|
| 1 | CIVIL WORK |
| 2 | Earth work in excavation in foundation in Hard soil including hard moorum, with all leads and lifts including dressing and leveling the bed and depositing the excavated earth at place away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge. |
| 3 | Providing Sand filling in foundation of structures/ Behind abutment wing walls & return wall as per approved drawing and technical specifications as per Section 300 ,2100 & 2200 of MoSRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 4 | Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm (1 1/2inch) 0 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading,cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. |
| 5 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 percent ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position complete as per direction of Engineer-In -Charge. A.( FOUNDATION & FOOTING ) |
| 6 | B)Column superstructure i)Above Plinth |
| 7 | ii)Ist floor |
| 8 | C)Plinth beam |
| 9 | D)Lintel Beam |
| 10 | E)Roof beam |
| 11 | F)Chajja |
| 12 | G)Roof slab |
| 13 | Supplying, Cutting, Straightening coiled or bent up M.S. rods or Tor steel of SAIL(HYSD Fe-500) welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer-in-charge All reinforcement steel and structural steel shall be procured from primary producers of steel-SAIL/RINL/TATA/JINDAL(Panther)/SHYAM STEEL. |
| 14 | Brickwork with Fly ash bricks in cement mortar (1:6) in F&P (25cm x 11cm x 8 cm) having minimum crushing strength not less than 75 kg.per.sq.cm. including splays cutting, circular moulding, chamfering, corbelling and similar such type of woks with all necessary projections watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost and conveyance of all materials, labour with T&P required for the work and royalties etc. complete in all respect as per direction of Engineer in charge. |
| 15 | Brickwork with Fly ash bricks in cement mortar (1:6) in Superstructure (23cm x 11cm x 8 cm) having minimum crushing strength not less than 75 kg.per.sq.cm. including splays cutting, circular moulding, chamfering, corbelling and similar such type of woks with all necessary projections watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost and conveyance of all materials, labour with T&P required for the work and royalties etc. complete in all respect as per direction of Engineer in charge. a)Ground floor |
| 16 | b)Ist floor |
| 17 | 12mm (1/2 inch) thick cement plaster in cement mortar (1:6) finished smooth to brick walls after raking out the joint including watering and curing for seven days with cost and conveyance of all materials and labour with T& P required for the work and royalities etc. complete in all respect as per direction of Engineer in charge. a)Outside Plaster |
| 18 | Ist floor |
| 19 | 16mm (5/8 inch) thick cement plaster (1:6) finished smooth to inside of 9/10 thick brick walls after raking out the joint including watering, curing for seven days with cost and conveyance of all materials and labour with T&P required for the work and royalities etc. complete in all respect as per direction of Engineer in charge. |
| 20 | 6mm thick cement plaster (1:4) finished smooth to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment including watering, curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with royalities etc. complete in all respect as per direction of Engineer in charge. |
| 21 | Cement concrete of proportion(1:2:4) with 12mm size hard black crusher broken granite chips of approved quality from approved quarry including hoisting and laying concrete watering and curing, finished the exposed surface smooth including cost, conveyance, of, royalties of all materials etc. complete in all respects as per direction of Engineer in charge. |
| 22 | Supplying, fitting , fixing of Vetrified tiles in floors tread or steps and landing on 20mm thick bed of cement mortar 1:4(1cement: 4 Sand ) jointed with neat cement slurry mixed with pigments to match the shades or the tiles including rubbing and polishing etc.,complete as per direction of Engineer-in-charge. |
| 23 | Supplying, fitting and fixing Vitrified tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades or the tiles including rubbing and polishing etc.,complete as per direction of Engineer-in-charge |
| 24 | Priming one coat to wall surface with any approved shade(Water bound) to outside walls including cost, conveyance, and of of all materials and with all labour and T&P etc.,complete as per direction of Engineer-in-charge. a)Ground floor |
| 25 | b)Ist floor |
| 26 | Finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials of, labour T&P etc complete as per direction of Engineer-in-charge |
| 27 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved made and shade including sand papering,applying putty wherever necessary & cost of scaffolding staging charges with cost,conveyance,of of all materials cost of all labour,T&P etc.,complete as per the direction of the Engineer-in-charge. |
| 28 | Finishing the outside wall with weather coat painting two coats with any approved paint over a coat of priming including cost of primer and paint sand papering polishing the surface with cost, conveyance, of, of all materials and labour, with T&P required for the work etc., complete as per the direction of the Engineer-in-charge. a)Ground floor |
| 29 | b)Ist floor |
| 30 | Supplying fitting and fixing of M.S grill for doors and windows approved specification and of approved size materials and design including cost and conveyance of all material and labour royality,of etc.,complete in all respect and as per direction of Engineer –in-charge. a)collapsible Gate |
| 31 | a)Window |
| 32 | Providing,fixing of ISI marked 35mm thick flush door shutters confirming to IS:2202 (Part 1) decorative type core ofblock board construction with frame of Ist class hard wood and well matched teak the tree ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixing etc.,complete as per direction of Engineer –in-charge |
| 33 | Priming one coat to window and door grills,ventilators including cost, conveyance, of all materials and with all labour and T&P etc.,complete as per direction of Engineer-in-charge. |
| 34 | Painting two coats with any approved synthetic enamel paint over a coat of priming to wood work and iron work including cost of primer and paint sand papering polishing the surface with cost, conveyance, of, of all materials and labour, with T&P required for the work etc., complete |
| 35 | Providing fitting and fixing of Gypsum board with aluminum anodized T section No. 3215 with 2’-0” center to center . L section No.1705 up to 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the aluminum grid 2’-0”x2’-0” suspended from ceiling etc complete. |
| 36 | 2.5cm.(1\\")thick grading concrete (1:2:2) over roof slab using 6mm size crusher broken hard granite chips after chipping and chiseling the same and cleaning the surfaces by wire brushing laid to proper slope finished smooth to receive tarfelt treatment watering and curing including cost,conveyance,of royalties of all materials with all labour and T&P required for the work etc.,complete as per the direction of the Engineer-in-charge. |
| 37 | Supplying, fitting & fixing in position well dressed & well seasoned Sal wood work framed & fixed (Wrought & Put of) in frames of doors and windows including cost of iron work, cutting grooves or holes & mending size where necessary with cost & conveyance, royalties & of of all materials & labour with T&P required for the work etc., complete in all respects in all floors as per the direction of Engineer-in-charge |
| 38 | Supplying, fitting, fixing of window(sliding type)made up aluminum section 151-154,151-155 as windows frame section No.151-155,151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all of labour,T&P etc.,complete as per direction of Engineer-in-charge. |
| 39 | Distempering two coats to the wall surface with any approved shade over a coat of chalk wash including cost of distemper etc., conveyance, of of all materials and labour with T&P required for the work |
| 40 | Cement concrete of proportion(1:2:4) with 12mm size hard black crusher broken granite chips of approved quality from approved quarry including hoisting and laying concrete watering and curing, finished the exposed surface smooth including cost, conveyance, of, royalties of all materials etc. complete in all respects as per the direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
