|
| 1 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :(a) 100 mm dia |
| 2 | (b) 150 mm dia |
| 3 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :(a) 150 mm dia |
| 4 | Supplying, fixing, testing and commissioning of Hose box (Double Door) (900mm x 600mm x 500mm) 16 gauge which is suitable for 2 no. 15mtr. Hose and 1 no short branch pipe and 1 no hydrant and painting with two or more coats of synthetic enamel paint of required shade completes as required. |
| 5 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. |
| 6 | Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. |
| 7 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
| 8 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. |
| 9 | Supplying, Replacement, Installation, Testing and Commissioning of Main Fire Alarm Control Panel made out of 16 SWG MS Sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, public address system, monitoring system including connections, interconnections. 24 Zone Microprocessor Based Fire Alarm Control Panel, having provision of each zone address/location programming via key pad , each zone power isolation & loop voltage cut-off facility, Minimum 999 event data logging storage, High resolution LCD display. Incorporated Software controlled. Having C/NC/NO potential free relay control for FIRE, OPEN & SHORT. Walk test facility and open Communication port., Heavy duty power supply of 230V AC and frequency of 50 Hz 6 Amp 24volt DC separate output for battery charger all the feature accommodates in single wall mount double door with locking arrangement cabinet, complete in all respect as per IS-2189-2008 features as required. extra space for further features up gradation’s construction like signal relay and i/o ADC sensor output extra space for modules as per your site requirement. 250 Watt PA Amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories -2 Nos. (one to act as standby).Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set.Announcement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required -1 set.Amplifier change over switch for inter changing amplifier - 1 No.Monitor Panel for loudspeaker complete with output selector, ON/OFF switch, fuse, visual indications etc. complete as required -1 No.Dynamic microphone with stand and ON/OFF switch- 1 No. Main ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc. complete as required -1 set.Main ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc, complete as required - 1 sets. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing space for 2 nos.12 volt, 60 AH each sealed maintenance free batteries -1 set (with battery). |
| 10 | Supplying, Replacement, Installation, Testing and Commissioning of 8 Zone sector panel, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. |
| 11 | Providing & fixing of Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) i/c rubber gasket in the existing hose box etc. complete as required. |
| 12 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.(a) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 13 | Supplying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size including testing, commissioning etc. complete as required at site.a) 6X 1.5 sq. mm |
| 14 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.a) Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 15 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.a) Upto 35 sq. mm |
| 16 | Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres. |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :a) 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) Please Enable Macros to View BoQ information |
