|
| 1 | B & R Division Items |
| 2 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris complete all as specified and as directed. |
| 3 | Demolition of cement concrete ( unreinforced ) of any desription and in any positon not othrwise specifically provided complete all as specified and directed. |
| 4 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for. |
| 5 | Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed. |
| 6 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 8 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness as in roof coverings, chajja, wall clading and the like complete all as specified and directed |
| 9 | Demolition and breaking up 100 / 110mm bore drain pipes salt glazed ware, AC or Reinforced concrete set in cement mortar complete all as specified and directed |
| 10 | Demolition and breaking up 150mm bore drain pipes salt glazed ware, PVC /AC or Reinforced concrete set in cement mortar complete all as specified and directed |
| 11 | Demolition of 75mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar or PVC drain pipes and taking out of trenches, if required and as directed. |
| 12 | Taking up or down 15mm bore steel water tubing and connections from any location / position including disposing off, etc. complete all as specified and as directed. |
| 13 | Taking up or down 20mm bore steel water tubing and connections from any location / position including disposing off, etc. complete all as specified and as directed. |
| 14 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soil complete all as specified & directed. |
| 15 | M&L for sand filling under floors or in foundations or under paver block including watering, ramming and consolidation complete all as specified and as directed. |
| 16 | M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in sub-bases for floors, complete all as specified and as directed. |
| 17 | M&L cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and necessary form work complete all as specified. |
| 18 | M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded aggregate as in plinth protections and finished the surface even & smooth all as specified and directed |
| 19 | M & L Forming construction joints 30mm deep X 10mm wide filled with sealing compound Grade- B complete all as specified and directed. |
| 20 | M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates as in surface channel and drain complete all as specified and directed |
| 21 | M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed |
| 22 | M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in cover slab and set in cement mortar 1:6 complete all as specified and directed |
| 23 | M&L for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 24 | M&L for TMT bar 6mm to 8mm dia cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 25 | M&L brick work with sub class ‘B’ brick straight or curved on plan exe. 6 meters mean redius built in cement mortar 1:6 complete all as specified and as directed. |
| 26 | M&L brick work with sub class ‘B’ bricks or locally available best quality old size bricks, straight or curved on plan to any radius in half brick wall built in cement mortar 1:4 complete all as specified and as directed. |
| 27 | Material and labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) on wall surface and finishing even and fair complete all as specified and directed. |
| 28 | M&L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) for receiving wall tiles complete all as specified and directed. |
| 29 | Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed |
| 30 | M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 31 | Material and labour for laying anti-skid heavy duty vitrified outdoor tiles of size 300 x 300 x 25 mm thick set & jointed and pointed in neat cement slurry in floor with white or coloured cement and pigment complete all as specified and directed. |
| 32 | Material and labour for laying factory made coloured glossy machine pressed rubber moulded chequered cement concrete tiles 300mm x 300mm x 25 mm thick set & jointed and pointed in neat cement slurry in floor with white or coloured cement and pigment complete all as specified and directed. |
| 33 | M&L for factory made machine pressed precast concrete 80mm thick rubber moulded, designer, interlocking paver blocks made of M-40 design mix concrete of approved design and shape conforming to IS: 15658-2006 laying over sand 50mm thick and filling the joints with sand including all necessary cutting, notching etc complete all as specified and as directedNote: Sand shall be measured sepreatly in respective items. |
| 34 | M&L for non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed |
| 35 | M & L for Glazed ceramic tiles in vertical surface 450mm X 300mm X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed |
| 36 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed |
| 37 | Supply & Fix Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, railings, and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed |
| 38 | S&F in repair vitreous china Wash hand basin, white , flat back size 550x400 mm excel tabs but incl brackets, 32mm bore waste coupling complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F in repair vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to 100mm bore 'P' or 'S' trap, and flushing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified and directed. |
| 40 | S&F in repairs, vitreous china wash down water closet pan (pedestal pattern) white including connection to drain (or outgoing pipe) and to flush pipe, antishonage pipe and Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed. |
| 41 | S&F in repairs of vitreous china bowl urinals flat back Half stall type of size 590x390x375mm(minimum) complete complete all as specified and as directed. |
| 42 | S&F in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 43 | S&F in repair low level PVC valveless syphonic action type, flushing cistern 10 litres capacity light coloured with inlet ball valve float and handle including PVC fixtures, flush pipe etc complete all as specified and as directed. |
| 44 | S&F in repair for single piece vitereous china wash down water closet pan of padestal pattern wihite with P or S trap including plastic water closet seat cover , white , clouse pattern with flat bottam , and cover and mild steel chromium plated or aluminised hinging device jointed in white cement complete all as specified and directed.Make : Hindware Cat part No 20125 or equivalent make as approved list |
