|
| 1 | Dressing the ground including cutting and filling up to 15 CM in shape work in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 2 | Providing and laying cement concrete 1:4: 8 ( 1 cement :4 sand: 8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 3 | Providing and laying cement concrete 1:2:4 ( 1 cement :2 sand: 4 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 4 | Providing and laying heavy duty precast cement concrete Interlocking paver blocks having thickness 60 mm complete up to M-50 grade i/c border or kurb grey or coloured over sub base of sand with 25 mm thick average laid over i/c curing rubbing & polishing in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 5 | Excavation in foundation trenches etc. in earth work lift upto a lead of 1.5 metres stacking the excavated soil not more than 3 metres clear from the edge of excavated and then returning the stacked soil when required into plinth sides of foundation in 15 cm layers consolidating wach deposited layer by ramming and watering and then depositing of all surplus excavated materials as directed within a lead of 20 metres in all kind of works in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 6 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm.so as to give a fair finish including centering, shuttering, strutting and propping etc with wooden batens and ballies,height of propping and centring below supporting floor to celing not exceeding 4 mtrs and removal of the same for insitu- reinforced concrete & plain concrete work in: |
| 7 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like within all leads and lifts complete as per the direction of Engineer-in-charge. |
| 8 | Providing and laying cement concrete 1: 3 : 6 ( 1 cement :3 sand : 6 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 9 | Excavation in earth work and filling in 15 cm. layers in foundation & plinths including ramming, watering and consolidating in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 10 | Wiring for light/Fan point/Exhaust fan point/call bell point with 1.5 Sq.mm PVC insulated copper conductor cable in surface/recessed PVC conduct at required including carriage of all material in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 11 | Group \\"C\\" |
| 12 | Wiring for light/power plug with 2 x 4 Sq.mm PVC insulated copper conductor or single core cable in surface/recessed steel conduit alongwith 1 No. 2.24 mm dia bare copper wire for loop earthing as required including carriage of materials in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 13 | Wiring for circuit wiring with 2 x 2.5 Sq.mm PVC insulated copper conductor single core cable in surface/recessed steel conduit as required including carriage of material n all leads and lifts complete as per the direction of Engineer-in-charge. |
| 14 | Wiring for sub-main wiring with the following size of copper conductor single core cable in surface/recessed steel conduit as required including carriage of materials in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 15 | 2x6 Sq.mm |
| 16 | Supplying and fixing 5 Amps to 32 Amps rating 240 volts, G series miniature circuit breaker of following poles in the existing MCB, DB complete with connections testing and commissioning etc. as required in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 17 | Providing, installing, testing and commissioning of ceiling fan and regulator including wiring the rod of standard length (upto 30cm) with 1.5 Sqmm PVC insulated copper conductor single core cabe etc. as required sweep type in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 18 | Providing and fixing 1000 ltrs. Double layer sintex make water storage reservoir with top lid and making connection complete in all respect including all leads and lefts. |
| 19 | P/F Orrissa pattern viterous china W.C. squatting pan Indian type size 580 mm earth work bed complete ( Footrest to be measured & paid for separately) in all leads and lifts complete as per the direction of Engineer-in-charge |
| 20 | P/F low level water cistern 10 litrs in all leads and lifts complete as per the direction of Engineer-in-charge |
| 21 | Laying, jointing and testing in trenches GMS pipes(L/G) confirming to IS specification including commissioning and cost of all fittings in respect of following diameters in distribution system (Eath work in trenches to be measured and paid for separately) including entire carriage of material in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 22 | 65mm dia. |
| 23 | 100mm dia. |
| 24 | Dismentalling of old GMS pipes (light/Medium Grade) in existing distribution system where changing is required of following diameters including stacking of material at site in all leads and lifts and as per the direction of the Engineer-in-charge. |
| 25 | 65mm dia |
| 26 | Relaying , jointing and testing of GMS pipes ( light/Medium grade ) i/c commissioning and all fittings in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 27 | 65mm dia |
| 28 | Pdg. Circurmferntial Cutting joints to GMS pipe with two layers of cutting using 3mm and 4mm dia.electrodes after levelling the pipe ends according to relevent ISI Specification & in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 29 | ( 65mm dia) |
| 30 | Pdg. Circurmferntial butt welding joints to GMS pipe with three layers of welding using 3mm and 4mm dia.electrodes after levelling the pipe ends according to relevent ISI Specification & in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 31 | ( 65mm dia) |
| 32 | ( 100mm dia) |
| 33 | Providing and fixing C.I sluice valve ( with hand wheel ) of Leader/Kirloskar/ /Kartar/BIR make capable of with standing the normal seat pressure and as per IS 780-1984 including brass spindle complete with latest ammendments class PN 1.00 complete in all respect. in all leads and lifts complete as per the direction of Engineer-in-charge. |
| 34 | 100 mm dia. |
| 35 | 65 mm dia. |
| 36 | Demolition below G.L. upto 1.50 Metres depth and disposal of un serviceable materials within 20 metres lead Un- reinforcement Cement Concrete more than 15cm thick in all leads and lifts complete as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
