the useful materials for reuse and removing debris from work site including cost of all labour with T & P required for the work etc. complete as directed by the Engineer-In-Charge.
11	Earth work in ordinary soil with 50m initial lead and 1.5m initial lift including rought dressing and breaking clods to maximum 5cm 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-In-Charge.
12	Filling in foundation trenches and plinth with good river sand well watered and rammed in layers not exceeding 23cm. in depth with all leads and lifts including cost, conveyance, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
13	Cement concrete of proportion (1:3:6) in foundation and floors using 4Cm (3/2 inch) size clean hard black broken granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15Cm. (6 inch) thick to the required level, ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials and labour with T&P required for the work etc. complete as directed by Engineer-In-Charge.
14	RCC of M-25 grade (equivalent to a nominal mix of proportion 1:1.5:3) as per approved designs and drawings having a minimum compressive strength (in work test) of 200kg/cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12mm to 20mm size black hard crusher broken granite chips (20mm size chips not to exceed 25%) and screened and washed sharp sand for mortar of approved quality from approved qarry to be mixed in concrete mixture including hoisting, lowering, laying and compacting concerete by using vibrators, watering and curing for 28 days, centring and shuttering then after dismantling and removing debries from the work site and finishing the exposed surface smooth including cost, conveyance, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete but excluding cost and conveyance of M.S. rods or Tor steel and binding wires of 18 to 20 guage and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper position in all floors as directed by the Engineer in Charge. Column footing
15	Plinth Bend
16	Column Superstructure Ground floor
17	First Floor
18	Second Floor
19	Lintel Ground floor
20	First Floor
21	Second Floor
22	Chajja Ground Floor
23	First Floor
24	Second Floor
25	Roof Beam Ground floor
26	First Floor
27	Second Floor
28	Roof Slab Ground Floor
29	First Floor
30	Second Floor
31	Stair Case Ground Floor
32	First Floor
33	Supplying, cutting, straightening coiled or bent up M.S. rods or Tor steel of SAIL (HYSD Fe-415) welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for RCC works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer in Charge. Ground floor
34	First floor
35	Second floor
36	First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.
37	First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. Ground Floor
38	First floor
39	Second floor
40	12mm (1/2 inch) thick cement plaster (1:6) finished smooth to brick work after racking out joints including watering and curing, cost, conveyance, royalties and taxes of all materials, labour with T&P required for the work etc. complete in all respect in all floors. Ground floor
41	First floor
42	Second floor
43	16mm (5/8 inch) thick cement plaster (1:6) finished smooth to brick work after racking out joints including watering and curing, cost, conveyance, royalties and taxes of all materials, labour with T&P required for the work etc. complete in all respect in all floors. Ground floor
44	First floor
45	Second floor
46	6mm thick cement plaster (1:4) finished smooth to rcc surface after racking out joints including watering and curing, cost, conveyance, royalties and taxes of all materials, labour with T&P required for the work etc. complete in all respect in all floors. Ground floor
47	First floor
48	Second floor
49	Providing & fixing of 32mm flush door shutter made out of 32mm BWR Block board and pested with both side 4mm thick veneers sonear african teak as approved including malamine polish at both side and including of all cost, conveyance etc all complete.Ground floor
50	Supplying, fitting & fixing of MS J section / MS Flat / Grill / shutter etc of approved design in proper position and making good to the damages to wall or RCC structure including mending or cutting to sizes or grooves in walls and fixing with C.C (1:2:4) with cost, coveyance, royalties and taxes of all materials with all labour, T&P required etc. complete in all floors. Ground Floor
51	Supplying, fitting & fixing of window (sliding type made up alminum section) 151-154,151-155, as windows frame section No.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour T & P etc complete as per direction of Enginner -in charge. Ground Floor
52	Providing and laying Vitrified flooring tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (Icement: 4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-ln-Charge at all floors and all heights. Ground floor
53	First Floor
54	Providing and laying Ceramic skirting tiles 300x300 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 12 mm thick cement mortar 1:3 (Icement: 3coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-ln-Charge at all floors and all heights. Ground floor
55	First Floor
56	Providing and laying Industrial Vitrified flooring tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights. Ground floor
57	First Floor
58	Granite Tiles Floor
59	Providing and laying Industrial Vitrified skirting tiles 300x300 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 12 mm thick cement mortar 1:3 (1cement: 3coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights. Ground Floor
60	First Floor
61	Granite Tiles Dado
62	Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. Ground Floor
63	First Floor
64	Second Floor
65	Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-charge at all elevations including all material labour complete. Ground Floor
66	First Floor
67	Second Floor
68	Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion \\"Royale Shyne\\" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. over a coat of primer including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge. Ground Floor
69	First Floor
70	Second Floor
71	Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer - In-Charge at all floors and all heights including all material & labour complete. Ground Floor
72	First Floor
73	Second Floor
74	Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect. Ground Floor
75	First Floor
76	Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor. First Floor
77	Second Floor
78	Plain cement concrete (1:2:4) using 6mm to 12mm (¼ inch to ¾ inch) size (18mm not to exceed 25 percent) hard black broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering and curing including cost of all labour T & P royalties etc. required for the work as directed by the Engineer-In-Charge .
