|
| 1 | Taking down carefully ceiling fan/exhaust fan/wall mounting fan any height of bldgs, type and size for replacement and re-fixing in same or in other location or depositing to MES store yard of AGE E/M(W) complete all as specified and directed. |
| 2 | M&L for making good surface body painting of ceiling fan main body complete with blade & down rod by spray painting one coat of synthetic enamel white paint complete all as specified and directed. |
| 3 | M&L for strip opening of unsv fan of any type and size identify the defect, over hauling by removing dust from field coil, armature, providing lubrication , greasing on bushes and bearings for smooth running complete with and including replacement of U/S parts such as screw, check nut, washer, split pin, lock nuts, connectors, Gun metal bushes/ rubber reel/bearings including jointing, soldering of wire, reassembling the fan and checking it mechanically and electrically for its proper functioning and smooth running etc complete all as specified and directed.Note : Gun metal bushes, bearings of desired size will be measured and paid under relevant items here-in-after. |
| 4 | M&L for rewinding of ceiling fan of size 1200mm to 1400mm sweep fans AC single phase any make, model with supper enameled copper winding wire of existing size and turns & applying proper insulating material such as varnish, cotton tape and fiber sleeves etc complete all as specified and directed. |
| 5 | All as per item No 4 above but Exhaust fan 225mm to 300mm sweep |
| 6 | All as per item No 4 above but Exhaust fan 375mm to 450mm sweep |
| 7 | All as per item No 4 above but Table fan/Pedestal fan/Air circulator Fan of sweep 400mm |
| 8 | Supply only gun metal bush for any type and size of fan as per existing specifications complete all as specified and directed. |
| 9 | Supply only ball bearing No. 6201 |
| 10 | Supply only ball bearing No. 6202 |
| 11 | Supply only ball bearing No. 6203 |
| 12 | Supply only ball bearing No.L-5 6000 |
| 13 | S & F in replacement rubber reel of suitable size for ceiling fan complete all as specified and directed. |
| 14 | S & F in replacement capacitor of 2.5 MFD capacity suitable for fan complete all as specified and directed. |
| 15 | S & F in replacement capacitor of 6 MFD capacity suitable for fan complete all as specified and directed. |
| 16 | S & F in replacement mild steel clamp for holding ceiling fan with nut, bolt & split pin etc complete all as specified and directed. |
| 17 | S & F in replacement flexible cord twin core copper wire of size 0.5 Sqmm for fans from ceiling rose to fan and connecting up complete all as specified and directed. |
| 18 | S & F in replacement canopies (upper & lower) set of 02 Nos with locking screw of ceiling fan any type/size/model of fans complete all as specified and directed. |
| 19 | S & F in replacement blades of required size/model duly balanced and painted (factory made) suitable for ceiling fan size 1200mm to 1400mm complete all as specified & directed. |
| 20 | S & F in replacement 15mm dia and 450 mm long GI light grade down rod for ceiling fan duly drilled holes, split cutting as directed including painted all as specified and directed. |
| 21 | S & F in replacement 15mm dia and 1000mm long GI light grade down rod for ceiling fan duly drilled holes, split cutting as directed including painted all as specified and directed. |
| 22 | S & F in replacement 15mm dia and exceeding 1 mtr & not exceeding 2 mtr length long GI light grade down rod for ceiling fan duly drilled holes, split cutting as directed including painted all as specified and directed. |
| 23 | S&F in replacement fan hooks of length 30 to 45 cm long fabricated from MS flat of size 40x6mm including nuts, bolts and washer suitable for fixing on structural steel trush/ hoding trush as applicable at site. complete all as specified and directed. |
| 24 | M&L for in replacement of rusted/ worn out exhaust fan kit with blade of size 450 mm sweep of minimum 90 watt, 230 volt copper bound suitable for fixing in desert cooler with mounting 04 Nos steel strips complete all as specified and directed. |
| 25 | Material and labour for making hole in wall of size 225 mm to 300 mm dia for fixing of exhaust fan and making good the disturbed surface as per existing complete all as specified and directed. |
