|
| 1 | Supply and fixing of aluminium anodised door with frame and shutter, and glazing 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down unserviceable existing door etc complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plugwidth;- 85x44.5x1.20 mm thickBottom;- 100x44.5x1.20 mm thickStyle;- 85x44.5x1.20 mm thickGlazing beading;- 0.70 mm thickAluminium handle 'D' type ;- 150mmAluminium tower bold 9.9 mm dia shoot 200 mm longMortice lock stainless steel - 100 mm 4 lever Aluminium stopper cleataluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed(ii) PCC shall be measured and paid seperatelly (iii) Work will be carried out up to 5th storeyMake: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Green ply/Kit ply/ Century ply (iii) Glass: Saint gobain / Modi guard / Tata |
| 2 | Supply and fixing of aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading including taking down unserviceable existing partion etc of following sizes;-Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thickBottuom section;-100x44.5x1.22 mm thickComplete all as specified and directed by the Engr in chargeWork will be carried out up to 5th storeyMake: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Green ply/Kit ply/ Century ply (iii) Glass: Saint gobain / Modi guard / Tata |
| 3 | Taking down chowkhats or frames with shutter n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 4 | Taking down chowkhats or frames with exc 1.5 sqm n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed |
| 5 | Taking down shutter of any description, not exc. 1 Sqm each complete all as specified and directed. |
| 6 | Taking down shutter of any description, exc. 1 Sqm but n. exe 2 sqm each complete all as specified and directed. |
| 7 | Supply and fixing of factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kilogram/Cubic Metre from ISO certified company door should be water proof teRunning Metreite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed |
| 8 | Supply and fixing of 30 mm thick moulded WPC factory made 100% solid door (confoRunning Metreing as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kilogram/Cubic Metre. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed. |
| 9 | Material and labour for 30 mm thick, factory made flush shutters,BWR solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 10 | Material and labour for 35mm thick IInd class hard wood Golder Teak plain fancy, framed panelled shutter machine made with panels of timber flat on both sides feather edged supplied and fitted to chowkats complete all as specified and directed. |
| 11 | Supply and fixing of 35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed. |
| 12 | Taking down Aluminium window shutter size n. exc 1 Sqm each including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make the window functional complete all a specified and directed. |
| 13 | Taking down Aluminium door shutter size exc 1 Sqm n exc. 2sqm eachincluding opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make the door functional complete all a specified and directed. |
| 14 | Supply and fixing of mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified & dismantling complete all as specified and directed. |
| 15 | Supply and fixing in repair of pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including complete all as specified and as directed. |
| 16 | Dismantling of timber scantlings 40 Sqcm and over in section in any position and in any situation. (unframed work) complete all as specified and directed. |
| 17 | Supply and fixing of steel work in tubular trusses/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed |
| 18 | Supply and fixing of 100 mm size stainless steel butt hinges 204 grade, and fixed with stainless steel screws, complete all as specified and directed. |
| 19 | Supply and fixing of 200 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed |
| 20 | Supply and fixing of 150 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section complete all as specified and directed. |
| 21 | Supply and fixing of 100 mm size solid in one piece stainless steel handles, in 304 grade and fixed in stainless steel screws all as directed complete all as specified and directed |
| 22 | Supply and fixing of stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts,and fixed 250mm long complete all as specified and directed. |
| 23 | Supply and fixing of floor door stopper of alluminium alloy body and tongue anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed. |
| 24 | Supply and fixing in repair of 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed. |
| 25 | Dismantling of old aluminium anodised partition with frame, (fixed type) with aluminum glazing clip, snap beading and refixing the same in other locations complete all as specified and directed |
| 26 | Supply and fixing of 5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.50sqm each pane including hacking out old broken glass (any thickness) complete all as specified and directed |
| 27 | Supply and fixing of glazing (5.00 mm thick plain /frosted glass) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket and aluminium snap beading etcincluding hacking out old broken glass (any thickness) complete all as specified and directed |
| 28 | Supply and fixing of welding in repairs length exc 2.5 cm but n. exc 5 cm & metal to be welded n.exc 6 mm thick complete all as specified and directed. |
| 29 | Supply and fixing in repair of aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kilogram and fixed with stainless steel screw complete all as specified and directed. |
| 30 | Supply and fixing in repair of 20mm dia stainless steel 202 Gde drapery rod with incl brackets, decorative finials at both ends complete all as specified and directed. |
| 31 | Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including taking up or down complete all as specified and directed. |
