|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work:Repair Maintenance of pumping system and other connected items installed at Tawi Jack Well, Tawi filter and Old MH pump house under GE Utilities Udhampur Contract No: GE/U-36/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Material and labour for decoupling and disconnecting suction and discharge pipelines, dismantling and taking down the pump set from foundation, dismounting from base channels, stripping and opening of all pump components, derusting, cleaning, and complete overhauling, including repair or replacement of unserviceable parts of the pump set, and transportation to workshop for repairs wherever required. Reassembling of the pump set, mounting and fixing on base channels, recoupling of suction and discharge lines, alignment, commissioning and testing, complete, in respect of centrifugal / multistage pump of capacity 200 to 270 HP, complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | Note: The quoted rate shall be deemed to include the following:(i) Provision of hydra crane, if required, complete with operator, helper(s) and requisite number of mates for decoupling, disconnecting, loading, unloading, positioning, fixing on base channels, recoupling of suction and discharge lines and alignment of pump set.(ii) Vehicle for transportation of pump set to and from workshop, wherever required.(iii) Manpower comprising Skilled Pump Mechanic for dismantling, overhauling, reassembly and alignment works.(iv) Tools & Plants including slings, lifting tackles, holding/catching devices, clamps, load supports and all other accessories required for safe handling of the pump set.(v) Skilled Electrician for disconnection and reconnection of electrical connections of pump motor and associated control panel, including testing after reinstallation.(vi) S&F of replacement parts, shall be measured and paid for separately under the relevant items of Schedule ‘A’. |
| 4 | Description all as per ser item No 1.00 here-in-before but capacity 150/170HP. |
| 5 | Description all as per ser item No 1.00 here-in-before but capacity 75/100 HP. |
| 6 | Supply & Fix parts in repair for single/double/multistage pumps of capacity 270/200 HP head 140 mtr discharge 4561 LPM as per manufacturer's composition of existing make of pump as below, complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | Pump impeller made out of stainless steel |
| 8 | Pump shaft MOC-SS |
| 9 | Tyre coupling. |
| 10 | Star /Tyre coupler made of steel |
| 11 | Gland cup with nuts and bolts |
| 12 | Shaft sleeves |
| 13 | Bearing stuff box pump/motor side |
| 14 | Neck ring |
| 15 | Guide bush |
| 16 | Shaft check nut |
| 17 | Supply & Fix parts for single/double/multistage pumps of capacity 150/170 HP head 120 mtr discharge 4157 LPM as per manufacturer's composition of existing make of pump as below, complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | Pump shaft MOC-SS |
| 19 | Tyre coupling. |
| 20 | Star /Tyre coupler made of steel |
| 21 | Gland cup with nuts and bolts |
| 22 | Shaft sleeves |
| 23 | Bearing stuff box pump/motor side |
| 24 | Neck ring |
| 25 | Guide bush |
| 26 | Shaft check nut |
| 27 | Pump impeller made out of stainless steel |
| 28 | Supply & Fix parts for single/double/multistage pump of capacity 75/100 HP head 30 mrt discharge 7200 LPM as per manufacturer's composition of existing make of pump as below, complete all as specified and directed . |
| 29 | Pump impeller made out of stainless steel |
| 30 | Pump shaft MOC-SS |
| 31 | Tyre coupling. |
| 32 | Star /Tyre coupler made of steel |
| 33 | Gland cup with nuts and bolts |
| 34 | Shaft sleeves |
| 35 | Bearing stuff box pump/motor side |
| 36 | Neck ring |
| 37 | Guide bush |
| 38 | Shaft check nut |
| 39 | Material and labour for disconnecting electrical connections of 270/250/200 HP motor, dismantling and removing the unserviceable motor from its existing position by unscrewing foundation bolts and nuts, decoupling the motor from the pump, shifting and transporting the same to workshop for repairs, including dismantling of motor, cutting and removal of burnt stator/rotor windings, cleaning of slots, and transporting the motor back after repairs/winding. Re-assembling, refixing and aligning the motor at its original location, including coupling with pump, commissioning and testing, complete, all as specified and as directed by the Engineer-in-Charge.Note:(i) Rewinding of motor stator and/or rotor shall be measured and paid for separately under the relevant items of Sch ‘A’.(ii) The quoted rate shall be deemed to include the cost of loading, unloading, transportation, Bearings, grease, nuts, bolts and washers of any size and shape, minor consumables, refixing of serviceable motor, electrical reconnection, alignment with pump, and making the motor fully functional, including testing at its existing location/position, complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | Description all as per Ser item No 7.00 here-in-before but capacity 170HP motor. |