| 26 | Taking down desert cooler of any capacity/ make and in any position from site for necessary replacement/overhauling work and oiling and greasing of fan kit/ exhaust fan and pump motor and replacement of U/S worn out nuts, bolts and washer complete and re-fixing the same in existing location complete all specified and as directed by Engr-in-Charge.Note:- Replacement/ overhauling/ painting will be measured and paid seperately. |
| 27 | M&L for desert cooler of any capacity/ make and in any position from site and cleaning the inside & outside surfaces of steel body desert cooler for painting the inside serfaces with one coat of synthetic enamel paint over one coat of red oxide primer and painting of outside surfaces with & including one coat of synthetic enamel paint complete all specified and as directed by Engr-in-Charge. |
| 28 | S&F in replacements, new wood wool pad covered/ packed by GI wire mesh suitable for desert coolers any size complete all as specified and directed. |
| 29 | S&F in replacements, new submersible pump motor 40 watt to 60 Watt discharge 3800 to 4500 Ltrs per Hrs at 2.5 feet head suitable to operate at AC 230 volts single phase supply suitable for desert cooler complete all as specified and directed. |
| 30 | M&L for taking out the burnt winding of exhaust fan of 375mm to 450 mm sweep from desert cooler and rewinding the same with and including superior quality enameled copper winding wire of existing gauge and No of turns including proper insulation with top quality insulating material such as varnish, glass paper, sleeves, cotton tape and replacement of gun metal bushes/ bearingas and re-fixing the same into its original position and testing on completion complete all as specified and directed. |
| 31 | Supply & fixing heavy duty metal blade desert cooler motor kit of size 400 mm sweep Exhaust Fan and fan speed 2340 RPM, minimum air delivery 95 m3/min, copper wounded two phase 240 volts, 50 Hz, power consumption 90 W cooler motor Kit complete 500mm Dimenions (L x W x H): 433x462x75 mm suitable for fixing in desert cooler with mounting 04 Nos steel strips (legs) complete all specified and as directed by Engr-in-Chagre. |
| 32 | S&F in replacements, capacitor of 4 MFD capacity suitable for desert cooler complete all as specified and directed. . |
| 33 | S&F in replacement 3 Pin plug top, 5/6 Amps, ISI marked 230 volts fixed on desert coolers complete all as specified and directed. |
| 34 | Supply & fixing of desert cooler's body in replacement, over all size 0.75Mx0.75Mx0.88M having tank size 0.75Mx0.75Mx0.20M made out of 22 gauge PGI sheet by means of fabrication welding/ rivet jointing with and including front grill of size 0.46Mx 0.46M alongwith provn for air flow direction, 03 Nos perforated side panels of size 0.68Mx0.61M of each including wood wool pads not less than 3.50Kg/ Sqm with and including provn for water flow from tank to pads i.e PVC flexible/ hard pipes of required sizes alongwith necessary PVC fittings but excluding submersible pump, PVC/ Matel front grills and also having electric control panel consisting of two nos 5 Apms switches, one no rotary type speed regulator switch complete all as specified and directed. |
| 35 | Supply & fixing of PVC front grills of desert coolers in replacement of existing size with and including piano type switch complete all as specified and directed. |
| 36 | Taking down water heater (Geyser) of capacity 25/35/50 Ltrs for repair/ replacement the U/S parts & refixing in original location duly repaired/ replacement as directed by Engineer-in-charge of any make after disconnecting all electric connections including hot and cold water connections and making good surface body by spray painting (one coat) with synthetic enamel white paint of water heater (Geyser) outer body complete and MES numbering all as specified and directed by Engr-in-Charge.Note:- (a) Cost of painting and MES numbering includes in qouated rate by contractor.(b) Replacement spare parts/ servicing will be measured and paid separately under appropriate items here-in-after. |
| 37 | Labour for disconnecting assembly of Geyser 25 Ltrs capacity of any make/ shape ,inspecting the serviceability state of all parts and carry out complete descaling of all serviceable parts such as inner tank, geyser assembly, thermostat, heating element etc with cleaning rod, brush or cleaning solution (chemicals) or any other suitable method and reassemble the geyser complete including replacing the unservicable parts with new parts to make the geyser serviceable complete all as specified & directed. |