79	Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
80	Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.
81	Supplying and fixing of Prepainted Sheet (0.40mm thick ) in roof in roof drilling holes in windties including fixing of ridges valleys windties etc. including cost of all labour T & P royalties etc. required for the work as directed by the Engineer-In-Charge .
82	Supplying, fitting & fixing of M.S. Square Angles including of all cost, conveyance etc all complete.
83	Providing, fitting & fixing up partition walling OEL aluminium anodised section No. 9210 and 9207 as single groove and double groove respectively as horizantal and vertical member and OEL section 4660 as Tapered clip for fixing up 12mm thick prelaminated board (Nova pan Make) and jointing angle No.1855 etc.
84	Providing , fitting & fixing of Al. door with OEL anodized Al. door section of 9202 aas vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick prelaminated board in botttom portion fixed on door frame by means of tapered clip No.4660 and frame to be completed bt means of jointing angle No.1855 including all cost of labour T & P hire charges of drilling machine labour charges etc complete.
85	Providing and fixing Structural glazing approved make to be fabricated from roll formed sections made of prepainted steel (base steel as per IS-513 of 0.6mm thick D quality galvanized as per IS-277 with zinc of 12gm per sqm) with primer of 5-75.7 microns thick and finished paint with polyster paint (Black / Pearl White / Chocolate brown) of 12-16 microns alongwith the alkydbacker at the back of 5-7 microns and the sizes of outer frame being 46 x 52mm and with all vertical & horizontal mullions are of 46 x 70mm and fixed beading are of 18 x 25mm. Sections for internal top and bottom frames in the louvered area should be 18x25mm. Assessories / gaskets are to be used as per the manufacturers supply and specification like handle being made of high grade aluminium powder coated and with nylon recever and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be glass filled nylon. The sections are to be cut to length jointed and assembled by means of corner bracket and frames are fixed to the concrete / masonry walls by means of self expanding screws and glass to be used with safety laminated glass of 12.38mm thick with 0.76mm inter layer poly vinyl butyral (Pvb_lamination between two glass with outer being 12.76mm thick toughened reflective of Reflectsol series of Sain Globin & inner glass being of 6mm thick toughened clear of Saint Globin make with all taxes.
86	Providing & fixing of wall panelling made out of Aluminium section B9835 as Horizontal & vertical member placed @ 600mm c/c covered with 9mm thick BWR ply and 3mm thick ACP (wooden finish of Timex bond) & applied with approved jointing materials (Silicon) with cost of all materials, labours & T&P etc. complete
87	Providing, fitting & fixing up aluminum shape diamond mesh including the cost of all materials, cost of labour, conveyance, taxes of all materials, T&P etc all complete as per the direction of Engineer-In-Charge.
88	Providing & fixing of 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-In-Charge including the cost of all materials, cost of labour, conveyance, taxes of all materials, T&P etc all complete as per the direction of Engineer-In-Charge.
89	Fitting fixing of mosquito net mesh made out of G.I wires including the cost of all materials, cost of labour, conveyance, taxes of all materials, T&P etc all complete as per the direction of Engineer-In-Charge.
90	RCC of M-25 grade (equivalent to a nominal mix of proportion 1:1.5:3) as per approved designs and drawings having a minimum compressive strength (in work test) of 200kg/cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12mm to 20mm size black hard crusher broken granite chips (20mm size chips not to exceed 25%) and screened and washed sharp sand for mortar of approved quality from approved qarry to be mixed in concrete mixture including hoisting, lowering, laying and compacting concerete by using vibrators, watering and curing for 28 days, centring and shuttering then after dismantling and removing debries from the work site and finishing the exposed surface smooth including cost, conveyance, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete but excluding cost and conveyance of M.S. rods or Tor steel and binding wires of 18 to 20 guage and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper position in all floors as directed by the Engineer in Charge. Drain Bed
91	Drain Wall
92	Drain Slab
93	Providing, fitting & fixing of G.I. Pipes of 100mm dia including the cost of all materials, cost of labour, conveyance, taxes of all materials, T&P etc all complete as per the direction of Engineer-In-Charge.