| 41 | Description all as per Ser item No 7.00 here-in-before but capacity of 75/100 HP motor. |
| 42 | Description all as per Ser item No 7.00 here-in-before but capacity of of 15/20/25 HP motor. |
| 43 | Removing burnt-out winding from rotor and stator, cleaning of slots thoroughly, repairing and refilling of damaged slots wherever required with approved insulating/slot repair material, providing and inserting high quality Class ‘B’ insulation paper inside the slots, rewinding of electric motor of any capacity/make with super enamelled copper winding wire of same size and gauge as per existing, wrapping with high quality cotton tape, varnishing with superior quality insulating varnish, including baking/drying at required temperature and for required duration, complete all as specified and as directed by the Engineer-in-Charge.Note: The quoted rate shall be deemed to include the cost of all labour, slot repairing/refilling material, insulation, winding, varnishing, baking/drying and routine testing. |
| 44 | Lathe/Machining works of any type at workshop required for balancing of impller/for fixing of new parts to existing shafts and bearing housing, shaft key work required for proper setting and smooth functioning to achieve desired discharge of the pump for 270/250 HP pump, complete all as specified and as directed by the Engineer-in-Charge. |
| 45 | Lathe/Machining works of any type at workshop required for balancing of impller/for fixing of new parts to existing shafts and bearing housing, shaft key work required for proper setting and smooth functioning to achieve desired discharge of the pump for 170/150/200 HP pump, complete all as specified and as directed by the Engineer-in-Charge. |
| 46 | Lathe/Machining works of any type at workshop required for balancing of impller/for fixing of new parts to existing shafts and bearing housing, shaft key work required for proper setting and smooth functioning to achieve desired discharge of the pump for 100 HP pump, complete all as specified and as directed by the Engineer-in-Charge. |
| 47 | Lathe/Machining works of any type at workshop required for balancing of impller/for fixing of new parts to existing shafts and bearing housing, shaft key work required for proper setting and smooth functioning to achieve desired discharge of the pump for 75 HP pump, complete all as specified and as directed by the Engineer-in-Charge. |
| 48 | Supply and fixing in replacement of pump/motor bearing No. 6314 series as per existing specification including taking down the old existing bearing, complete all as specified and as directed by the Engineer-in-Charge. |
| 49 | Supply and fixing in replacement of pump/motor bearing No. 6308 series as per existing specification including taking down the old existing bearing, complete all as specified and as directed by the Engineer-in-Charge. |
| 50 | Supply and fixing in replacement of pump/motor bearing No. 6309 series as per existing specification including taking down the old existing bearing, complete all as specified and as directed by the Engineer-in-Charge. |
| 51 | Supply and fixing in replacement of pump/motor bearing No. 6311 series as per existing specification including taking down the old existing bearing, complete all as specified and as directed by the Engineer-in-Charge. |
| 52 | M&L in replacement of Copper lugs heavy duty suitable for 185 Sqmm Copper cable including taking down the existing unserviceable one, complete all as specified and as directed by the Engineer-in-Charge. |
| 53 | M&L in replacement of Copper lugs heavy duty suitable for 150 Sqmm Copper cable including taking down the existing unserviceable one, complete all as specified and as directed by the Engineer-in-Charge. |
| 54 | M&L in replacement of Copper lugs heavy duty suitable for 120 Sqmm Copper cable including taking down the existing unserviceable one, complete all as specified and as directed by the Engineer-in-Charge. |
