|
| 1 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in hard/dense soil for laying/repair of water Pipe. |
| 2 | Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm thick. |
| 3 | Removing excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. |
| 4 | Supply in replacement, laying, jointing and leakage testing GI Pipe 50 mm bore medium grade (ISI marked) including all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches / floor/ walls etc complete all as specified and directed.Notes: (i) The laying and jointing of pipes are required to be carried out in short / long streches catering to specific requirements of a particular quarter, building block or a group of blocks.(ii) Excavation & earth work shall be measured & paid seperately under respective item of BOQ. |
| 5 | All as per item ser No 4 here in before but of size 25mm dia. |
| 6 | Refixing old steel tubing 25 dia and connections in new or old position all as specified and directed by engineer in charge. |
| 7 | Refixing old steel tubing 50 MM dia and connections in new or old position all as specified and directed by engineer in charge. |
| 8 | Taking down steel tubing 25 mm dia and connections all as directed by engineer in charge. |
| 9 | Taking down steel tubing 50 mm dia and connections all as directed by engineer in charge. |
| 10 | Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of size 50 mm dia GI Pipes all as per directed by Engineer in charge . |
| 11 | Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of size 25 mm dia GI Pipes all as per directed by Engineer in charge . |
| 12 | Cutting existing steel tubing for alterations or additions (Each cut measured) of size 50 mm dia GI Pipes all as per directed by Engineer in charge . |
| 13 | Cutting existing steel tubing for alterations or additions (Each cut measured) of size 25 mm dia GI Pipes all as per directed by Engineer in charge . |
| 14 | S&F in replacement of Gun metal Gate valve (ISI Marked) with iron wheel head, screwed both ends for iron pipe of the size 25 mm bore complete all as specified and directed. |
| 15 | All as per Ser item No 14.00 have above but 50 mm Bore. |
| 16 | M & L for dewatering from semi under ground sump 100000 Ltr capacity, cleaning internal walls, bottom surface of sump by removing scales and other foreign materials, scrubbing with water using coir jute brushes, washing the surfaces with mixture of bleaching powder and water. Finally washing with fresh water on walls, bottom surface etc applying two coats of white wash inside and outside as existing colour wash and writing letters( font Size 6 CM,Stencil type) on the wall i.e. capacity of tank, Date of cleaning, Due date for next cleaning, etc with synthetic enamel paint complete as specified and directed. |
| 17 | M & L for dewatering from Over head reservoir of 10000 ltrs capacity cleaning internal area by removing scales and other foreign materials, scrubbing with coir/ jute brushes using water, washing the surfaces with mixture of bleaching powder and water, finally washing with fresh water etc and write Date of cleaning, Due date for next cleaning, etc complete as specified and directed |
| 18 | M & L for taking down/removing u/s foot valve, supply and fix foot valve heavy duty 50 mm size of Brass body with screwed/flanged ends as required at site |
| 19 | Supply only chlorine test kit with coloured Sample complete with all testing filament and Two Reagent Namely Sodium chloride(100 ML) and sulphuric acid (75 EML) solution in rexine finish box all as specified and directed. |
| 20 | Supply and fix Chlorin dozing pump tube all as specified and directed ,Cat part No MCCP207-B of Declibec or Equivalent |
| 21 | Supply and Fix Chlorine dozing duckbill only all as specified and directed .Cat part No MCCVDBO of Declibec or Equivalent |
| 22 | Supply and fix NRV 50 mm dia,Class PN1.6,Cast iron body, flanged both ends for iron pipe of size 50 mm dia complete all as specified and directed Please Enable Macros to View BoQ information |
| 23 | Supply and fix NRV 50 mm dia,Class PN1.6,Cast iron body, flanged both ends for iron pipe of size 50 mm dia complete all as specified and directed Please Enable Macros to View BoQ information |
