|
| 1 | Demolition of concrete (Un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 2 | Demolition of cement concrete (Un reinforced) of any description of any description and in any position not otherwise specifically provided for |
| 3 | Demoliton of precast cement concrete block walling, precast concrete articles etc complete. |
| 4 | M & L for precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in CM 1:6 complete and including demolition work all as specified and directed . |
| 5 | ditto item no 4 above but in except block |
| 6 | Taking down cement or cement plaster, pointing any description on bricks or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 7 | M&L for 15 mm thick rendering on brick or concrete surfaces in CM 1:4 including finishing the surface even and smooth without using extra cement all as specified and directed |
| 8 | M&L for 15 mm thick rendering on brick or concrete surfaces in CM 1:6 including finishing the surface even and smooth without using extra cement all as specified and directed |
| 9 | M&L for preparation of new plastered or un plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed. |
| 10 | Materila and labour for preparing of new plastered surfaces of walls and applying Three coat of white wash on walls including cornices etc complete all as specified and directed |
| 11 | Preparing of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescent salt and treating oil and greasy spots and applying one coat of white wash on walls including cornices etc complete all as specified and directed |
| 12 | M&L for two coats of exterior emulsion paint over a coat of primer on newly plastered surface of wall complete all as specified and as directed. |
| 13 | M&L for two coats of exterior emulsion paint over a coat of primer after complete removal of existing treatement complete all as specified and as directed. |
| 14 | M & L for providing cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate, as in coping ,bed blocks including necessary form work complete all as specified and directed |
| 15 | M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain complete all as specified and directed. |
| 16 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc. |
| 17 | Add or deduct for each 25mm girth or part thereof over or under 30 cm inner girth |
| 18 | M&L for rubber moulded Exterior grade joint less coloured tiles 10 mm thick ,area exc 0.06 sqm but n.exc 0.18 sqm with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 15mm thick screed bed in CM 1:6 and taking down of existing completee all as specified and as directed. |
| 19 | Granite (of any type/ colour) work (table rubbed and polished) 18 to 20mm thick in steps jambs,pillars, window cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete. |
| 20 | M & L in repair glazed ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed. |
| 21 | M&L for 75 mm thick PCC 1:3:6 type -C2 using 40 mm graded stone aggregate as in floors etc, finished rough to receive floor finishes complete all as specified and directed. |
| 22 | M & L for chequered cement concrete coloured tiles 30 cm x 30 cm x 20 mm thick , with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 23 | Dismantling of interlocking paver block laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed |
| 24 | M&L for refixing of interlocking paver blocks with grey cement and pigment complete all as specified and directed. |
| 25 | S & F machine pressed rubber moulded coloured precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade all as specified and directed. |
| 26 | M & L for 40 mm thick PCC 1:2:4 type B-1 using 20mm gradd stone aggregate as in floors for levelling course on existing cleaned surface etc for laying paver blocks, chequered tiles etc finished rough to receive floor finishes complete all as specified and directed. |
| 27 | M & L for sand filling under floors or in foundation including watering and consolidation. |
| 28 | S & F Framed work confirming to Fe 290 (Gde -E-165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 29 | M & L for 75 mm thick cement concrete type C2, 1:3:6 (40mm graded aggregate) as in floors and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 30 | Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed. |
| 31 | Demolition of concrete (Reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 32 | M&L for MS TMT bars10mm dia and over cut to Length bent to shape required including cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips complete all as specified and directed. |
| 33 | M & L for providing pre cast cement concrete (reinforced)Type B1, 1 : 2 : 4 (20mm graded aggregate) set in cement mortar 1 : 6, in landings, for RCC cover slabs for drains cover/RCC Post with plain faces complete all as specified and directed. |
| 34 | M&L Rendering 15 mm thick in two layers consisting of first layer 5mm in CM 1:6 and top layer 10mm thick in CM (1:4) plastering on stone masonry surface and rendering is to be finished even and smooth w/o using extra cement. |
| 35 | Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 36 | M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 37 | M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed |
| 38 | Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed. |
| 39 | M&L for raised pointing to random polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed. |
| 40 | S&F 75mm bore PVC(SWR) pipes single socketed for weep holes , in any length as in weep holes complete all as specified and directed. |
| 41 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 42 | Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in Hard/dense soil complete all as specified and directed. |
| 43 | Returning, filling in, earth including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed. |
| 44 | Removing excavated material n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point. |
| 45 | Dismantling posts or struts (wood, steel or R.C.C.) any section, in natural ground including taking out embedded portion and making good disturbed ground |
| 46 | Dismantling fencing wire mesh any type. |
| 47 | M&L for MS round bars (Fe-410-W (Gde E-250) quality A or Fe-290 (Gde-E-165) 10mm dia and over cut to Length bent to shape required incl cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips . |
| 48 | Supply only Chain link mild steel galvanised fencing any size including line wire straining boldts etc rails & binding wire complete. |
| 49 | Fixing only chain link MS galvanised fencing any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, including taking down existing complete all as specified and directed. |
| 50 | S&F mild steel in Bands,straps,hook,pintle hinges staples,hand made sliding bols wind ties for roof including securing bolts, posts and struts in fencing including cuttingtop to shape as directed, drilling, holes, notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting or riveting etc and similar work confirming to Fe 290 Gde E-165. |
| 51 | ditto item no 52 above but fixing only . |
| 52 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10 cm long and 16 to 20mm diameter of neck |
| 53 | Dismantling wrought iron or mild steel work of any description not otherwise proviceded for |
| 54 | S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted, or forged into spikes ,framed gurard bars barred iron doors ladders framed balusters walk ways ,railings ,framework of water tanks and similar work conforming to Fe 290 Gde -E-165. |
| 55 | ditto item no 54 above but fixing only . |
| 56 | M & L for Cement Concrete Type C-2, 1 : 3 : 6 (40mm graded aggregate) as in foundation filling and mass concrete or for embedding of posts etc |
| 57 | M & L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surface of any description exc. 10 cm width or girth including preparation of new steel surfaces, complete all as specified and directed. |
| 58 | All as Item No 59 above but one coat of synthetic enamel paint on old steel surface including preparation of surfaces complete all as specified and directed. |
| 59 | M & L two coats of synthetic enamel paint over a coat of red oxide primer on steel surface of any description n. exc. 10 cm width or girth when unconnected with other painting or when painted in a different tint including preparation of new steel surfaces, complete all as specified and directed. |
| 60 | M & L for one coats of synthetic enamel paint over a old painted concrete surface of any description exc. 10 cm width or girth including preparation of concrete surfaces, complete all as specified and directed. |
| 61 | S & F in repair galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed |
| 62 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregates as in post holes for embedding the post all as specified and directed. Note :- PCC shall be filled in alternate post and corner post only upto depth of post holes and measured accordingly for payment . |
| 63 | Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts,with groove to receve Precast concrete wall straining or terminal posts, struts etc. for fencing, average sectional area exc 100 and n exc 250 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed. |
| 64 | Providing precast cement concrete wall ,louvres and jallies, 40 to 45 mm thick type B0 (12.5 mm graded aggregate) (mea sured solid), including all mould- ings but excluding frame set in cement mortar 1:4. |
| 65 | M & L for precast concrete Kerb Stones factory made as in repairs of type B1, 1 : 2 : 4 (20mm graded stone aggregate) 10 to 15 cm thick and and setting in CM 1 : 6 including taking out existing broken stone with necessary excavation etc complete all as specified and directed. Please Enable Macros to View BoQ information |
