|
| 1 | Taking down cement plaster of any description on PCC/stone surface/brick surfaces including raking out joints, hacking for key scrubbing down with water etc and removal of entire debris as ordered outside MoD land complete all as specified and as directed. |
| 2 | Dismantling boarding, any description, fixed in any position with nails complete all as specified & as directed. |
| 3 | Dismantling wall and ceiling board (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified and as directed. |
| 4 | Taking down chowkat or frame with shutters (including fittings & fixtures) area not exc 1.5 Sqm each (without taking off the shutters from the frame) of door/window including cutting holes for taking out hold fasts and making good the same including disturbed portion of jambs, cills, etc complete all as specified and as directed. |
| 5 | Taking down chowkat or frame with shutters (including grills, fittings & fixtures) area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) of door/window including cutting holes for taking out hold fasts and making good the same including disturbed portion of jambs, cills, etc complete all as specified and as directed. |
| 6 | Taking down shutters (including fittings & fixtures) of any description not exc 1 Sqm each, complete all as specified and as directed. |
| 7 | Taking down shutters (including fittings & fixtures) of any description exc 1 Sqm but not exc 2 Sqm each, complete all as specified and as directed. |
| 8 | Taking down shutter of any description not exceeding 1 Sqm each and refixing in same opening as ordered after other repair works are carried out including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as directed. |
| 9 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening as ordered after other repair works are carried out including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as directed. |
| 10 | Taking down aluminium door shutter of any description exc 1.2 Sqm but not exc 2.5 Sqm each and refixing in the same opening after necessary repair including changing all aluminium cleats/ screws and resecuring the door complete to the satisfaction of Engineer-in-Charge. |
| 11 | Taking down aluminium window shutter of any description not exc 1 Sqm each and refixing in the same opening after necessary repair including changing all aluminium cleats/ screws and resecuring the window complete to the satisfaction of Engineer-in-charge. |
| 12 | M&L for post construction Anti Termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litres per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same to match with the existing finish complete all as specified and as directed. |
| 13 | M&L for cutting holes in brick/stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as required including making good as per its original specification without any extra cost, not exc. half brick thick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall). |
| 14 | M&L for 16 to 18 mm thick granite (Jet Black) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin counter and the like, set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 15 | S&F Second class hard wood kiln seasoned, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed in position complete all as specified and as directed. |
| 16 | S&F factory made 35 mm thick second class hard wood plain framed panelled door shutter (any number of panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12mm thick veneered particle boards with commercial veneering on both face the size of rail and style as per IS - 1003 (Part I) kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified and as directed. |
| 17 | S&F factory made 35 mm thick second class hard wood glazed and skeleton door shutter open rebated and prepared to receive glass, guage etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a), kiln seasoned and chemically pressure treated, supplied and fitted to chowkats, complete all as specified and as directed. |
| 18 | S&F factory made 30 mm thick second class hard wood glazed and skeleton window shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (b), kiln seasoned and chemically pressure treated, supplied and fitted to chowkats complete all as specified and as directed. |
| 19 | S&F 30mm thick Flush shutter with solid core construction with block board core and ply wood face panels commercial type on both sides including external teak wood lipping 6mm thick fixed with nails, complete all as specified and as directed. |
| 20 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window / Ceosetory windows & other Frames/ Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: MS hold fast/ lugs/ SS dash fasteners shall be measured and paid for separately. |
| 21 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge. Note: Stainless steel butt hinges and necessary SS screws shall be measured and paid for separately. |
| 22 | S&F factory made Fibre Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 23 | S&F factory made 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 24 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Framing as per specification and drawing complete all as specified and as directed. |
| 25 | S&F 5mm thick Printed PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site, complete all as specified and as directed. |
