|
| 1 | BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : MAINTENANCE OF CERTAIN B/R ITEMS AND PETTY REPAIRS INCLUDING JOINERY, FLOORING, SANITRY ITEMS & PERIODICAL SERVICES TO MES INSTALLATIONS OF SECTOR I TO XI AT AGE CHARDUAR UNDER GE (N) TEZPUR Contract No : GE(N)/TEZ/ OF 2026-2027 (File No. 8261/E8) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required. Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words) |
| 2 | M&L for rendering 15mm thick on fair faces of brick work or on concrete surfaces in CM 1:6 finished fair and smooth without using extra cement including taking down old unserviceable plaster complete all as specified and directed. |
| 3 | M&L for rendering 15mm thick on otherthan fair faces of brick work or on concrete surfaces in CM 1:4 finished even and smooth without using extra cement including taking down old unserviceable plaster complete all as specified and directed. |
| 4 | M&L, 10 mm thick cement plaster in cement mortar 1:4 on ceiling of concrete surfaces and finished the surface even and smooth without using extra cement including taking down old unserviceable plaster complete all as specified and directed. |
| 5 | M&L for preparation the new plastered surface of wall including cornices etc and applying two coats of cement base paint (any colour as approved) over a coat of primer complete all as specified and directed. |
| 6 | Complete removal of existing treatment from walls, preparation the surface of wall including cornices plasters etc and applying two coats of cement base paint (any colour as approved) over a coat of primer on old treated surface of wall including preparation of surface complete all as specified and directed. |
| 7 | M&L for preparing new Plastered surfaces of walls and applying two coats acrylic-based distemper of shade as approved by GE over a coat of primer on surfaces of wall as per the manufacturer's instructions complete all as specified and directed. |
| 8 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats acrylic based distemper of shade as approved by GE over a coat of primer on surfaces of wall as per the manufacturer's instructions complete all as specified and directed. |
| 9 | M&L for preparation of old or previously undecorated surface of wall with complete removal and wash down etc. and applying three coats of white wash on wall complete all as specified and directed. |
| 10 | M&L for preparation of old or previously undecorated surface of ceiling and applying two coats of white wash on wall complete all as specified and directed. |
| 11 | M&L for applying 3mm thick wall care putty on walls complete all as specified and directed. |
| 12 | Preparation of old painted surface of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 13 | Preparation of old painted surface of steel or iron work of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 15 | M&L glazed ceramic joint free coloured tiles in vertical surfaces 450x300x7mm thick, set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed. |
| 16 | M&L coloured Non Skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed. |
| 17 | M&L for non skid ceramic (coloured) jointless tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed CM 1:4 complete all as specified and directed. |
| 18 | M&L for providing machine cut polished Kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in floors or horizontal surfaces complete all as specified and directed. |
| 19 | M&L for Kota stone 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed in vertical surfaces complete all as specified and directed. |
| 20 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thick above or below ground level complete all as specified and directed |
| 21 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth using extra cement complete all as specified and directed. |
| 22 | M&L for 25mm thick PCC 1:2:4 type B-2 using 20mm graded stone aggregate as in floor surface for receving tiles etc. complete all as specified and directed. |
| 23 | M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment,glossy finished type over 15mm thick screed in CM(1:4) complete all as specified and directed. |
| 24 | M&L for PCC 1:4:8 type D2 using 40mm graded crushed stone aggregates as in foundation filling and mass complete all as specified and directed. |
| 25 | M&L for brick work with modular fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed. |
| 26 | M&L for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregates as in foundation filling and mass concrete complete all as specified and directed. |
| 27 | Hard core of gauge n exc 63mm ( using broken stone or boulder ), depoisted, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 28 | M&L for 100mm thick PCC 1:4:8 Type D-2 (using 40mm graded crushed stone aggregates) as in sub base of floor complete all as specified and directed. |
| 29 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness &size/shape, made by table vibratory method using PU mould, laid in required colour &pattern over and including 30mm thick comnpacted bed of fine sand, compcting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plkate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per specified and directed. |
| 30 | Taking down chowkhat or farme with shutter (without taking off shutter from the frame) area n exc 1.50 Sqm each and removing from site complete all as specified and directed. |
| 31 | Taking down chowkhat or farme with shutter (without taking off shutter from the frame) area exc 1.50 Sqm but not exc. 4 Sqm each and removing from site complete all as specified and directed. |
| 32 | S&F 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 33 | S&F 35mm thick Ist class hard wood galzed & skeleton shutters open rebated, prepared to receive glass, guaze etc. divided into square with plain chamfered or rounded, mitred and rebated sash bar any numbers sizes of members of shutters as specified in SSR Part-I section 8 of clause 8.23 (a) complete all as specified and directed. |
| 34 | S&F for 30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 35 | S&F 30mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divided into squares (with sash bar), edges of plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed. |
| 36 | S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane glazed with putty or wooden beads complete all as specified and directed. |
| 37 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed, complete all as specified and directed. |
| 38 | M&L for preparation of previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetc enamel paint over a coat of pink primer complete all as specified and directed. |
| 39 | S&F solid PVC door frame of size 50 x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube etc complete all as specified and directed. |
