|
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 (fifty) metres lead and as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, rchitrave, holdfasts and other attachments etc. complete and stacking within 20 metres lead : not exceeding area 3(three) sq. metres and below. The rates are inclusive octroi , royality , Malkana, toll tax , GST or other taxes imposed by the Government |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( one cement : one and half coarse sand : three graded stone aggregate 20 mm(twenty millimetre) nominal size). In foundation footing bases of columns and the like and mass concrete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . |
| 6 | Steel reinforcement for R.C.C. work made of Tata/Tiscon /Sail including straightening, cutting, bending, placing in position and binding all complete above plinth level Hard drawn steel bars of grade Fe-500D or more including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 7 | Shotcreting R.C.C. columns, beams and slabs etc. 50mm(fifty millimeter) thick in Grade M 25(twenty five) with cement content not less than 330 kg (three hundred thirty kilogramme) per cum in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 8 | Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of “L” shaped mild steel shear key welded withexisting reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. |
| 9 | Providing and laying integral cement based treatment for Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm(zero point four eight eight kilogramme per square metre) mixed with water proofing cement compound @ 0.253 kg/sqm.(zero point two five three kilogramme per square metre)(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(ten centimetre)(c) third layer of 1.5 mm(one point five millimetre) thickness consisting of slurry of cement @ 1.289 kg/sqm (one point two eight nine kilogramme per square metre) mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm.(one point two eight nine kilogramme per square metre) This will be allowed to air cure for 4(four) hours followed by water curing for 48(forty eight) hours. The entire treatment will be taken upto 30 cm(thirty centimetre) on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in Cement mortar 1:6 (one cement : six coarse sand) in foundation and plinth including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 11 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) Second class teak wood complete including entire carriage of material within all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 12 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately,all complete 35 mm (thirty five millimetre) thick shutters Second class deodar wood as per direction of Engineer-in charge. (Note:- Butt hinges and necessary screws shall be paid separately) as per the direction of Engineer-in-Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 13 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm (four millimetre) thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class teak wood 35 mm (thirty five millimetre) thick including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government. |
| 14 | Providing and fixing M.S. (Mild steel) grills of require pattern in wooden/steel frames of windows etcetra with Mild Steel Flats square of round bar etc. including priming coat with approved steel primer all complete all fixed to openings /wooden frames with rawl plugs screws etc as per Drawing and Techanical Specifications including entire carriage of materials within all leads, lifts and other incidentals, as per approved and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 15 | Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary: Plain Glass: 4mm (four millimetre)thick. as per direction of Engineer-in- Charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 16 | Providng and fixing 125mm ( one hundred twenty five millimeter) aluminium handless, ISI(Indian Standards Institute) marked, anodised(anodic coating not less than grade AC10 (ten) as per IS:1868 (Indian standerd :one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etctra. Complete: including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 17 | Providng and fixing 100mm ( one hundred millimeter) aluminium handless, ISI(Indian Standards Institute) marked, anodised(anodic coating not less than grade AC10 (ten) as per IS:1868 (Indian standerd :one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etctra. Complete: including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 18 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10mm( one hundred fifty into ten millimetre) as per the direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 19 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10mm( one hundred into ten millimetre) as per the direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 20 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250×16mm( two hundred fifty into sixteen millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 21 | Providing and laying 15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 (one cement : six coures sand) as per the direction of Engineer-in-Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 22 | Providing and laying 6 mm (six millimetre) cement plaster of mix 1:3 (one cement : thre fine sand) including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 23 | Providing and laying 15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:3 (one cement : three coures sand) as per the direction of Engineer-in-Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 24 | Providing and applying plaster of paris putty of 2 mm(two millimeter)thickness over plastered surface to prepare the surface even and smooth complete. as per the direction of Engineer-in-Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 25 | Finishing walls with 100% (Hundred percent) Premium acrylic emulsion paint having VOC (volatile ogranic compound) less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 sqm (One point forty three litre per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (Zero point nine zero litre per ten square metre) (ASIAN/NEROLAC/ICI-DULUX) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 26 | Painting with synthetic enamel wood paint of approved brand and manufacture to give an even shade : Two or more coats on new work including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate of three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etc., complete size 600x600mm (six hundred into six hundred millimetre) as per direction of the Engineer- in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government. |
| 28 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimetre) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (at the rate three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete as per direction of the Engineer- in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government. |
| 29 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) one piece with seat and lid, 10(ten) litre low level white P.V.C. flushing cistern, of approved brand Jagwar Hindware/ Cera including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per the direction of Engineer-in-Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 30 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm (one hundred millimetre) sand cast Iron P or S trap, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C.pan of size 580x440 mm (five hundred eighty into four hundred fourty millimetre) with integral type foot rests and as per direction of the Engineer-In -Charge Complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 31 | Providing and fixing White Vitreous China Wash basin size 630x450 mm (six hundred thirty into four hundred fifty millimetre) with a single of 15 mm (fifteen millimetre) C.P. brass pillar taps , 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, Cera / Hindware Jaguar including painting of fittings and brackets, cutting and making good the walls wherever require including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 32 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 33 | Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (Modi gaurd/ Atul/ Cera make (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 34 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm(fifteen millimetre) nominal bore Jal, Hindware or Cera as per the direction of Engineer-in-Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 35 | Providing and fixing 15 mm (Fifteen milimetre) C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 two- way bib cock with wall flange twin elbow valve faucet of quality and make as approved by the Engineer in Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 36 | Providing and fixing 15mm(fifteen millimetre) nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(six hundred ninety grams) 15 mm(fifteen millimetre) nominal bore Jal, Hindware or Cera as per the direction of Engineer-in-Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 37 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Sintex make including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 38 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc Internal work - Exposed on wall 15mm (fifteen millimetre) nominal bore including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . |
| 39 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc Internal work - Exposed on wall 20mm (twenty millimetre) nominal bore including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . |
| 40 | Earth work in excavation for all type of road structure such as retaining walls ,breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil . ordinary rock, hard rock, chiseling/ wedging out of rock (where blasting is prohibited ) as per drawings and M.O.R.D technical specification clause 305-1 and as per direction of the Engineer-in- Charge including setting out, construction of shoring and bracing removal of stumps and other deleterious materials and disposal of materials upto any leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm(one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water ( surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 41 | Providing and laying cement concrete 1:5:10 mechanically mixed (one cement : Five sand : ten graded crushed / broken stone aggregate 40mm (forty millimetre nominal size) and curing complete including the cost of form work with M.S plates for plain concrete on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths. In retaining walls / breast walls as per drawing and technical specifications clause 802,803,1202and 1203 and as per direction of Engineer-in- Charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government . |
| 42 | Providing weep holes in brick masonry / stone masonry /plain and reinforced concrete abutment , wing wall ,return wall ,retaining and breast wall with 110mm (one hundred ten millimetre) dia PVC pipe (D-plast)/ Finolex/ Supreme having working pressure not less than 4 kg per centimeter square (Four Kilogram per centimeter square ) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification clause 614, 709, 1204.3.7 as per direction of Engineer-in- Charge including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