| 26 | S&F 12 mm thick toughened glass door openable/ fixed/ sliding shutters (area of each shutter exc 1.5 sqm but n. exc 3 sqm) provided with & including 2 Nos stainless steel brackets for fixing each shutter, 2 Nos 25 mm dia stainless steel handles 600mm long of approved design, locking arrangements including floor spring, cutting/ drilling holes as required for fixing all fixtures complete all as specified and as directed. |
| 27 | S&F aluminium powder coated (minimum thickness of powder coating 50 micron) frames and shutters for doors, windows, ventilators & partitions, with one or more rebates including joining cleat for fixing, etc. complete all as specified and as directed. |
| 28 | S&F aluminium powder coated (minimum thickness of powder coating 50 micron) doors shutter, aluminium section weighing 1.00 Kg/m (minimum) including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated handles 2 Nos in each door, hinges, powder coated aluminum snap beading screws etc. complete all as specified and as directed.Note: Glass shall be measured and paid for seperately. |
| 29 | S&F in repairs aluminium powder coated (minimum thickness of powder coating 50 micron) Grill 6 mm thick and 75 x 75mm diagonal spacing fixed with necessary H/F/C channel etc all as per manufacturer's instructions complete all as specified and as directed. |
| 30 | S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed. |
| 31 | M&L for 12mm thick plywood, grade BWR, type BB, fixed with screw to timber frame work, complete all as specified and as directed. |
| 32 | M&L for 12mm thick prelaminated particle board (ISI marked), interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber/aluminium frame work complete all as specified & as directed. |
| 33 | S&F 200 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed. |
| 34 | S&F in repairs 200 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed. |
| 35 | S&F 125 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed. |
| 36 | S&F in repairs 125 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed. |
| 37 | S&F 100 mm size butt hinges, medium weight cold rolled mild steel and fixed . |
| 38 | S&F 75 mm size butt hinges, medium weight cold rolled mild steel and fixed . |
| 39 | S&F 100 mm size stainless steel butt hinges (ISI Marked), medium weight. |
| 40 | S&F 150mm size extruded aluminium alloy handles (ISI Marked), fabricated type, anodised and fixed. |
| 41 | S&F in repairs 150mm size extruded aluminium alloy handles (ISI Marked) fabricated type anodised and fixed. |
| 42 | S&F 125mm size extruded aluminium alloy handles (ISI Marked), fabricated type, anodised and fixed. |
| 43 | S&F in repairs 125mm size extruded aluminium alloy handles (ISI Marked) fabricated type anodised and fixed. |
| 44 | S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 45 | S&F in repairs 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 46 | S&F mild steel 300mm ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified & as directed. |
| 47 | S&F in repairs mild steel 300mm ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified & as directed. |
| 48 | Supply and fixing brass mortice lock, vertical type, size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium/wooden frame complete all as specified & as directed. |
| 49 | S&F gate and shutter, hooks and eyes, aluminium plate type II, 125 mm size. |
| 50 | S&F 80mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door as directed.Note :- Door stopper shall be conforming to the sample kept in GE’s office. |
| 51 | S&F in repairs 75mm hasp and staple, safety type of aluminium anodised with mild steel hinge pin, including bolts to hinge plate and fixed with screws complete all as specified and as directed. |
| 52 | S&F door closer aluminium (extruded section body), hydraulically regulated, designation No.3 universal type, suitale for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg and fixed complete all as directed.. |
| 53 | S&F in repairs door closer aluminium (extruded section body), hydraulically regulated, designation No.3 universal type, suitale for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg and fixed complete all as directed.. |
| 54 | S&F XPM design aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples along with wooden beads complete all as specified and as directed. |
| 55 | S&F in repairs XPM design aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples along with wooden beads complete all as specified and as directed. |
| 56 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 57 | S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 58 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 59 | S&F in repairs mild steel threaded 10mm dia tie rod exc 0.7 mtr but not exc 1.20 mtr long including all nut and bolts for aluminium framing work in doors etc complete all as specified & as directed. |
| 60 | S&F in repairs neoprene gasket of suitable size & profile for securing glass in aluminium door complete all as specified & as directed. |
| 61 | S&F in repairs stainless steel drapery rod of 25mm dia (in lengths as directed) with & including stainless steel decorative SS bulb type finial at both ends / SS end socket and pair of stainless steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam complete all as specified & as directed. |
| 62 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, framed signed boards, walk ways, railings, framework of water tanks and similar work including welding conforming to Fe.290 (Gde E-165), complete all as specified & as directed. |