| 32 | Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including taking up or down complete all as specified and directed. |
| 33 | Material and labour PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of formwork and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed. |
| 34 | Material and labour cement concrete 1:3:6 type C-1(using 20 mm graded aggregate) 75 mm thick as in plinth protection / path surface finished even and smooth without using extra cement including demolition existing PCC complete all as specified and directed |
| 35 | Material and labour PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete etc. including demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed. |
| 36 | Material and labour for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed. |
| 37 | Material and labour for 100mm thick cement concrete 1:4:8 type D2 40mm graded stone aggregate coplete all as specified and directed |
| 38 | Material and labour for 25 mm thick cement concrete in 1:2:4 type B-0 using 12.5mm graded stone aggregate as in levelling course complete all as specified and directed |
| 39 | Material and labour for prepolished chequered cement concrete tiles coloured 30cmx30cmx22-25mm thick, set jointed and pointed in neat cement slurry @ 3.00Kg/Sqm with grey cement and pigment over and including 15mm thick screed bedding layer (1:6) complete all as specified and including dismantling of tiles complete all as specified and directed |
| 40 | Material and labour for non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry @ 3.00Kg/Sqm and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed |
| 41 | Material and labour for glazed ceramic tiles coloured of size 450x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white cement to match over and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of old tiles complete all as specified and directed |
| 42 | Material and labour for double charge vitrified ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed |
| 43 | Material and labour in patches for non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry @ 3.00Kg/Sqm and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed |
| 44 | Material and labour in patches for glazed ceramic tiles coloured size of size 450x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white cement to match on and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of tiles complete all as specified and directed |
| 45 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed |
| 46 | Material and labour for 20 - 25 mm thick machine cut Kota stone slab as in flooring over 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry @ 3.00 Kg/Sqm mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed. |
| 47 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 48 | Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement with pigment including demolition of existing floor complete all as specified and as directed |
| 49 | Material and labour for cutting/grinding and polishing of exterior kota sotne/ terrazzo floorin top surface complete all as specified and directed. |
| 50 | Material and labour 18-20 mm thick granite ( of any type) (table rubbed and polished ) in steps, jambs,pillars, window-cills, cooking platefoRunning Metre, and like in ceme t mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 51 | Material and labour brick work with sub class ‘B’ bricks old size straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) and including demolition of old brick work complete all as specified and directed. |
| 52 | Material and labour rendering 15mm thick in patches n exc 3 Sqm in cement mortar 1:4 mixed with and including water proofing compound , on fair faces of brick/concrete surfaces of wall,finished even and fair without using extra cement including taking down the existing plaster complete all as specified and directed. |
| 53 | Material and labour rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick /concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 54 | Material and labour rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick /concrete surfaces and finished even and smooth without using extra cement including taking down the existing plaster complete all as specified and directed. |
| 55 | Material and labour rendering 15mm thick in cement mortar 1:4 mixed with and including water proofing compound, fair faces of brick/concrete surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 56 | Material and labour for preparation of new plastered surfaces of wall and applying wall care putty 1 to 1.5 mm thick to make the surface smooth complete all as specified and as directed |
| 57 | Material and labour for two coats of oil bound distemper in any tint on walls including preparation of new plastered surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed |
| 58 | Material and labour for two coats of cement base paint on external wall surfaces including preparation of new plastered surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed . |
| 59 | Supply and fixing in repair of galvanised mild steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed. |
| 60 | Supply and fixing of 4 mm thick 'E' board (classic) of size 600x600 mm false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E board with ceiling section & perimeter of angle 25x25x0.50 mm thick including taking down the existing ceilling complete all as specified and directed. all a specified, and directed .. |
| 61 | Supply and fixing of hollow profile PVC Wall panneling consisting of 5mm thick PVC sheet inclusive of solvent and fixing to walls on PVC frame including all fillets as per specifications and drawing including taking down the existing Wall penalling etc complete all as specified and directed. |
| 62 | Material and labour for cutting chases for concealed water tubing and making good in CM 1:3 on brick wall cutting exc 10 Cm & n.exc 20 Cm in girth.complete all as specified and directed. |
