|
| 1 | PHASE -I SCHEDULE 'A' PART-I (BUILDING WORK) |
| 2 | Construction of 01 x Block for 24 x OR's Married Accommodation (Quarters) upto (S+6) multistorey with stilt parking , Lift shaft, electric shaft, staircase, Fire escape stair case ,Lobby, Horizontal Corridors, 25000 Ltr capacity RCC water tank on top of roof for fire fighting, machine room , ramp etc complete all as specified, shown on drawing and directed. |
| 3 | Total amount of SCHEDULE 'A' Part - II A (INTERNAL WATER SUPPLY)(For details see Sch 'A' in PDF folder) |
| 4 | SCHEDULE 'A' Part - II B (INTERNAL WATER SUPPLY) |
| 5 | S & F 15 mm bore two way bib cock with wall flange cast copper alloy , fancy type , chromium plated, screwed for for GI/ iron pipe or for brass ferrule including flange and fixed complete all as specified and directed. |
| 6 | S&F 15 mm dia bore Brass chromium plated wash hand basin mixer central hole for making (HOT & COLD) water fixed as per manufacturers manual along with accessories with long shunk and cup washers, screwed both ends for GI/ iron pipe or for brass ferrule including flange complete all as specified and directed. |
| 7 | S&F 15 mm dia bore Brass chromium plated wall mixture 2 in 1 system (HOT & COLD) with wall flange and two way suitable for GI/ iron pipe or for brass ferrule including flange and fittings including three joints to GI pipe or unions and plugging and screwing to walls , inluding L bend for mixing hot or cold for shower connection etc all as specified and directed. |
| 8 | S & F 15 mm bore Brass chromium plated sink mixer swinging spout (wall mounted model) (HOT & COLD) with connecting legs and wall flanges screw down for fixed to GI pipe or brass ferrule etc and fittings or for unions and fixed complete all as specified and directed. |
| 9 | S&F for brass chromium plated over head shower rose with 300 mm long CP shower arm 120 to 150 mm size (round/square pattern)revolving type multi-flow suitable for fixed to GI pipe and fittings or for unions and fixed complete all as specified and directed. |
| 10 | S&F for Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible SS pipe tube and ABS wall hook including making connections and fixed in position complete in all as specified and directed. |
| 11 | Total amount of SCHEDULE 'A' PART - III A(INTERNAL ELECTRIFICATION) (For details see Sch 'A' in PDF folder) |
| 12 | SCHEDULE 'A' PART - III B (INTERNAL ELECTRIFICATION) |
| 13 | M & L for point wiring using 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded (FRLS-H) copper conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed, sunk cast iron or 1.6 mm thick pressed steel terminal box for mounting fittings i.e, modular switch / sockets incl cover plate with frame and covered with 3 mm thick white bakelite / laminated hard glossy surface sheet top cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded FRLS-H copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed for the following: - (Note: Colour code shall be maintained as per IE rule) |
| 14 | One tube light/Bulb/ security light/ bell point controlled by one, one way switch 05 / 06 Amps. |
| 15 | One Ceiling fan point controlled by one, one way switch 05 / 06 Amps. |
| 16 | One Exhaust fan point controlled by one, one way switch 05 / 06 Amps. |
| 17 | One three pin 5 Amp socket on same board with other switches. |
| 18 | One three pin 5 Amp socket on independent board |
| 19 | All as per above but for two way Switch with cables 1.5 Sqmm size |
| 20 | Supply and fixing Switch piano; flush type, single pole, one way, and 5/6 Amps complete all as specified. |
| 21 | Supply and fixing Switch piano; flush type, single pole, two way, and 5/6 Amps IS: 3854 marked with valid complete all as specified. |
| 22 | Supply and fixing Switch socket combination 2 in 1, 6A flush type complete all as specified. |
| 23 | Supply and fixing Switch socket combination 2 in 1, 3 Pin , 6 and 16A flush type universal complete all as specified. |
| 24 | Supply and fixing decorative wall mounted LED tube light fitting 1x 20 watt with polycarbonate housing and integrated electronic driver with all accessories and fixing material complete all as specified and directed. |
| 25 | Supply and fixing decorative LED tube light fitting 1x10 watt wall mounted with extruded polycarbonate ,integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed. |
| 26 | M & L for power point wiring of copper cable FRLS grade,multi stranded 2.5 Sqmm size for 15/16 Amps socket outlet on independent board with 2.5 Sqmm size of copper cable FRLS-H grade,multi stranded earth conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed, sunk cast iron or 1.6 mm thick pressed steel terminal box for mounting fittings i.e, modular switch / sockets incl cover plate with frame and covered with 3 mm thick white bakelite / laminated hard glossy surface sheet top cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 2.50 sqmm size stranded FRLS-H copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed. |
| 27 | All as per item No. 5.14 (as above) here-in-before but one 3 pin Switch socket combination outlet 15 Amp/16 Amp independent, with cable 4.0 Sq mm size, with earth continuity conductor of size 2.5 Sq mm complete all as specified and directed. ( for AC point) |
