|
| 1 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. Hard Roack blasting prohibited and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site, according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at approved dumping site Bharyal. including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required).All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation the usefull stones as per the direction of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings bases of columns etc for mass concrete including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 3 | Suspended floors, roofs landings balconies and access platfrom including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 4 | Random rubble masonary with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 garded stone aggreate 20 mm nominal size) upto plinth level with : Cement Motor 1:6 ( 1 cement : 6 coarse sand)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand): 8 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 6 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:1½:3 (1 cement : 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class D/wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 11 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 40 mm thick 2nd Class D/Wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 12 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 13 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 14 | Providing and fixing aluminium Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 125 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 15 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 16 | Stone filling behind retaining walls & B/wall :including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 17 | Providing and laying vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 19 | White glazed tiles 6 mm thick in skirting risers of steps and dado12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed withcement slurry including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 20 | 6 mm cement plaster to celling in cement mortar 1:3 (1 Cement :3 sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 21 | 15 mm cement plaster in single coat on Rough side of brick/Concrete /stone walls for interior plastering up to all floor level including arises internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth in cement motar 1:6 (1 cement : 6 Sand) |
| 22 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 24 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: water thinable cement primer including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 25 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 26 | Finishing walls with weather proof water based acrylic Emulsion of apex asian paint/Nerolac paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 Sqm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 27 | P/L G.I Pipe 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 28 | P/F PVC Connection pipe 15 mm dia 45 cm long with Brass Union for wash basin & Sink including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 29 | Providing and fixing water closet squatting pan (European type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 30 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 31 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 32 | Providing and fixing 10 liters vitreous china low level flushing cistern with a pair of C.I or mild steel brackets complete with flushing such as lead valve less syphon, 15 mm nominal size brass ball valve with polythene float CP brass handle unions and coupling for connections with inlet outlet and overflow pipes 40 mm dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe is to be measured and paid separately) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 33 | Providing and Fixing 32 mm dia PVC waste pipe for wash basin or sink including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 34 | Providing and fixing 600x450mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground fixed to wooden with C.P. Brass screws and washers complete including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 35 | P/F G.I / M.I union (15 mm nominal bore) (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 36 | P/F CP Brass Bib Cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 37 | P/F CP Brass Stop Cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 38 | Providing and fixing brass Pillar Tap for approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 39 | Providing and fixing CP brass soap dish with CP brass bracket fixed to wooden cleats with brass screws chrome plate including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 40 | Providing and fixing CP Brass towel rail complete with CP brass bracket fixed to wooden plug with CP Brass Chrome plate including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 41 | Providing and fixing Brass Ball Valve 15 mm dia nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 42 | Providing and fixing PVC water storage tank syntax or equivalent three layer cost of connecting / tank nipples , making connection etc. 1000 litres capacity including all assecories.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 43 | P/F P.V.C. floor trap 75 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 44 | P/F PVC Connection pipe 15 mm dia 45 cm long with Brass Union for wash basin & Sink including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 45 | Providing and fixing PVC pipes 110 mm dia (Heavy duty B Type) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 46 | Providing and fixing PVC pipes 75 mm dia (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 47 | P/F P.V.C. Door bend 110 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 48 | P/F P.V.C. Door bend 75 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 49 | P/F PVC Collar 110 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 50 | P/F PVC Collar 75 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 51 | P/F PVC Plain Bend 110 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 52 | P/F PVC Plain Bend 75mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 53 | Providing and fixing CP/ S.S grating 100 mm dia Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 54 | Constructing manhole with R.C.C top slab in 1:2:4 mix ( 1 cement :2 sand:4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement :4 sand :8 graded stone aggregate 40mm nominaLl size), inside plastering 15mm thick with cement mortar 1:3( 1 cement :3 sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement :2 sand :4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing : with 200mm thick walls of brick masonary of approved quality in cement mortar 1:3 ( 1 cement :3 Sand)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 55 | Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1:Cement:4 coarse sand) with precast R.C.C verticalgrating complete as per standard design including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 56 | Providing and fixing Brass Ball Valve 15 mm dia nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 57 | Providing and fixing PTMT Ball Cock of approved quality colour and make complete with Epoxy coated aluminium rod with Plastic Ball including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
