|
| 1 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified and as directed. |
| 3 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified and as directed. |
| 4 | M&L for brick work with sub class `B' bricks(using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:6) including demolition of old brick work from its position complete all as specified and as directed. |
| 5 | All as per Ser item No 4.00 (here-in-before) but except bricks. |
| 6 | M&L for 15mm thick rendering in cement mortar (1:4) on fair face brick work/concrete surfaces finished even and smooth without using extra cement including taking down old platster from its positions complete all as specified and directed. |
| 7 | M&L for 15mm thick rendering in cement mortar (1:4) on fair face brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in surface channels and drain bed including demolition of old cement concrete complete all as specified and as directed. |
| 9 | M&L for PCC (1:2:4), type B-0 ( using 12.5mm graded stone aggregate) as in coping including necessary formwork complete all as specified and as directed. |
| 10 | Use and waste formwork to faces of walls,retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc vertical curved or to batter for rough finished flat surfaces of concrete etc complete all as specified and as directed. |
| 11 | M&L for providing precast reinfoced cement concrete type B-1, (1:2:4) (Using 20 mm graded stone aggregate) as in cover slabs for drain & similar articles set in cement mortar (1:4) including demolition of existing reinforced concrete cover complete all as specified and directed. |
| 12 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with complete all as specified and as directed. |
| 13 | M&L for TMT bars, 6 to 8mm, cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and incl MS wire(annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 14 | M&L for cement concrete Type C-2, (1:3:6) (using 40mm graded stone aggregate) as in foundation, filling and mass concrete including demolition of old cement concrete complete all as specified and as directed. |
| 15 | Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed. |
| 16 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | M&L for PCC (1:4:8) Type D-2, 100mm thick (using 40mm graded stone aggregate) as in sub base including demolition of old cement concrete complete all as specified and as directed. |
| 18 | M&L for PCC (1:3:6) Type D-2 (using 40mm graded stone aggregate) 75 mm thick as in sub base finished even and rough including demolition of old cement concrete complete all as specified and as directed. |
| 19 | M&L for PCC (1:4:8) Type D-2 (using 40mm graded stone aggregate) 75 mm thick as in sub base finished even and rough including demolition of old cement concrete complete all as specified and as directed. |
| 20 | S&F in repairs PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches/floor/weep holes and similar work complete all as specified and as directed. |
| 21 | S&F PVC (SWR) 110mm dia bends in any radius complete all as specified and directed. |
| 22 | S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 23 | S & F 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 24 | M&L for 100mm thick Cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base flooring/ hard standing/pavings finished even and smooth without using extra cement including demolition of old cement concrete complete all as specified and as directed. |
| 25 | M&L for 100mm thick Cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in hard standing/path laid in alternate bays(n.exc 4sqm each) and finished even and smooth without using extra cementincluding demolition of old cement concrete complete all as specified and as directed. |
| 26 | M&L for heavy duty full body vitrified digital paving tiles of size 300x300x(9-10)mm each with pigment, in floors laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 27 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid, jointed with grey cement and no pigment laid over and including 50 mm thick sand cushioning and pointed in colour cement mortar (1:3) including dismantling of old paver block and removing serviceable blocks to store and rubbish off the premises complete all as specified and directed. |
| 28 | M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bed for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. Please Enable Macros to View BoQ information |