| 38 | All as per item No. 37 above but Geyser of 35 Ltrs capacity. |
| 39 | All as per item No. 37 above but Geyser of 50 Ltrs capacity.Note for item No. 37, 38 & 39:- Replacement of any un serviceable parts required for making the geyser serviceable shall be measured and paid separately under respective item here-in-after as supply only. |
| 40 | Supply only steel inner tank of 25 Ltrs capacity with any number of holes for fixing under item No. 37 here-in-before complete as specified and directed. |
| 41 | Supply only steel inner tank of 35 Ltrs capacity with any number of holes for fixing under item No. 38 here-in-before complete as specified and directed. |
| 42 | Supply only steel inner tank of 50 Ltrs capacity with any number of holes for fixing under item No. 39 here-in-before complete as specified and directed. |
| 43 | Supply only cover outer complete including top and bottom suitable for 25 Ltrs capacity geyser of any make, shape & size as per existing but gauge of sheet not less than 22 SWG for fixing under item No. 37 here-in-before complete as specified and directed. |
| 44 | Supply only cover outer complete including top and bottom suitable for 35 Ltrs capacity geyser of any make, shape & size as per existing but gauge of sheet not less than 22 SWG for fixing under item No. 38 here-in-before complete as specified and directed. |
| 45 | Supply only cover outer complete including top and bottom suitable for 50 Ltrs capacity geyser of any make, shape & size as per existing but gauge of sheet not less than 22 SWG for fixing under item No. 39 here-in-before complete as specified and directed. |
| 46 | Supply only geyser assembly with Rubber gasket 5 mm thick of copper, 6 holes suitable for 25 ltrs capacity geyser complete as specified and directed. |
| 47 | Supply only geyser assembly with Rubber gasket 5 mm thick of copper, 9 holes suitable for 35/50 ltrs capacity geyser complete as specified and directed. |
| 48 | Supply only Heating element 2000 watts rating operated on 220 volt AC in round/tringle shape with rubber gasket complete as specified and directed. |
| 49 | Supply only Heating element 1500 watts rating operated on 220 volt AC in round/triangle shape with rubber gasket complete as specified and directed. |
| 50 | Supply only Thermostat rating operated on 220 volt AC suitable to adjust the temperature from 0º C to 80º C complete as specified and directed. |
| 51 | Supply only heat resistant rubber ring of existing size to the lower and upper housing of geyser, any make / size complete as specified and directed. |
| 52 | Supply only Air release valve (weight type) complete as specified and directed. |
| 53 | Supply only fusible plug type air release valve complete as specified and directed. |
| 54 | Supply only Neon Indicator lamp of round/rectangular shape / size / colour complete as specified and directed. |
| 55 | S&F in replacement galvanized iron nuts, bolts and washers (not exceeding the size 50 mm x 6mm) or existing size complete all as specified & directed |
| 56 | S&F in replacement 15mm dia stop cock, cast copper alloy, out side thread, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified & directed. |
| 57 | S&F in replacement bib taps 15mm bore, cast copper alloy with crutch or butterfly handle , screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed. |
| 58 | S&F in replacement Brass CP wall mixer for mixing hot & cold water iron pipe of size 15 mm bore and fixed cast copper alloy with crutch , screwed down, screwed for complete all as specified & directed. |
| 59 | S&F in replacement PVC connection 15mm bore, 450mm long in any position with both end brass nut with inner threading and washer suitable for cold water connection complete all as specified & directed. |
| 60 | S&F in replacement heavy duty heat resistance PVC connection 15mm bore,450mm long in any position with both end brass nut with inner threading and washer suitable for Hot water connection complete all as specified & directed. |
| 61 | S&F in replacement fastener mild steel 100 mm long x 10 mm dia with pin and bolts complete for hanging of geyser and making good the disturbed surfaces including plastering and white washing complete all as specified & directed. |