| 40 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed.. |
| 41 | S&F in repair for stainless steel butt hinges medium weight 100mm size complete all as specified and directed. |
| 42 | S&F repair 150 mm size alumium alloy handle, fabricated type extruded section complete all as specified and directed. |
| 43 | S&F repair 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 44 | S&F repair 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed. |
| 45 | S&F in repairs vitreous china squatting pan \\"Orissa\\" pattern size 580mmx440mm white with integral foot rests including connection to trap, and to flushing pipe, anti syphonage pipe, etc complete making good to floors and complete all as specified and as directed. |
| 46 | S&F as in repair PVC valve less, syphonic action type flushing cistern 10 lit capacity, low level white with inlet, ball valve , float and handle including brackets and flush pipe fixed etc complete all as specified and as directed. |
| 47 | S&F in repair viterous china Wash Hand Basin white flat black type of size 550x400mm including cutting for and pinning in ends of brackets and fixing in walls including 32mm dia chromium plated waste coupling, PVC waste pipe MS brackets complete all as specified and directed. |
| 48 | S&F GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking up or down of existing steel tubing and connections complete all as specified and directed. |
| 49 | S&F GI tubing 20mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking up or down of existing steel tubing and connections complete all as specified and directed. |
| 50 | Supply and fixed in repair 15mm bore chromium plated bib taps, cast copper alloy, screwed down, with crutch or butterfly handle, screwed for steel pipe or brass ferrule complete all as specified and directed. |
| 51 | Supply and fixed in repair 15mm bore chromium plated stop valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe for unions complete all as specified and directed. |
| 52 | Supply and fixed in repair 15mm bore stop valves, chromium plated, with Long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with capstan head, screwed for steel pipe or brass ferrule complete all as specified and directed. |
| 53 | M&L for fair cutting not exc 10 cm width or gorth on exposed surfaces of brickwork such as in splays chamfers etc including rubbed finish and waste complete all as specified and directed |
| 54 | S&F repair 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall incl MS holding clamps complete all as specified and directed. |
| 55 | S&F repair 110mm bore PVC (SWR) bends,any radius with access door complete all as specified and directed. |
| 56 | M&L for water proofing treatment to roof/ floor with the following course of treatment/ specification complete all as specified and directed :-(i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix), mixed with WPC as per manufacturer’s instruction laid in slope 1:20 towards spouts including coveting corners. (ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as per manufacturer’s instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed with acrylic based polymer modified cementious compound @ 0.253 kg /sqm. This layer shall be allowed to air cured for 4 hrs. (iv) Applying 2nd layer of slurry @ 0.242 kg/sqm mixed with acrylic based polymer modified cementious compound @ 0.126 kg/sq. This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs.(v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 3mm Third layer of APP modified polymeric membrane thick (Min) polymeric water proofing membrane weight not less than 3 Kg/Sqm.(viii) After WPT work, slab/Roof shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists. (ix) Sunken portion shall be filled with lean concrete 1:4:8 type D2.(x) Including demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) including cleaning washing down etc. complete all as specified and directed. |
| 57 | Supply only integral water proofing compound, ISI marked complete all as specified and directed. |
| 58 | Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings including ridges, hips, valleys and flashings complete, all as specified and directed. |
| 59 | S&F pre-painted colored trapezoidal profiled Galvalume/ aluminum zinc coating GI based corrugated steel sheet with min 0.50 mm TCT confirmin to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating 550 Mpa yield stress as per AS-1397) as in roof covering/ cladding to wall fixed with self tapping screws colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals) complete, all as specified and directed. |
| 60 | S&F pre-painted colored plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirmin to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating 550 Mpa yield stress as per AS-1397), as in roof covering/ cladding to wall fixed with self tapping screws colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals) complete, all as specified and directed. |
| 61 | Dismantlibng wrought iron or mild steel work of any description not otherwise provided for complete, all as specified and directed. |
| 62 | S&F for rolled section as in main & cross beams, hip & jack rafters; purlins where connecting to common rafters & running rails & guides for sliding doors; fixed with angles cleats or other connecting plates confirming to Fe-410W (Gde-E-250) complete, all as specified and directed. |
| 63 | S&F MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint complete, all as specified and directed. |
| 64 | Dismantling of timber scantling 40sqcm and over in section in any position as in unframed work all as specified. |
| 65 | S&F 2nd class hardwood scantling clean swan as in purlins rafters including wooden cleats etc complete, all as specified and directed. |
| 66 | Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 67 | M&L of anodized aluminium snap grid size 605x605mm of frame work for false ceiling complete all as specified and directed. |
| 68 | S&F Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/ Aluminium framework with screws complete all as specified and directed |
| 69 | S&F for mild steel work as in small articles of required size as in hold fasts, angle cleats, MS grating, clamps, hooks, straps, support or stays for rain water pipes incl bolts if required and similar small articles conforming Gde Fe 410-0 complete all as specified and directed. |
| 70 | S& F in repairs Mild steel 150mm, ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed. |
| 71 | S&F in repair 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall incl MS holding clamps complete all as specified and directed. |
| 72 | S&F in repair 110mm bore PVC (SWR) bends,any radius with access door complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