| 55 | M&L in replacement of Copper lugs heavy duty suitable for 95 Sqmm Copper cable including taking down the existing unserviceable one, complete all as specified and as directed by the Engineer-in-Charge. |
| 56 | M&L in replacement of Aluminium lugs suitable for 600 Sqmm for eletric cable including taking down the existing unserviceable one, complete all as specified and as directed by the Engineer-in-Charge. |
| 57 | M&L in replacement of Aluminium lugs suitable for 400 Sqmm for eletric cable including taking down the existing unserviceable one, complete all as specified and as directed by the Engineer-in-Charge. |
| 58 | M&L in replacement of Aluminium lugs suitable for 240 Sqmm for eletric cable including taking down the existing unserviceable one, complete all as specified and as directed by the Engineer-in-Charge. |
| 59 | M&L in replacement of Aluminium lugs suitable for 150 Sqmm for eletric cable including taking down the existing unserviceable one, complete all as specified and as directed by the Engineer-in-Charge. |
| 60 | Supply and fix Gland packing type 3 of size 12.5 to 25 mm made of asbustus grip with silicon, complete all as specified and as directed by Engr-in-Charge |
| 61 | Supply and fixing rubber gasket including replacement old UNSV gasket for 300/250 mm complete all as specified and directed by Engr-in-Charge. |
| 62 | Supply and fixing rubber gasket including replacement old UNSV gasket for 200/150 mm complete all as specified and directed by Engr-in-Charge. |
| 63 | Supply and fixing gasket rubber sheet thickness 4 mm,size 2 ft x 4 ft complete all as specified and as directed by Engr-in-charge. |
| 64 | Supply and fixing gasket sheet thickness 2 mm (for pump), complete all as specified and as directed by Engr-in-charge. |
| 65 | M&L Power contactor 3/4 pole AC control conformance to IEC, CE marking, current rating 150-185 Amp AC-3, suitable (in replacement ) for 75/100 HP capacity, complete all as specified and directed by Engr-in-Charge. |
| 66 | M&L Power contactor 3/4 pole AC control conformance to IEC, CE marking, current rating 250-300 Amp AC-3, suitable (in replacement ) for 170 HP capacity, complete all as specified and directed by Engr-in-Charge. |
| 67 | M&L Power contactor 3/4 pole AC control conformance to IEC 60947-4-1, CE marking, current rating 400-450 Amp AC-3, suitable (in replacement )for 270/250 HP capacity, complete all as specified and directed by Engr-in-Charge. |
| 68 | M&L Power contactor 3/4 pole AC control conformance to IEC 60947-4-1, CE marking, current rating 25 Amp AC-1 suitable (in replacement ), complete all as specified and directed by Engr-in-Charge. |
| 69 | M&L Power contactor 3/4 pole AC control conformance to IEC 60947-4-1, CE marking, current rating 30 Amp AC-1 suitable (in replacement ) complete all as specified and directed by Engr-in-Charge. |
| 70 | M&L Power contactor 3/4 pole AC control conformance to IEC 60947-4-1, CE marking, current rating 55 Amp AC-1 suitable (in replacement ) complete all as specified and directed by Engr-in-Charge. |
| 71 | M&L Relay 3/4 pole current rating 180 Amp AC-3, suitable (in replacement ) for 75/100 HP capacity, complete all as specified and directed by Engr-in-Charge. |
| 72 | M&L Relay 3/4 pole current rating 265 Amp AC-3, suitable (in replacement ) for 170 HP capacity, complete all as specified and directed by Engr-in-Charge. |
| 73 | M&L Relay 3/4 pole current rating 400 Amp AC-3, suitable (in replacement ) for 270/250 HP capacity, complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F Star-delta Star Timer 160-500V for 3-30s and pause time (30-150ms) (in replacement ) for 270/250 HP capacity, complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F in replacement MCB TPN 40 Amp 'C' curve complete all as specified and directed by Engr-in-Charge. |
| 76 | S&F in replacement MCB TPN 40 Amp 'C' curve complete all as specified and directed by Engr-in-Charge. |
| 77 | Supply fabrication and fixing MS joints like bends Tee, tapers, collars, elbow, tail piece (any type) caps, plugs up to 150 mm to 250 mm bore, complete all as specified and as directed by the Engineer-in-Charge. |
| 78 | S&F in replacement of grouting nuts and bolts of size suitable for pumps and motors, foundation of various capacity installed at installation & sluice/Non return/Foot/Air release valve flange, complete all as specified and as directed by the Engineer-in-Charge. |