| 28 | Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed. |
| 29 | Supply and fixing Led lamp 9 watt suitable for batten/ angular holder complete all as specified and directed. |
| 30 | Supply and fixing ding dong bell, AC , 230 volts ,Single pole complete all as specified and directed. |
| 31 | Supply and fixing modular bell push flush type , 5 amps , 240 volts complete all as specified and directed. |
| 32 | Supply and fixing 25W LED security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver with die cast aluminium housing IP 66 protection with lens embedded PC cover including security light brackets made of 32 mm dia GI pipe medium grade upto 0.9 mtr long bend to shape at 100-120 degree including flat iron clamps and suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and directed. |
| 33 | Supply & fixing of ceiling rose, 3 terminal , PVC/polycarbonate isolated body complete all as specified & directed. |
| 34 | Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 08 way, with 200 Amps rated copper bus bar and IP - 54 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB 160 Amps Capacity and 24 Nos MCB's inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed. Note : MCCB and MCBs shall be provided inside the verticle DBs alongwith suitable size of copper wiring. |
| 35 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed. |
| 36 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed. |
| 37 | Supply & fixing MCB, SPN, AC, 240 volts, 'C' curve capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed. |
| 38 | Supply and fixing MCB, SP, AC, 240 volts 'B' curve capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. |
| 39 | Supply and fix MCCB 4 pole,160 Amps 25 kA with fixed overload and fixed short circuit setting Ics= 100% Icu complete all as specified & directed. |
| 40 | Material and labour for earthing with galvanised steel earth plate electrided 600 X 600 X 6 mm thick buried in ground (earth pit not less than 2.25 mtr depth below GL level) with top edge of the plate not less than 1.5 mtr below normal GL level, connected to GI earth lead wire 4.0 mm dia by means of bolts nuts chek nuts and washers of galvanized iron or steel earth lead wire protected by and including 15 mm dia GI pipe medium grade pipe for protection and 20 mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work as in soft/ loose soil, concrete pit in PCC (1:3:6) type C-1, pre cast RCC 1:1:5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100 mm CC both way and 2 No, lifting handle made of 12mm dia TMT bar and set in cement mortor (1:4), funnel wire nesh, charcoal or coke and salt in alternate layer, testing etc complete all as specifide in electrical plate No. 3 of SSR Pt-1 and directed Note:- (i) If the desired earth resistance is not found within permissible limit, shall be redone by contractor at no extra cost. & (ii) Cost of GI wire 4 Sqmm and 15mm dia GI pipe medium grade upto 7.5 m is included in the rate quoted for this item. |
| 41 | Supply and fixing ceiling fans complete with blades, down rods, 5 step type electronic regulator 100 watt capacity and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, 28 Watt with service value 6.00 BEE Five star rated with brushless direct current motor ( BLDC). |
| 42 | Supply, installation, testing and commissioning of storage water heater (geyser) 25 ltr capacity , standing loss less than 0.562 Kwh per day 45 degree C difference of temp as per IS-2082 (five star rated as per BEE), reheating time less than 60 mintues, mixing factor less than 20% shock proof high density PUF insulation body material, glass lined inner tank material having warranty 7 years on tank material, 4 years on heating element and 2 yrs on other spare parts comprising following fittings (a) Glass coated incology element (b) capillary type thermostate (c) digital display unit (d) thermal cutout (e) multifunction valve (f) earth leakage circuit breaker (g) mangesium anode rod cathodic protection (h) flexible cable of suitable length with 3 pin plug of 16 A cap (j) drain plug (k) fusible plug fitted on the crown of water heater with operating temp between 100 degree C to 110 degree C including fixing by grouting and fastener complete all as specified and directed. Make : Havells/CG /Bajaj |
| 43 | Supply and fixing light duty Exhaust fan 300 mm sweep metal body with sturdy steel bird cage,double ball bearing and heavy duty motor copper winding, metal blades and fixing accessories 230 Volt, 28 Watt and including making hole of suitable size in the wall, plastering the surface making good damaged portion with plaster in CM 1:4 incl recolouring complete all as specified and directed. Make : Crompton/Bajaj/Havells |
| 44 | Supply and fixing light duty Exhaust fan 230 mm sweep made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, Rpm 1200, copper winding and fixing accessories 230 Volt and including making hole of suitable size in the wall, plastering the surface making good damaged portion with plaster in CM 1:4 incl recolouring complete all as specified and directed. |