| 63 | S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 64 | S&F 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre board with frame work with screws fixed to false ceiling with and including MS powder coated (white) snap Grid of size 605x605 mm frame work using 24mm x 32mm x 0.7mm main ‘Tee’ runner to be interlocked, 24mm x 32mm x 0.70mm cross ‘Tee’ and 24mm x 32mm x 0.70mm angles fixed to wall for ceiling including necessary supporting hanger with 2 to 3 mm dia GI wire (upto 3.5m long adjustable) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 24x7mm size 60mm long for securing frame work to ceiling suspended @ 1200mm centre to centre both way with PVC rawl plug with & including 6mm thick calcium silicate board as described fixing with clips etc. and ceiling board fixed as per manufacturer’s instructions, with & including painting the ceiling board with two coats of oil emulsion distemper (OBD) of approved shade over a coat of primer on ceiling with & including taking down existing electrical fittings/fixtures and wiring in ceiling and re-fixing the same to its original position or different locations, after completion of false ceiling work including testing on completion as ordered complete all as specified & as directed. |
| 65 | M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and as directed. |
| 66 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including 1mm thick layer of white cement based wall care putty complete all as specified & as directed. |
| 67 | Hacking out old broken glass (any thickness) and size from wooden frame glazed with putty or fixed with wooden beads complete all as directed. |
| 68 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads or fixed to aluminium sections not exceeding 0.5 Sqm in each pane complete all as specified & as directed. |
| 69 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads or fixed to aluminium sections not exceeding 0.5 Sqm in each pane complete all as specified & as directed. |
| 70 | S&F 5mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads or fixed to aluminium sections exceeding 0.5 Sqm in each pane complete all as specified & as directed. |
| 71 | S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified & as directed. |
| 72 | S&F 4mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane all as specified & as directed. |
| 73 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of 1st quality synthetic enamel paint of approved tint over a coat of pink primer complete all as specified & as directed. |
| 74 | M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of 1st quality synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified & as directed. |
| 75 | M&L for Kitchen cabinet with shutter complete in required sizes made out of 18 mm thick PVC board with one side decorative and other side white balancing lamination fixed with screws and adhesive, SS screws of 5.5 mm size, fixed as per manufacturer’s instructions and standard trade practice, complete all as specified and as directed |
| 76 | All same as per serial item No. 75 here-in-above, but both sides white lamination in CB shelves, partitions, sides, etc. |
| 77 | S&F stainless steel kitchen cabinet overlay/ L clip hinges complete all as specified and as directed. |
| 78 | S&F stainless steel handles 100 mm long fabricated type, bright polished decorative type fixed with brass screws. |
| 79 | S&F Stainless steel Magnetic catcher with striking plate fixed with screws, conforming to the sample kept in GE’s office, complete all as specified and as directed. |
| 80 | S&F 60 cm long stainless steel telescopic channels for sliding modular Kitchen racks/ drawers. Make: GODREJ / HETTICH / EBCO / ARROW or equivalent make as approved by GE. |
| 81 | S&F in repairs stainless steel modern plain/ cutlery basket of size 18\\"x20\\"x8\\" made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire complete all as described and as directed. Make: GODREJ / HETTICH / EBCO / ARROW or equivalent make as approved by GE. |
| 82 | S&F in repairs stainless steel modern Thali basket of size 18\\"x20\\"x8\\" made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire complete all as described and as directed. Make: GODREJ / HETTICH / EBCO / ARROW or equivalent make as approved by GE. |
| 83 | S&F in repairs stainless steel modern plain/ cutlery basket of size 18\\"x20\\"x6\\" made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire complete all as described and as directed. Make: GODREJ / HETTICH / EBCO / ARROW or equivalent make as approved by GE. |
| 84 | S&F in repairs stainless steel modern plain/ cutlery basket of size 18\\"x20\\"x4\\" made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire complete all as described and as directed. Make: GODREJ / HETTICH / EBCO / ARROW or equivalent make as approved by GE. |
| 85 | S&F in repairs stainless steel modern cup and saucer basket of size 18\\"x20\\"x4\\" made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire complete all as described and as directed. Make: GODREJ / HETTICH / EBCO / ARROW or equivalent make as approved by GE. |
| 86 | S&F in repairs stainless steel modern perforated cutlery basket of size 18\\"x20\\"x4\\" made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire complete all as described and as directed. Make: GODREJ / HETTICH / EBCO / ARROW or equivalent make as approved by GE. Please Enable Macros to View BoQ information |