| 79 | S&F in replacement of MS stud bolts of existing size suitable for pumps 270/250/200/100/75 and motors of various capacity installed at installations, complete all as specified and as directed by the Engineer-in-Charge. |
| 80 | M&L for in replacement of copper cable 240 sqmm multistandard single core PVC insulation, complete all as specified and as directed by the Engineer-in-Charge. |
| 81 | M&L for in replacement of copper cable 120 sqmm multistandard single core PVC insulation, complete all as specified and as directed by the Engineer-in-Charge. |
| 82 | M&L for pumpset 270/250 HP foundation fabrication work with welding work and aligment of suction and delivery line of pumpset with replacement of old wornout pieces, complete all as specified and as directed by the Engineer-in-Charge. |
| 83 | M&L for pumpset 100/75 HP foundation fabrication work with welding work and aligment of suction and delivery line of pumpset with replacement of old wornout pieces , complete all as specified and as directed by the Engineer-in-Charge. |
| 84 | M&L for spray painting to pump sets including surface preparation by scrapping with emery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfaction, complete all as specified and as directed by the Engineer-in-Charge. |
| 85 | Demolation of cement concrete reinforced)of any description and in any position not otherwise specially provided, complete all as specified and as directed by the Engineer-in-Charge. |
| 86 | M&L For for RCC(1:2:4) (nominal mix) in foundation,including rafts,footings,foundation beams: bases for colums,etc; basement slabes,underreamed piles and mass concrete using 20mm grade stone aggrigate, complete all as specified and as directed by the Engineer-in-Charge. |
| 87 | S& F Nut bolts with rubber bush suitable for Star coupling/Tyre coupling of 270/250/200HP pumpset , complete all as specified and as directed by the Engineer-in-Charge. |
| 88 | S& F Nut bolts with rubber bush suitable for Star coupling/Tyre Coupling of 100/75 HP pumpset, complete all as specified and as directed by the Engineer-in-Charge. |
| 89 | Supply and laying Galvanized steel GI flexible conduit pipe 25 mm dia, complete all as specified and as directed by the Engineer-in-Charge. |
| 90 | S&F of Gun-metal, globe or gate valves, 20 mm dia , heavy duty, with iron wheel head, and nipple 75 mm with elbow (ISI marked), complete all as specified & directed.. |
| 91 | S&F of Gun-metal, globe or gate valves, 15 mm dia , heavy duty, with iron wheel head,and nipple 75 mm with elbow (ISI marked), complete all as specified and as directed by the Engineer-in-Charge. |
| 92 | Supply only lithium base grease AP3 in 20 Kg pack suitable for application to ball bearing with operating temperature 30 to 120 degree celsius drop point 174 degree celsius, colour light fawn, complete all as specified and as directed by the Engineer-in-Charge. |
| 93 | Supply only cotton waste coloured Grade \\"A' for cleaning rags, complete all as specified and directed by Engr-in-Charge |
| 94 | Supply and fix in replacement of cast iron non return valve suitable for 150 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing. Item Art No : 1083C. Complete all as specified and directed by Engr-in-Charge. |
| 95 | S&F V-belt for Air compressor/blower size B 82 as per IS: 2494 (Part-1), complete all as specified and as directed by the Engineer-in-Charge. |
| 96 | S&F V-belt for Air compressor/blower size B 1846 Lp/ B71 as per IS: 2494 (Part-1 ), complete all as specified and as directed by the Engineer-in-Charge. |
| 97 | Supply only stainless steel telescopic leaf skimmer having upto 1.5mtr long adjustable handle, complete all as specified and as directed by the Engineer-in-Charge. |
| 98 | S&F of self-priming pipe suitable for pumpset 270/250/200/170/100/75 HP , complete all as specified and as directed by the Engineer-in-Charge. |
| 99 | S&F in replacement Din type high breaking capacity fuse link 315 Amp, 500V ac, 120ka, type-VSK 315, as per IS:13703 part II, complete all as specified and as directed by the Engineer-in-Charge. |
| 100 | S&F in replacement Din type high breaking capacity fuse link 400 Amp, -690/700V ac, 120ka, type-VSK 315, as per IS:13703 part II , complete all as specified and as directed by the Engineer-in-Charge. |
