|
| 1 | Drilling of 01 No of 125mm dia borewell in collapsible strata conglomerate, boulders, gravel, pebbles, silt, clay, and rock etc formation whatsoever encountered at site. The job envisages construction of Hand Pump Wells of an avg. depth of 60 Mtrs. below ground Level, or till the sufficient discharge of water is available from the bore hole by way of Drilling of 125mm Bore Holes using 115mm ODX method and exploration of underground potable water by tapping sufficient aquifer zones with simultaneously lowering of 125mm M.S/G.I. plain ended pipe duly chamfered and welded. The job includes all charges on account of cost of drilling/ accessories/tools/ attachments/bits/POL's/ consumable/ labour etc with carriage of all materials upto site of work, including cost of suitable casing pipe (ISI marked steel tubes for water wells of hot types finished seamless (HFC) electric automatic fusion welded (HFC) resistance welded in length of 3Mtr with tolerance of + 10cm beveled casing 125mm dia nominal bore with 4.5mm thickness/shoe of adequate hardness. The job also includes development of drilled bore holes with Air Compressor of suitable capacity to clear the tapped water from all suspended impurities.Casing Pipe Make: TATA, JINDAL, SURYA PRAKASH. |
| 2 | ODEX depth |
| 3 | DTH Depth |
| 4 | SITC of Radial / mixed flow ISI marked water/oil cooled and anti-corrosive liquid filled 2.5 HP submersible pump set suitable for 125 MM dia borewell @ Rs 24500/HP. The size of adopter fixed on top of the motor should exceed the top of coupler, for safeguard the coupler. The construction material of motor and pump should match IS: 8034: 2018 and IS: 9283 guideline. The radial flow pump set should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompanied by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for Bore well. The job includes labour part of lowering of riser pipe HDPE/GI excluding the cost of riser pipes but including the cost of steel rope, cables clamps, and nuts bolts etc., jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect as per the direction and approval of the site Engineer. The contractor shall submit the OEM NABL / CPRI / ERDA accredited lab test certificate received from the OEM before execution. Fractions in the pump ratings shall be considered with the predecessor value having a whole number. pump 20 HP/phase supply Head=310mtr Discharge=03LPS Make: KSB/Crompton/Kirloskar. |
| 5 | Providing, covering & cladding of R7 grade insulating materiallike Polyisocryanurate (PIR) along the rising mains to maintain flow at minus 25 degree centigrade. The rates are iclusive of transportation & carriage. Carriage status 95% head load along the forward slope. |
| 6 | Providing and winding of pipe heating cable (Standard make conforming to relevant ISI/ISO/IEEE/IEC or equivalent certification) around the delivery header upto a substantial depth to be decided by the engineer in-charge, as per the site conditions and highly efficient winter friendly hassle free (replaceable) thermal insulation for pump casing below ground level to maintain the inner ambient temperature of the casing between 15-35°C by way of designing, providing and installing sensor operated thermostat of approved brand conforming to relevant ASTM/ISI/ISO/IEEE/ASME/IEC or equivalent/relevant standards, to render the pumping unit operable the year round. The cable shall draw the energy from the SPV/AC supply proposed for the scheme. |
| 7 | Providing & fixing of 1000L 30 MM thick puf insulated water tank (Sintex, Plasto, Vectus, and Penguin). The job sincludes providing and fitting of all mounitngs and fittings like unions, nipples, ball valves, elbows etc |
| 8 | providing and joining, lowering, laying of 40 mm HDPE pipes, PN 16 including all necessary mounting and fittings like nipples, valves, clamps, etc complete in all respect |
| 9 | Fabrication of stand for the puff insulated tank by way prividing, sizing cutting & welding of 5050x4mm (wt density 3 kg/meter)equal angles, size 4'x4'x3' qty 76 RFT |
| 10 | DSITC of MNRE approved make (ALMM) shock proof, Photo Voltaic monocrystalline solar panels for 2.5 kW PV unite with mast, battery, drive, civil works etc plant with cables and wiring, safety equipment including, transportation, carriage, headload etc. complete job in all respects Please Enable Macros to View BoQ information |