94	Filling in foundation trenches and plinth with excavted earth including cost, conveyance, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
95	EI Works: Supply, packing, transportation, unloading, installation, testing and commissioning of following size Outdoor P4 LED Video Display on a complete turnkey basis, including the following: P4 outdoor LED modules with minimum 6,000 nits brightness, greater than 3840 Hz refresh rate, 16-bit grayscale Nationstar / Kinglight LEDs housed in die-cast aluminum IP65 cabinets. Complete LED cabinets with receiving cards and Meanwell / G-Energy power supplies NovaStar / Colorlight control system with sending unit, licensed software and HDMI/LAN input Ambient light sensor for automatic day/night brightness control with manual override Heavy-duty powder-coated MS mounting structure designed for outdoor wind load conditions All required power and data cabling, connectors and weatherproof accessories Power distribution panel with MCB, surge protection and proper earthing Safe packing in wooden crates, transportation to site (~700 km from Kolkata), unloading and handling Transit insurance for full material value up to site handover Complete erection, alignment, configuration, color calibration, testing and trial run. Supply of minimum 3% spare LED modules and minimum 2 spare power supplies Operator training and system documentation Remote technical support during warranty period (response within 24 hours) Two (2) years comprehensive onsite warranty Unit: 1 Job (Lump Sum) Scope: All materials, labour, logistics and accessories required for complete and functional operation. Note: No extra payment shall be made for any item required to complete the system. 12 ft (W) × 10 ft (H)
96	8 ft (W) × 6 ft (H)
97	PH Works: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge (Supreme/ Finolex/ Oriplast make)20mm dia C-PVC pipe SDR-11Ground Floor
98	First Floor
99	25mm dia C-PVC pipe SDR-11Ground Floor
100	First Floor
101	32mm dia C-PVC pipe SDR-11Ground Floor
102	First Floor
103	40 mm dia C-PVC pipe SDR-11 Second Floor
104	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(Plaza/Cera/Hindware make)15mm dia CP angle stop cock
105	15mm dia CP Bib cock
106	15mm dia CP Long body Bib cock
107	15mm dia CP two way bib cock
108	25mm dia CP Health Faucet
109	15mm dia CP Pillar cock
110	20mm dia CP concealed stop cock
111	25mm dia brass full way valve (Shakti make)
112	32mm dia brass full way valve (Shakti make)
113	40mm dia brass full way valve (Shakti make)
114	15mm CP Extension piece
115	125mm CP grating
116	15mm size C.P. flange
117	Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank
118	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
119	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
120	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
121	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
122	75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
123	110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make)
124	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
125	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
126	110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
127	110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
128	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
129	110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
130	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
131	75mm U-PVC plain bend(Ori Plast/Finolex/Supreme Make)
132	75mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
133	75x75x75mm U-PVC double equal door Tee(Ori Plast/Finolex/Supreme Make)
134	75mm U-PVC vent cowl(Ori Plast/Finolex/Supreme Make)
135	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI p or s trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer make)
136	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral p or s trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeEuropean water closet with S trap plain(Hindware/Parryware/Neycer make)
137	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
138	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with 22 inch x 16 inch pedestal
139	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge20mmx600mm long CP towel rail
140	Towel ring
141	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder
142	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf with CP/NP guard rails.
143	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror (swivelled type)
144	Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24 inch x 18 inch x 10 inch sink(Parryware make)
145	Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinalStall Urinal - Flat Back stall type magnum urinal
146	Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
147	Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
148	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeGround Floor =
149	First Floor =
150	Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 30cmx30cmGround Floor
151	First Floor =
152	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.Ground Floor
153	First Floor
154	Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 45cmx30cmGround Floor
155	First Floor
156	Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 15 x 0.75 x 2.05
157	Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in chargeAqua guard pure Chill 80 PSS UV
158	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge110mm dia u-pvc pipe alround concrete
159	160mm dia u-pvc pipe alround concrete
160	Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge-Inside size 76cmx76cmx46cm with 18 inch dia RCC MH cover
161	Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
162	1 no 30 Users Septic TankEarth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
163	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
164	Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge..
165	Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete..
166	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
167	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
168	Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
169	Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-chargeRCC floor, roof slab chhaja up to 4.430 m height
170	Supplying all materials.labour.T&P and providing brick work in foundation and plinth with 23cmx111cmx8cm size Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:6 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
171	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
172	Supplying all materials,labour,T&P and providing 16mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
173	Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
174	Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
175	Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
176	DOL Control panel
177	40mm dia steel short piece
178	2.50sqmm flat cable
179	Steel rope with cover Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Turnkey Projects Tenders

Infrastructure Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Refurbishing Physical Health Infrastructure For Chc Borigumma Under Ama Hospital., Koraput-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Refurbishing Physical Health Infrastructure For Chc Borigumma Under Ama Hospital., Koraput-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us