| 101 | S&F 3D signage board made of high quality plastic material with raised 3D letters supported with iron frame of size 8 mtr x 0.6 mtrs in Acrylic sheet moulded letters OLD MH FILTER PLANT GE(U) and TAWI POWER HOUSE GE(U) including MES logo printed on both side of name on the blue background with white colour of size 1x1 feet white in colour with good quality LED Strip including constant current electronic driver and making connection with suitable size copper conductor multistranded FRLSH wire including fixing on wall with clamps, complete all as specified and directed by Engr-in-Charge.Make of LED strip :-Philips,Wipro,Havells or equivalent |
| 102 | Supply only of o-Tolidine Reagent, suitable for determination of residual chlorine in water, supplied in original manufacturer’s sealed bottle of 500 ml capacity, complete with proper labeling, batch number, manufacturing & expiry date, with minimum remaining shelf life of not less than one year at the time of supply, and safety markings, conforming to standard laboratory testing requirements, complete all as specified and as directed by the Engineer-in-Charge. |
| 103 | Supply only of pH Indicator Solution / Reagent, suitable for determination of pH value of potable water, compatible with standard field and laboratory water testing methods, supplied in original manufacturer’s sealed bottle of 500 ml capacity, complete with proper labeling, batch number, manufacturing date and expiry date, with minimum remaining shelf life of not less than one (01) year at the time of supply, along with safety markings and handling instructions, conforming to standard laboratory testing requirements, complete all as specified and as directed by the Engineer-in-Charge. |
| 104 | Supply only in replacement stainless steel wire brush complete with 2.4 metre long adjustable handle, suitable for cleaning of tank walls/surfaces, complete, all as specified and as directed by the Engineer-in-Charge. |
| 105 | S&F Pressure Range: 0 to 21 kg/cm² (with a corresponding 0 to 300 lb/in² scale) Construction: Analog dial display, typically constructed with a metal casing and brass internals for general industrial applications. Features: Features a dual scale for both metric complete, all as specified and as directed by the Engineer-in-Charge. |
| 106 | S&F Pressure Range: 0 to 2.1 kg/cm² (with a corresponding 0 to 30 lb/in² scale) Construction: Analog dial display, typically constructed with a metal casing and brass internals for general industrial applications. Features: Features a dual scale for both metric complete, all as specified and as directed by the Engineer-in-Charge. |
| 107 | Supply only Mild steel eletrode welding rods 3.15x3.50mm clean ripple finish low spatter ideal for grills gates, frames (Pack of 90Pcs) complete, all as specified and as directed by the Engineer-in-Charge. |
| 108 | Dismantling and taking down of all electrical and mechanical connections of pump set (capacity 170/200 HP), and shifting from Tawi Filter to Tawi Jackwell-01 and Tawi Jackwell to B Reservoir-01.Job includes lifting with crane/hydra, transportation by auto pickup, re-installation on RCC platform, making all electrical and mechanical connections with the help of electrician/welder, and complete testing of the system, complete all as specified and as directed by the Engineer-in-Charge. |
| 109 | Supply and fix in replacement of cast iron non return valve suitable for 200 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing. Item Art No : 1083C. Complete all as specified and directed by Engr-in-Charge. |
| 110 | Supply and fix in replacement of cast iron non return valve suitable for 250 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing complete all as specified and directed by Engr-in-Charge. |
| 111 | Supply and fix in replacement of cast iron non return valve suitable for 300 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing complete all as specified and directed by Engr-in-Charge. |
| 112 | Supply and laying DWC (Double wall corruguated) pipe 40/32 mm conforming to IS-14930/ IS-16205 for protection of earth strip/cable including necessary snap fit coupler reqd for fixing complete all as specified and directed by Engr-in-charge |
| 113 | Description all as per srl item No. 80.00 here-in-before but of size 63/50 mm. |
| 114 | Supply and fixing in replacement of motor cooling fan, manufactured from stainless steel (SS) of approved grade and workmanship, suitable for induction motor of rating 200/270 HP, duly balanced and compatible with the existing motor shaft. The cooling fan shall be of size, design, and specifications matching the existing/sample and ensuring proper airflow and effective cooling of the motor, including removal of the unserviceable fan and refixing of the new fan, proper alignment, checking for smooth and vibration-free operation, and trial run of the motor, complete all as specified and as directed by the Engineer-in-Charge. |