| 63 | Supply and fixing of rotational moulded polyethylene(triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I including dismantling of water tank and remove from site complete all as specified and directed. |
| 64 | Supply and fixing of rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I including dismantling of water tank and remove from site complete all as specified and directed. |
| 65 | Supply and fixing in repair PVC connection 15 mm dia 450 mm long with brass fly nut at both ends connected to iron pipe complete all as specified and directed. |
| 66 | Supply and fixing in repair of vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including single trap spun casted 60 cm long fix in eposy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed. |
| 67 | Supply and fixing in repair of 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed. |
| 68 | Supply and fixing in repair of 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified and directed. |
| 69 | Supply and fixing in repair of pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 70 | Supply and fixing in repair of 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with hand elbow operated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 71 | Supply and fixing in repair of stainless steel grating 100 mm dia size complete all as specified and directed. |
| 72 | Material and labour for cleaning of water storage tank capacity exceeding 500 litres but not exceeding 1000 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner and marking the outer surface of overhead tank with synthetic enamel paint using stancils (Date of cleaning month & Year) complete all as specified and directed. |
| 73 | Supply and fixing in repair ofs 20 mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 74 | Supply and fixing in repair of vitreous china wash down (EWC) water closet pan(pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat and cover white for pedestal pattern complete all as specfied and directed. |
| 75 | Supply and fixing in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete all as specified and directed. |
| 76 | Supply and fixing in repair of half stall china urinals (wall type) complete incl plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cement and waste pipe etc complete all as specified and directed |
| 77 | Supply and fixing in repair of 32 mm dia waste fittings, brass chromium plated for Glazedware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in red lead cement and other end fixed complete all as specified and directed. |
| 78 | Supply and fixing in repair of 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 79 | Supply and fix in repair 15 mm dia CP brass Wall mixer with provision of over head shower complete with 115 mm long bend pipe, connecting legs & wall flange complete all as specified and directed. |
| 80 | Supply and fixing in repair of 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed ,complete all as specified and directed. |
| 81 | Supply and fixing in repair of Plastic Water Closet seat cover ,white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 82 | Supply and fixing in repair of PVC waste pipe flexible type 32 mm dia with coupler complete all as specified and directed . |
| 83 | Supply and fixing in repair of PVC waste pipe for urinal flexible type with 50 mm dia coupler complete all as specified and directed . |
| 84 | Supply and fixing in repair of 75 mm bore UPVC (SWR) pipe 4 Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wallcomplete all as specified and directed . |
| 85 | Supply and fixing in repair of 110 mm bore UPVC (SWR) pipe 4 Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed . |
| 86 | Material and labour for two coats of oil bound distemper in any tint on walls including preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed |
| 87 | Material and labour for two coat of cement base paint on external wall surfaces including preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed . |
| 88 | Material and labour for preparation of new painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of Synthetic enamel Paint complete all as specified and directed . |
| 89 | Material and labour for preparation ofnew steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed. |
| 90 | Supply and fix in repair factory made pre laminated WPC flush type shutter of 18mm (+ 0.5) thickness consisting of panel of 18mm (+0.7mm) thick celuka ply, of denistity 600 Kg per cum manufactured by ISO-9000 certified company, using for shutter celuka ply 18mm thick and fixed with frame, all four edges of shutters, using 13/6 size self tapping steel screws. The thickness of shutter is edges painted by matching colour of PVC lining of prelam coloured PVC sheet using etc, complete as per manufactue specification. |
| 91 | Supply and fixing in repairs heavy duty thread type PVC water tank cover with fixing frame fixed on PVC tank with 4 Nos of screws for 500/1000 ilts tankcomplete all as specified and directed . |
| 92 | Supply and fixing in repair CP health faucet with 1.20 mtr metallic expandable tube & hook complete all as specified and directed. |
| 93 | Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in any type soil complete all as specified and directed. |
| 94 | Returning filling in soil including spreading leveling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed. |
| 95 | Removing excavated material /soil n.exc 50 m and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed. |
| 96 | Supply and fixing in repair mirror cabinet of size 446x505x125 mm, decorative type PVC frame, fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified . Please Enable Macros to View BoQ information |
| 97 | Supply and fixing in repair mirror cabinet of size 446x505x125 mm, decorative type PVC frame, fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified . Please Enable Macros to View BoQ information |
