|
| 1 | Supply and Erection of of PU Painted 3 Mtr. Decorative Pole made out of GI Pipe with MS Base Plate Dia 470 x 8mm, Alu Casting on Base & Joint, Inbuilt Control Box at the bottom of the pole for space for Housing MCB & Terminal strip etcSpecification of Pole Sections: 1st Section - Ø165.1 x 1000mm 2nd Section - Ø84 x 2000mm (Groveed Pipe) Without Bracket With Foundation Bolt 16x450x4nos Without light With Polyurthane Painted as per your given color shade With Electrical Accessories like - Backlite Sheet, & Wire. Make VSTP VSTP DP-13-30, Twinkle METROPOLIS-90-Q-CI Pole |
| 2 | Supply and Erection of 40W Post Top LED Light fixture made of Aluminum Die Cast & Aluminum Spun housing (W-440 H- 880 minimum) with front opening PC Diffuser having IP65 protection, Power LED’s mounted on metal clad PCB’s then mounted onextruded/ cast aluminium Heat Sinks. PF>.90 , Lumen-110/w with High Efficiency LED, THD-10%, potted driver with 6KVA surge Protection.Make - LuxMax ALLIANCE LARGE - LED Post. Twinkle LuxMax-PT-162(Alliance Large)/ VSTP PT 11. |
| 3 | Supply and Erection of PU Painted Decorative Double Arm Bracket made out of GI Pipe as per Cat No. VSTP B025 with Suitable Sleeve.Make VSTP (VSTP B025)/ Twinkle LuxMax-BKT-61 |
| 4 | DOUBLE WALLED CORRUGATED (DWC) HDPEPIPES: Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid1/2mtr. below ground level including excavation placing the pipe in position andback filling with excavated soil etc. of therequired size Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) |
| 5 | XLPE INSULATED UN-ARMOURED CABLES(LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathedUn-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laidloose in the existing trench or pipe as per PWD General Specifications Overall size 16sq.mm (4Core) Un-armouredLoose) |
| 6 | Supply and erection of PVC insulated FR singlecore Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts gradeconfirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respectas desired by the Engineer-in-charge Overall size 1.5sq.mm (Un-sheathed) |
| 7 | TIMER: S/E of Microprocessor Based Street Light Controller with digital time switch daily programmed with stand by lithium battery with back up of 6 years with min. time between 2 switching operations is 1 minute, three pole power contactors 40A. with coilvoltage 220-230V AC with 1 no. aux. contact NO, MCB 2 pole 40amp. (C-Curve, 10kA) & power wiring with single core PVC insulated FR cable 10 sq. mm and control wiring with PVCinsulated FR cable 1 sq. mm, 1 no. two position selector switch to bypass timer and other accessories & petty material (din rail, 4 pole bakelite terminal strip 63A/ 440V AC,required nut bolts) should be fixed on bakelitesheet 6mm thick to be mounted in a IP54 surface/ flush mounting powder coated sheetmetal (1.60mm thick) cabinet having size 450mm x 600mm x 150mm to switch ‘ON’ allthe 3 phases & switch ‘OFF’ 3 phases pre-fixedtimings complete in all respect as per satisfaction of Engineer-in-charge:-Street Light Controller (For Three Single Phase Circuits) with 3 Nos. Three Pole Power Contactors 40A, 1 no. aux. contactor 6 amp. (2NO+2NC) with coil voltage 220V AC, 3 Nos. MCB 2 Pole 40amp. (C-Curve,10kA) & petty material (Din rail, 2 Nos. 4 pole bakeliteterminal strip 63A/ 440V AC, required nut bolts) |
| 8 | GALVANIZED IRON PIPES AND G.I. EARTHINGSupply & erection of G.I. pipe (A-Class) as per IS:1239 (Part-I) 2004 including sockets,bends, inspection boxes, Steel hooks, GI saddle clamps and other petty materials etc.,where necessary including painting as per PWD General Specifications Earthing earth rod 20 mm dia for providing earth connections upto line earth with G.I.Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end.The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall beerected in ground upto complete lengthvertically:- GI Earth rod 20 mm dia., 3 mtr. Long |
| 9 | Making foundation with a set of four foundation bolts for greater rigidity. TheFoundation shall be erected over cement concrete M20 of given size 609 X 609 X1076mm. |
| 10 | Taking out existing CC interlocking paver blocks from footpath/ central verge/pavement,including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 11 | Dismantling concrete Lime concrete, cement concrete of 1:6:12 or leaner mix |
| 12 | Cement concrete 1:8:16 With stone aggregates 20mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 13 | Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type |
| 14 | Providing and Laying Out Door precast designer chequered tiles of any size & anyshape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), jointsgrouted with white cement slurry containing pigment to match the shade complete in allrespect as per specifications and to the entire satisfaction of engineer-in-charge. |
| 15 | Providing and laying factory made rubber moulded smooth finish cement concrete KerbM-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications |
| 16 | Recovery of Tiles Please Enable Macros to View BoQ information |