| 115 | Supply and laying of synthetic rubber insulated electrical safety mats, minimum 2.5 mm thick, suitable for use up to 11 kV, conforming to IS 15652, for electrical shock protection, anti-skid type, of size 2.0 m × 1.0 m, complete in all respects, all as specified and directed by the Engineer-in-Charge. |
| 116 | Providing and carrying out welding of any type (electric arc / gas welding) for fabrication, erection or repair of steel/MS/GI members, brackets, frames, supports, angles, flats, pipes etc. of any size and thickness, including surface preparation, alignment, welding consumables, finishing and all incidental works, complete, measured per stick/ filler rod / welding rod, all as specified and directed by the Engineer-in-Charge |
| 117 | Supplying and fixing RCC water pipeline route marker of milestone type, made out of reinforced cement concrete of approved quality, of standard market-available size upto 1000 mm height × 300 mm width × 100 mm thickness, with rounded top, painted with approved colour code for water pipeline, and provided with stencil-painted inscription indicating “WATER PIPELINE”, diameter of pipeline and other details as approved by the Engineer-in-Charge, including excavation, PCC bedding if required, embedding the marker minimum 300 mm below ground level, fixing vertically and firmly in position, finishing, painting, lettering and erection of old, complete in all respects, all as specified and as directed by the Engineer-in-Charge. |
| 118 | M & L for chemical spray using contact cleaner (DC 2.26 or equivalent), supplied in sealed container of 415 ml / 300 g, being a precision blended, multipurpose electrical contact cleaner, suitable for cleaning and maintenance of electrical and electronic components. The chemical shall be capable of penetrating and loosening stuck or rusted mechanisms, preventing corrosion, providing light lubrication, displacing and sealing out moisture, and improving electrical contact performance without leaving harmful residue. The item includes application at site as required for cleaning and protection of contacts, terminals, switches, relays, and similar components, complete all as specified and as directed by the Engineer-in-Charge. |
| 119 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised standard iron or steel all as specified or indicated in electrical plate no 3 of MES Part-I, including testing on completion including the material and labour of the following :-(a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1.(c) Precast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm.(d) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified. (e) 15 mm nominal bore light grade GI protection pipe 7.5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal.(g) Testing of earthing.Note : On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge. |
| 120 | M & L for painting of existing LT panel board / LT feeder pillar box, indoor or outdoor type, of size up to 2.0 × 1.50 × 0.60 metres, including inner shell and outer shell as well as angle iron frame, with Siemens Grey shade or matching the existing colour, as directed by the Engineer-in-Charge.The work includes thorough surface preparation by scraping, rubbing down with sand paper, wire brushing/grinding to remove loose paint, rusted and corroded particles; cleaning the surfaces with dry cloths to make them free from dust, grease, and foreign matter; repairing and making good uneven surfaces to achieve a smooth finish. The prepared surfaces shall then be treated with one coat of red oxide zinc chromate primer, followed by two coats of approved synthetic enamel paint, applied uniformly to obtain an even, smooth, and durable finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 121 | M & L for repairing of outer housing of existing LT panel board / LT feeder pillar box, indoor or outdoor type, of size up to 3.00 × 1.50 × 0.60 metres, fabricated out of 2.0 mm / 3.15 mm thick CRCA sheet, including inner shell and outer shell, complete, including repairing and/or replacement of damaged or deformed portions of outer shell panels, panel doors, MCCB housing doors, changeover housing doors, straightening, refabrication where required, repairing of angle iron frame, tightening and/or replacement of nuts, bolts, screws, clamps, hinges, locking arrangements, and making the housing structurally sound, rigid, and properly aligned. Making good all repaired surfaces, ensuring proper closing and locking of doors, alignment of housings, and restoring the panel to serviceable condition, complete all as specified and as directed by the Engineer-in-Charge.Note: The cost of replacement of minor parts and accessories such as doors, angle iron sections, nuts, bolts, screws, clamps, hinges, and similar items required for execution of the work shall be deemed to be included in the quoted rate. |