| 62 | S&F in replacement 15mm bore 'medium grade' galvanized iron tubing with all fittings fixed on walls, ceiling or laid in floors complete all as specified and directed. |
| 63 | S&F in replacement 20mm bore 'medium grade' galvanized iron tubing with all fittings fixed on walls, ceiling or laid in floors complete all as specified and directed. |
| 64 | S & F in replacement metal plug top 20 amp complete all as specified and directed. |
| 65 | S & F in replacement metal plug socket 20 amp complete all as specified and directed. |
| 66 | S&F in replacement 3 Pin plug top, 15/16 Amps, ISI marked 230 volts fixed on geyser complete all as specified and directed. |
| 67 | Supply only for electric water heater, storage type steel body with fiber glass coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. including fastener mild steel 100 mm long x 10 mm dia with pin and bolts complete for hanging of geyser all as specified and directed. |
| 68 | Taking down Solar Water Heating Plant of Capacity 100/ 200/ 500 LPD for repair/ replacement the U/S parts & refixing in original location duly repaired/ replacement as directed by Engineer-in-charge of any make after disconnecting all electric connections including hot and cold water connections and painting by spray (one coat) with synthetic enamel white paint of solar water heater outer body complete and MES numbering installed for Md Accn at WAC Line and certain OTM Acnn at various units all as specified and directed by Engr-in-Charge Note :-(a) Cost of painting and MES numbering includes in qouated rate by contractor.(b) Replacement spare parts/ servicing will be measured and paid separately under appropriate items here-in-after. |
| 69 | Material & Labour for disconnecting, desmentling of hot and cold water storage tank and collector plate for cleanning with required chemicals throughly and flushing out deposited scales with clear water and refixing all items and dusting off solar heating plate including replacing the unservicable parts with new parts to make the solar water heating plant serviceable complete in position, testing for entire setisfaction of Engr-in-Charge |
| 70 | Supply & fix in replacement of PVC flexible hose pipe 4 PR suitable for hot water of size 25 mm bore pipe with 6 mm PVC wall thickness complete all as specified & directed. |
| 71 | Supply & fix in replacement of temprature gauge dial type 100 mm dia dial suitable for 0 degree centigrade to 80 degree centigrade with adopter complete all as specified & directed. |
| 72 | Supply & fix in replacement of thermostate switch suitable for solar water heating plant acomplete all as directed & specified. |
| 73 | Supply & fix in replacement of safety release valve suitable for solar water heating plant complete all as directed & specified. |
| 74 | Supply & fix in replacement of heating elecment coil type of capcaity 3 KW operated at 240 volt AC supply complete all as directed & specified. |
| 75 | M&L for replacement 3 core flexible copper conductor PVC insulated cable suitable for solar water heating plant and over all PVC sheathed 1100 volt grade of size 4 Sqmm for heating element supply duly fixed on wall with PVC conduit pipe with saddeles, screws & PVC gully etc complete all as directed & specified. |
| 76 | S&F in replacement ceiling fan, 1200mm sweep, minimum 220 CFM, 230 V, BEE 5 star rated, BLDC (brushless direct current motor ) type complete with standard accessories i.e (three blade, 02 Nos canopy, electronic type modular fan regulator 90 to 100 W and complete with remote for operating, down rod of length 1.5 mtr to 2.0 mtr long, 01 No. fan hock, 02 Nos hanging clamps with rubber real insulator, nuts, lock nuts, bolts, washers, split locking pins etc), double ball bearing, copper wound with synchronous motor, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm strandard copper conductor 3 core flexible cable cord complete all as specified and directed. |
| 77 | S&F in replacement iron metal body Exhaust fan 300mm sweep, 230 volts, 50 Hz, including connecting from ceiling rose to fan connector complete all as specified and directed. |
| 78 | S&F in replacement PVC body fresh air circulating fan with PVC louvers of size 225 mm to 300 mm sweep, 230 volts, 50 Hz, including connecting from ceiling rose to fan connector complete all as specified and directed. Please Enable Macros to View BoQ information |