| 45 | S&F in repair of 450mm long 15mm dia of PVC connection with PTMT nuts complete all as specified and as directed. |
| 46 | S&F and fixed in repair 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 47 | S&F in repair 15mm Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 48 | S&F in repair concealed stop valve brass CP 15mm bore fancy type screwed both end for iron pipe complete all as specified and directed. |
| 49 | Supply and fixed in repairs 15 mm bore Angular Stop cock, chromium plated, screwed down, high pressure, screwed for 15mm bore GI pipe or for union complete all as specified and as directed. |
| 50 | S&F in repairs, 15mm bore Bib tap standard of PTMT(Minimum weight 90 gms) any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. |
| 51 | S&F in repair swivel shower of PTMT with arm 15mm size 195mm long bend of 45 degree fixed in 15mm bore of pipe complete all as specified and directed. |
| 52 | S&F in repair CP towel Rail 600mm long \\"D\\" type 20mm dia complete all as specified and directed. |
| 53 | S & Fixed in repairs of chromium plated Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed. |
| 54 | S&F in repairs Hand shower health faucet ABS body with wall hook and 1 meter long easy flex tube in chrome finish hose pipe for EWC including hinges with complete fitting : Make Jaquar (ALD -579) or equivalent as approved list. |
| 55 | Supply and fix in repair Toilet paper holder with flat recessed type stainless steel fixed to wall with chromium plated brass screws all as specified and directed. |
| 56 | Supply and fix in repair chromium plated soap dish, chromium plated standard quality fixed to wall with chromium plated brass screws all as specified and directed. |
| 57 | S&F in repair 600X450mm looking mirror of selected quality glass mounted on 9mm thick of commercial plywood and PVC moulding frame fancy type complete all as specified and directed. |
| 58 | S&F in repairs for 100mm dia grating round with waste hole of PTMT (Min wt 40 gms) all as specified and as directed. |
| 59 | S&F in repairs for 125mm dia grating round with waste hole of PTMT (Min wt 40 gms) all as specified and as directed |
| 60 | S&F in repairs for 150mm size grating square of PTMT (Min wt 100 gms) all as specified and as directed. |
| 61 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 62 | S&F PVC (SWR) pipes 150mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 63 | Material and labour for 110 mm bore concrete bed to drain pipes with PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregates including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 64 | Material and labour for 150 mm bore concrete bed to drain pipes with PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregates including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 65 | S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 66 | S&F in repair 150 mm bore PVC (SWR) bends of any radius complete all as specified |
| 67 | S&F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified |
| 68 | S&F in repair 150mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified |
| 69 | S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified |
| 70 | S&F in repairs 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed |
| 71 | S&F in repairs 75mm dia PVC(SWR) vent cowl complete all as specified and as directed |
| 72 | Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed. |
| 73 | Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed. |
| 74 | M&L for cleaning / de-sludging of sewage soakage wells/blocked main holes etc, using mechanical pumps, diesel driven, with fuel, operator, etc. and all necessary tools / plants including loading and carting off the drawn sludge, waste material, scum, spoil water, etc. outside MD land through designated sludge carriers / bio tanks complete all as specified and as directed |
| 75 | M&L for cleaning / de-sludging of septic tanks, using mechanical pumps, diesel driven, with fuel, operator, etc. and all necessary tools / plants including loading and carting off the drawn sludge, waste material, scum, spoil water, etc. outside MD land through designated sludge carriers / bio tanks complete all as specified and as directed. |
| 76 | M&L for cleaning of all blockages of Nahani traps/floor traps/bottle traps, blockages of WC's, Rain water pipes, Rain water spouts at roof level, 100 mm dia CI pipes upto manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes 150 mm to 250 mm internal dia by rodding etc complete all as specified and directed. |
| 77 | Cleaning of sewage lines, 110 to 200mm dia, any type of drain pipes by rodding with flexible sewer rod, cleaning thoroughly from inspection chamber to manholes or from manholes to manholes of any depth, including removal of sludge & other materials and making the sewer line functional all as directed. |
| 78 | Notes for item Nos. 74 to 77:(i) All necessary precautions and all safety measures as per Municipality rules / relevant regulatory guidelines shall be taken by the Contractor in employing his mechanical means and workmen. No person shall be employed in direct contact working in septic tanks, manholes, sewage wells, etc. in foul conditions to prevent any health hazards, etc. and only mechanical means shall be used(ii) The Contractor shall be solely responsible for any mishap to any of labourer deployed and to equipment/machinery/plants/material, etc. brought at site for work and any lapses whatsoever during the execution, (iii) The work shall be executed under the supervision of highly skilled tradesman / supervisor.(iv) Drawn sludge, waste material, scum, spoil water, etc. shall be removed to outside MD land through designated sludge carriers / bio tanks only(v) To avoid any hazard or spreading of any foul gas bleaching powder shall be spread as directed(vi) The rates quoted shall be deemed to be inclusive of the above aspects, and no claims whatsover shall be entertain able at later stages and or during execution |
| 79 | M & L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and directed. |
| 80 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new iron surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surface all as specified Please Enable Macros to View BoQ information |