| 45 | Supply and fixing metal plug and socket with MCB SPN 20 Amp metallic P&S and steel enclosure. ( for AC point) |
| 46 | Supply and fixing aviation light LED type fixed on the top of any height including necessary fixing accessories including table. |
| 47 | SCHEDULE 'A' PART - IV (LIFT WORK) |
| 48 | Design, supply, install, testing & commissioning passengers lift for 08 persons, suitable to serve (S + 06) multistory upper floors capacity not less then 544 KG, speed 1.5 MPS, Landing door type 2 panel centre opening auto Door, Landing door Finish Stainless steel in hairline finish, Car width not below then 1200 MM, Car depth not below then 1200, Car height not below then 2200 MM, Car panel stainless steel cabin in hairline, Car entrance width not below then 800 MM, Car entrance height not below then 2000 MM, Car door type 2 panel centre opening auto door, False ceiling - Flat ceiling finish in stainless steel finish, Fan Blower fan, Flooring - PVC Flooring, Light - LED Light, COP & LOP display type - illuminated buttons with dotmatrix scrolling display for direction & Position indicator, Handrail- Yes. Handrail finish Stainless steel, Shaft (W x D) not below then 1800 X 1800, Gearless with machine room, Simplex full collective system with/without attendant ,special features with overload warning indicator, automatic rescue device, floor announcement system with soft, Emergency light & Alarm, 3 way intercom, provision, full curtain infrared door safety, over speed protection, False call cancellation, Anti nuisance, inspection operation. Including testing on completion etc Complete as specified and directed |
| 49 | Design supply, install, testing & commissioning Goods lift for capacity 1000 kg sullablefor (S + 06) multistory upper floors capacity not less then 1000 kg ,speed 1.5 MPS, Landing door type 4 panel centre opening auto Door. Landing door Finish Stainless in hairline finish, Car Door Finish SS in hairline Finish, Car width not below then 1800 MM, Car depth not below then 1300, Car height not below then 2200 MM, Car panel stainless steel cabin in hairline, Car entrance width not below then 1400 MM, Car entrance height not below then 2000 MM, Car door type 4 panel centre opening auto door, False ceiling - Flat ceiling finish in stainless steel finish, Fan Blower fan, Flooring - Stainless steel chequered plate, Light - LED Light, COP & LOP display type Illuminated buttons with dotmatrix scrolling display for direction & Position indicator, Shaft (W x D) not below then 2500 X 1800, Gearless with machine room, Simplex full collective system with/without attendant,special features with overload warning indicator, automatic rescue device, floor announcement system with soft, Emergency light & Alarm, 3 way intercom, provision, full curtain infrared door safety, over speed protection, False call cancellation, Anti nuisance, inspection operation& mäke ESKAY. including testing on completion etc Complete all as specified and directed |
| 50 | M & L, for earthing with gaivanised steel earth plate of size 600 x 600 x 6 mm thick burried directly in ground not less than 2.5 mtr below groud level with top edge of earth plate not less than 1.5 meters below ground level connected by 32 X 6 mm GI strip as earth lead by means of brass nuts and bolt, thimbles, check nuts, washers including concrete chamber of PCC 1.3:6 type C1 using 20 mm graded stone ston aggregate, with fair fair finish, inetrnal surface of concrete chamber shall be given internal dia 300mm X 300mm, 15 mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320 x 320 x 80 mm size (1:2:4) type B1 using 20 mm graded stone aggregate, adequate quantity of common salt, charcoal etc all, as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified incuding and provision of GI strip upto 7.5 mtr long with 40 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, Medium grade, including all excavation and earthn work and connecting the earth strip to an earthing test point/panel including testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | M & L, for earthing with gaivanised steel earth plate of size 600 x 600 x 6 mm thick burried directly in ground not less than 2.5 mtr below groud level with top edge of earth plate not less than 1.5 meters below ground level connected by 32 X 6 mm GI strip as earth lead by means of brass nuts and bolt, thimbles, check nuts, washers including concrete chamber of PCC 1.3:6 type C1 using 20 mm graded stone ston aggregate, with fair fair finish, inetrnal surface of concrete chamber shall be given internal dia 300mm X 300mm, 15 mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320 x 320 x 80 mm size (1:2:4) type B1 using 20 mm graded stone aggregate, adequate quantity of common salt, charcoal etc all, as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified incuding and provision of GI strip upto 7.5 mtr long with 40 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, Medium grade, including all excavation and earthn work and connecting the earth strip to an earthing test point/panel including testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information |
