|
| 1 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. complete all as specified and directed by Engr-in-Charge. |
| 2 | S&F solid PVC wall panelling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing in any position with screws and including corner mould and Joint Fillets. complete and as directed by Engineer-in-Charge |
| 3 | S&F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing. |
| 4 | M&L in repair for 18 mm Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work |
| 5 | M/L 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions |
| 6 | S&F for Continuous (piano) hinges, Stainless steel, bright finish or electrogalvanised ,Width of flap (when open), 30 mm . Complete all as specified and directed |
| 7 | S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed |
| 8 | S&F for Extruded Aluminium alloy handles,fabricated type, anodised 125 mm long,(ISI Marked) all as specified and directed. |
| 9 | S&F in repair to 18 mm thick solid WPC board both side prelam for cabinet boxes & shutter , cup boards, drawer, etc with shelf and shutter incl lipping to edges of exposed surface incl provn of fixing arrangement.Complete all as specified and directed |
| 10 | S & F of Heavy Duty telescopic channel of 20-22 inch. |
| 11 | Providing & fixing false ceiling with semi perforated 12mm thick micro tengular edged GRG false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended fromceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshapelevel adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. |
| 12 | S&F in repairs for stainless steel non magnetic curtain rod 25 mm dia with fixing brackets and decorative type knobs both side of each rod.Note: - Measurement will be taken between end point of knobs” |
| 13 | S & F in repairs to Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 oto 1000 mm in width and of weight between 61 to 80 Kg. |
| 14 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each. |
| 15 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each. |
| 16 | Refixing of shutters in same opening of any description after eassing and adjusting and necessary repairs as n exc 1.5 qm |
| 17 | Refixing of shutters in same opening of any description after eassing and adjusting and necessary repairs as n exc 1 sqm but n exc 2.0 sqm |
| 18 | S&F Powder Coated of any colour (minimum thickness of powder coating 50 micron), Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed. |
| 19 | S&F Powder coated of any colour (minimum thickness of powder coating 50 micron), aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges,anodised aluminium snap beading, screws etc. complete all as specified. |
| 20 | S & F for Glazing with plain sheet glass, ordinary quality, 5.5 mm thick and glazing with oil putty or aluminium or PVC beading in squares exceeding 0.5 Sq.m in each pane. |
| 21 | S&F in repair Venetian Blinds of superior quality fabric (as approved by the AGE (I)), horizontal/vertical type, with 100mm wide louvers, including supplying and fixing of all arrangements required for proper functioning of the blinds such as aluminium top & bottom guide rails, rollers, chain etc., including taking down of old unserviceable venetian blinds, complete all as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