| 122 | M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipelines of 200 mm to 250 mm bore, by providing new lead using good quality jute spun yarn, including necessary excavation in any type of soil, bailing out of water, returning, filling-in and ramming of excavated soil in trenches, and making good all disturbed surfaces such as roads, floors and walls to match the existing finish, at any depth, complete, all as specified and as directed by the Engineer-in-Charge.Notes:(a) The contractor shall be fully responsible for carrying out all necessary excavation for jointing work, arranging required tools and plant, mechanical excavation (if required), manpower at site, and for making good all disturbed surfaces of roads, walls, floors, etc., to match the existing surface. The cost of the same shall be deemed to be included in the quoted rate.(b) Any extra fittings or additional length of pipe, if required, shall be measured and paid for separately.(c) Pig lead and jute spun yarn shall be measured and paid for separately under respective items of Schedule ‘A’. |
| 123 | M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipelines of 300 mm bore, by providing new lead using good quality jute spun yarn, including necessary excavation in any type of soil, bailing out of water, returning, filling-in and ramming of excavated soil in trenches, and making good all disturbed surfaces such as roads, floors and walls to match the existing finish, at any depth, complete, all as specified and as directed by the Engineer-in-Charge.Notes:(a) The contractor shall be fully responsible for carrying out all necessary excavation for jointing work, arranging required tools and plant, mechanical excavation (if required), manpower at site, and for making good all disturbed surfaces of roads, walls, floors, etc., to match the existing surface. The cost of the same shall be deemed to be included in the quoted rate.(b) Any extra fittings or additional length of pipe, if required, shall be measured and paid for separately.(c) Pig lead and jute spun yarn shall be measured and paid for separately under respective items of Schedule ‘A’. |
| 124 | Supply and fixing in replacement of motor terminal box complete assembly, consisting of terminal enclosure box (outer housing) and internal terminal block, of approved make and workmanship, suitable for induction motors of rating 200/270 HP, matching the existing make, dimensions, mounting arrangement, and specifications, including taking down and removal of the existing complete terminal box assembly (enclosure box along with internal terminal block), supply and fixing of new complete terminal box assembly including terminal studs, insulation base, gasket, cover, fixing hardware, and making all electrical connections properly includes checking, tightening, insulation verification, and ensuring the motor is ready for safe and satisfactory operation, complete all as specified and as directed by the Engineer-in-Charge. |
| 125 | Supply and fixing in replacement of motor terminal box complete assembly, consisting of terminal enclosure box (outer housing) and internal terminal block, of approved make and workmanship, suitable for induction motors of rating 75/100 HP, matching the existing make, dimensions, mounting arrangement, and specifications, including taking down and removal of the existing complete terminal box assembly (enclosure box along with internal terminal block), supply and fixing of new complete terminal box assembly including terminal studs, insulation base, gasket, cover, fixing hardware, and making all electrical connections properly includes checking, tightening, insulation verification, and ensuring the motor is ready for safe and satisfactory operation, complete all as specified and as directed by the Engineer-in-Charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
