|
| 1 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick, as per the direction of Engineer-In-charge including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. |
| 2 | 15 mm cement plaster 1:6 (1 cement: 6 coarse sand) on rough side of single or half brick wall of mix: including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. |
| 3 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 4 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 5 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 6 | Painting with synthetic enamel paint of approved brand and manufactu re of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 7 | Providing and fixing Coloured anodised aluminium frames for door, window and ventilator and glazing partition extrusion section of Jindal/ Hindalco as per approved shade for door, window ,ventilator and partition with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides with required with PVC / neoprene filles etcetra aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete as per approved specifications, drawing and design including carriage of material with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, sale tax, toll tax , sales tax or other taxes imposed by the government. |
| 8 | Providing and fixing Coloured anodised aluminiun shutter of door , window and ventilator including providing and fixing hinges /pivots and making provision for fixing of fitting whe ever required including the cost of PVC / neoprene gasket as required extrusion section of Jindal/ Hindalco as per approved shade aluminum work for door, window ,ventilator and partition with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides with required with PVC / neoprene filles etc. aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleast angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete. 5.50mm thick glass pans of modi guard The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including of octroi, royality, Malkana, sale tax, toll tax , sales tax or other taxes imposed by the government. |
| 9 | Providing and fixing Coloured anodised aluminiun shutter of door , window and ventilator including providing and fixing hinges /pivots and making provision for fixing of fitting whe ever required including the cost of PVC / neoprene gasket as required extrusion section of Jindal/ Hindalco as per approved shade aluminum work for door, window ,ventilator and partition with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides with required with PVC / neoprene filles etc. aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleast angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete. Window fix glass 6 mm thick The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including of octroi, royality, Malkana, sale tax, toll tax , sales tax or other taxes imposed by the government. |
| 10 | Brick work with common burnt clay machine moulded perforated bricks With F.P.S.(non modular) bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 11 | Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the government. |
| 12 | Providing and fixing 300x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 13 | Providing and fixing 200x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 14 | Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 15 | Providing and fixing 100 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 16 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore. The rate including of octroi, royality, malkana, toll tax, GST or other taxes imposed by the government. |
| 17 | Providing and fixing P.V.C. 32 mm dia Flexible pipe waste pipe for sink or wash basin including P.V.C. waste fittings complete. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 18 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge .The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. . |
| 19 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government time to time. |
| 20 | Providing and fixing 15 mm nominal bore brass bib cock of approved quality including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 21 | Providing and fixing 15 mm nominal C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.ncluding carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 22 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 23 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250mm. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government . |
| 24 | Providing and fixing 15 mm nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. . |
| 25 | Providing and fixing 100 mm sand cast Iron grating for gully trap. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 26 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 27 | Providing and laying concrete for plain/ reinforced Cement concrete 1:2:4 (One Cement : Two Sand : four crushed stone aggregate) Nominal Mix, P.C.C. grade M-20 (M-Twenty) in open foundations complete as per drawing and technical specifications clause 802, 803,1202 & 1203 including carriage of materials with in all leads, lifts and other incidental .The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government time to time. |
| 28 | Stone Soiling Properly Hand Packed filling interstices with Kharanja stone and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding material moorum or earth etc.complete as per HPPWD Specification100mm spread thickness (finished work including materials and labour). The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government time to time. |
| 29 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government . |
| 30 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government time to time. |
| 31 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level.with cement mortar 1:4. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 32 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 33 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government time to time. |
| 34 | Providing and fixing 6 mm thick Cement bonded wood particle board as per IS:14276 plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 35 | Providing and fixing prepainted galvanised steel sheet roofing over steel trusses hot dip metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (TWENTY) microns over 5 (five) microns of primer back coat of polyster and 5 (five) microns coating fixed with J or L hooks bolts and nuts 8mm (eight milimeter) dia bitumen and GI limpet washer filled with required colour and laid completed as per direction of Engineer-In-charge 0.60mm (zero point sixty milimeter) thick polyster galvanised steel sheet of approved colour . The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 36 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges. The rate includes octroi, royality, Malkana, Tol tax, GST or any other taxes imposed by the Government. |
| 37 | Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 1.60 mm thick with zinc coating not less than 350 gm/m² including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. |
| 38 | Providing and fixing 19mm thick HDXMR Board water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete). The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the government. |
| 39 | Providing and fixing 19mm thick HDXMR Board water proof commercial board in shutters for cup board with butt joints & fixing with nails & screws etc complete). The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the government. |
| 40 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the government. |
| 41 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. The rate includes octroi,royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. Please Enable Macros to View BoQ information |
