|
| 1 | Demolishing cement concrete Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) manually / by mechanical means including disposal of materials within 50 metres as specified and directed by Engr -in- Charge. |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material built in cement mortar and disposal of unserviceable material within 50 metres lead as specified and directed by Engr -in- Charge. |
| 3 | Material and Labour for Half brick masonry in Cement mortar (1:4) with non modular fly ash bricks of class designation 10, conforming IS :12894, in super structure above plinth and upto floor V level all as specified and directed by Engr -in- Charge. |
| 4 | Material and Labour for laying cement concrete in sunken floor 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) complete as specified and directed by Engr -in- Charge. |
| 5 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 6 | Supply only integral water proofing compound. |
| 7 | Dismantling tile work in floors and roofs laid in cement mortar ( For thickness of tiles 10 mm to 25 mm) including stacking material within 50 metres lead complete all as specified and directed by Engr -in- Charge. |
| 8 | Material and Labour for laying non skid ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make and colour, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete all as specified and directed by Engr -in- Charge. |
| 9 | Material and Labour for fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make and colours by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick rendering of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and directed by Engr -in- Charge. |
| 10 | Material and Labour for Providing and laying vitrified tiles in different sizes ( size of tiles 600 x 600 mm) ( thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours & , over 20mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg / Sqm including grouting the joint with white cement & matching pigments etc complete all as specified and directed by Engr -in- Charge. |
| 11 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metre lead complete all as specified and directed. |
| 12 | Material and Labour for Rendering 15mm thick in fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth in fine sand complete all as specified and directed by Engr -in- Charge. |
| 13 | Material and Labour for Rendering 12 mm thick in fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth in fine sand complete all as specified and directed by Engr -in- Charge. |
| 14 | Material and Labour for Rendering 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on ceiling surface finished with a floating coat of neat cement and thick coat of lime wash on top of ceiling when dry for bearing of RCC slabs and beams complete all as specified and directed by Engr-in-charge. |
| 15 | Material and Labour for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour with two coats on new work complete, as per manufacturer's specification over including 2mm thick internal wall care putty finish complete all as specified and directed by Engr-in-charge. |
| 16 | Material and Labour for Finishing wall New work ( Two coats applied @ 1.67 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm with 100 % premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted ) with silicon additives complete all as specified and directed by Engr-in-charge. |
| 17 | Material and Labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-charge. |
| 18 | Dismantling 15 to 40 mm dia G.I. pipe Internal Work- Exposed on wall including stacking of dismantled pipes (within 50 metres lead) complete all as specified and directed by Engr-in-charge. |
| 19 | Supply and Fixing of G.I. Pipes 15 mm dia nominal bore complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete all as specified and directed by Engr-in-charge. |
| 20 | Supply and Fixing of G.I. Pipes 20 mm dia nominal bore complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete all as specified and directed by Engr-in-charge. |
| 21 | Supply and Fixing in repairs White vitreous china water closet squatting pan Orissa pattern W.C Pan of size 580x440 mm (Indian type) along with \\"S\\" or \\"P\\" trap 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c debris, complete all as specified and directed by Engr-in-charge. |
| 22 | Supply and Fixing in repairs white vitreous china pedestal type W.C. pan with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed by Engr-in-charge. |
| 23 | Supply and Fixing in repairs trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS - 3989 complete all as specified and directed by Engr-in-charge. |
| 24 | Supply and Fix in repairs white vitreous flat back wash basin of size 550 x 400mm with CI brackets including 15mm CP brass pillar tap, 32mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and directed by Engr-in-charge. |
| 25 | Supply and Fixing in repairs of C.P. brass bib cock 15 mm nominal bore of approved quality conforming to IS:8931 complete all as specified and directed by Engr-in-charge. |
| 26 | Supply and Fixing in repairs of C.P. Brass stop cock (concealed) 15 mm dia long shank screwed both side for iron pipe or for union and fixed complete all as specified and directed by Engr-in-charge. |
| 27 | Supply and Fixing of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified by Engr-in-charge. |
| 28 | Supply and Fixing in repairs mirror of superior glass (of approved quality) and of Rectangular shape & 453x357 mm (outer dimensions) size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing complete all as specified and directed by Engr-in-charge. |
| 29 | Supply and Fixing in repairs of PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality and colour 600mm long with total length 645 mm, 78 mm wide, effective ht 88 mm and weighing not less than 190 gms complete all as specified and directed by Engr-in-charge. |
| 30 | Supply and Fixing in repairs of PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms all as specified and directed by Engineer-in-charge. |
| 31 | Supply and Fixing in repairs of uplasticised PVC connection pipe with brass unions 45 cm length and 15 mm dia nominal bore complete all as specified and directed by Engineer-in-charge. |
| 32 | Dismantling 75 to 80mm dia CI or asbestos rain water pipe with fittings and clamps including stacking the materials within 50 metres lead complete all as specified and directed by Engr-in-charge. |
| 33 | Supply and Fixing of unplasticised Rigid Single socketed 75mm dia PVC rain water pipes on wall face conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-charge. |
| 34 | Supply and Fixing of unplasticised Rigid Single socketed 110mm dia PVC rain water pipes on wall face conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-charge. |
| 35 | Supply and Fixing of 110 mm dia Coupler on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-charge. |
| 36 | Supply and Fixing of 110 mm dia bend on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-charge. |
| 37 | Supply and Fixing of shoe(Plain) of 110 mm dia on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-charge. |
| 38 | Supply and Fixing of single tee with door 75x75x75mm on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-charge. |
| 39 | Supply and Fixing of single tee with door 110x110x110mm on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-charge. |
| 40 | Supply and Fixing of 75mm dia bend on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-charge. |
| 41 | Dismantling of stone slab in any description or thickness, laid bedded jointed in any mortar. |
| 42 | Material and labour for laying of Granite(of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade |
| 43 | Complete removal of vegetables uprooting of trees plants on the surface of buildings roofs wall etc and applying pesticides as per manufacturing instructions complete all as specified and directed by Engr -in -charge Please Enable Macros to View BoQ information |
