|
| 1 | Arresting of leakages of G.I pipe network comprising of supply mains, Sub mains and distribution system at spots including trench excavation manually or by mechanical means if required at site for all kinds of soils strata/ road cutting/ordinary rock, with all leads and lifts. Providing and fixing of spun yarn with wood packing for tightening of leaking joints, setting right the profile of the joint including cost of dewatering if required at site, refilling of the trenches with available soil and consolidating each deposited layer by ramming and watering (complete job) |
| 2 | 80 mm to 150 mm nominal bore |
| 3 | 50 mm to 65 mm nominal bore |
| 4 | 20 mm to 40 mm nominal bore |
| 5 | Arresting of leakages of D.I mains, sub mains at spots including trench excavation manually or by mechanical means if required at site, for all kinds of soil Strata/ road cutting/ordinary rock, including all leads and lifts, providing and fixing of spun yarn with wood packing for tightening of leaking joints, setting right the profile of the joint and including cost of dewatering if required at site, refilling of the trenches with available soil and consolidating each deposited layer by ramming and watering (complete job) |
| 6 | Up to 150 mm nominal bore |
| 7 | Above 150 mm up to 300 mm nominal bore. |
| 8 | Above 300 mm nominal bore |
| 9 | Arresting of leakages of C.I mains, sub mains at spots including trench excavation manually or by mechanical means if required at site, for all kinds of soil Strata/ road cutting/ordinary rock, including all leads and lifts, providing and fixing of spun yarn with wood packing for tightening of leaking joints, setting right the profile of the joint and including cost of dewatering if required at site, refilling of the trenches with available soil and consolidating each deposited layer by ramming and watering (complete job) |
| 10 | Up to 150 mm nominal bore |
| 11 | Above 150 mm up to 300 mm nominal bore. |
| 12 | Above 300 mm nominal bore |
| 13 | Construction of anchor/saddle blocks of required size with necessary clips, nuts bolts of 1 : 2 : 4 Cement concrete with all carriages, form work Complete job as per instructions of engineer in Charge |
| 14 | Providing, manufacturing, fabricating and fixing in position duly welded MS Pipe specials of various nominal bore and of required size, with all leads and lifts and carriages of all types to material and equipment required as per strict instructions of Engineer in Charge complete job. |
| 15 | Welding of leaking joints /Cracked sports to G.I pipes of various nominal bore or where ever necessary to the installations including cost of welding rods as per requirement all inclusive, the job includes the running, handling, re handling charges and all carriage charges of all equipment in all terrains of site of work and in all conditions of weather and prevailing situations complete job as per requirement and instructions of Engineer in charge. |
| 16 | Removing blockades from G.I supply mains, sub mains and distribution system or Defrosting of the same in all conditions including cost of removing of pipes with earth work of all sorts up to required depth and refitting/relaying of the pipes and re filling of trenches with the available earth complete as per instructions of Engineer in charge complete job |
| 17 | Re threading of G.I Pipes with all leads and lifts and carriages complete job as per instructions of Engineer in Charge: |
| 18 | 20 mm nominal bore |
| 19 | 25 mm nominal bore |
| 20 | 40 mm nominal bore |
| 21 | 50 mm nominal bore |
| 22 | 65 mm nominal bore |
| 23 | 80 mm nominal bore |
| 24 | 100 mm nominal bore |
| 25 | Providing and fixing of M.S. Flanges 12mm thick to various dia’s of G.I pipes including welding of flanges to the pipes ends, Insertion of rubber gaskets, fixing of M.S nuts and bolts of required dia as per direction of site engineer, including cost of carriage of materials, handling re handling charges and Gen Set & welding sets required at site and also testing of pipes (Complete job as per strict instructions of Engineer in charge) |
| 26 | 100mm dia G.I pipe |
| 27 | 80mm dia G.I pipe |
| 28 | 65 mm dia G.I pipe |
| 29 | 50mm dia G.I pipe |
| 30 | Replacing of old worn out MS flanges by new ones of 12 mm thick with all welding charges, nuts and bolts, rubber gasket insertions in all conditions, the job shall include all equipment charges like Gen set and welding accessories with all leads and lifts, carriages of all sorts all inclusive complete job as per instructions of Engineer in charge. |
| 31 | 150 mm nominal bore. |
| 32 | 100 mm nominal bore. |
| 33 | 80 mm nominal bore. |
| 34 | 65 mm nominal bore. |
| 35 | 40 mm nominal bore. |
| 36 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc (not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth up to 1.5mtr including disposal of excavated earth up to 1 meter from cutting edge, disposed earth is to be leveled and neatly dressed in : All kinds of soil |
| 37 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc (not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth up to 1.5mtr including disposal of excavated earth up to 1 meter from cutting edge, disposed earth is to be leveled and neatly dressed in : Ordinary rock |
| 38 | Earth work in excavation by mechanical means (Hydraulic Excavator) in foundation trenches, trenches, drains, pipes and cables etc; (not exceeding 1.5 mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 mtr including getting out excavated soil and dispoal of surplus soil as directed within a lead of 50 mtr. |
| 39 | All kinds of Soil |
| 40 | Excavation in water bound macadam road including stacking of serviceable and un serviceable material separately and disposal of unserviceable material lead upto 50 m and lift up to 1.50 m, disposed material to be neatly dressed |
| 41 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 42 | Repairs to sluice valves by way of opening out of different parts incld. oiling/gracing and providing and fixing of rubber packing/washers/nuts/bolts and change of worn out check nuts/spindle rods wherever necessary complete job as per instructions of Engineer in Charge. |
| 43 | 100mm dia |
| 44 | 150mm dia |
| 45 | 200mm dia |
| 46 | 250mm dia |
| 47 | 300mm dia |
| 48 | Repairs to air valves incl. change of worn out bolts /rubber washers with necessary adjustments for air vent all complete incl. handling, re handling and making necessary plate form for execution of the job. complete job all inclusive as per instructions of Engineer in Charge. |
| 49 | 65mm dia |
| 50 | 80mm dia |
| 51 | 100mm dia |
| 52 | 150mm dia |
| 53 | Removal of blockades/arresting of leakages including earth work at spots incl. cutting of pipes dewatering, insertion of double collars and spun yarn and testing of joint all complete including cost of G.I double collar to be provided by the Deptt. complete job. |
| 54 | 150mm dia G.I D.I/C.I |
| 55 | 200mm dia D.I/C.I |
| 56 | 250mm dia D.I/C.I |
| 57 | 300mm dia D.I/C.I |
| 58 | Providing and fixing of C.I double acting air valve of approved quality with bolts, nuts, rubber insertions etc; incl. tail pieces, tapers etc.Complete as per site requirement |
| 59 | 100 mm dia. |
| 60 | 80 mm dia. |
| 61 | 50 mm dia. |
| 62 | Dismantling C.I pipes including excavation and refilling trenches after taking out the pipes manually/by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of engineer in charge. |
| 63 | Up to 150 mm diameter |
| 64 | Above 150 mm dia. Up to 300 mm dia. |
| 65 | Above 300 mm diameter. |
| 66 | Dismantling C.I pipes excluding excavation and refilling trenches after taking out the pipes manually/by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of engineer in charge(excluding earth work) |
| 67 | Up to 150 mm diameter |
| 68 | Above 150 mm dia. Up to 300 mm dia. |
| 69 | Above 300 mm diameter. |
| 70 | Dismantling G.I. pipes (external work) including excavation and refillingtrenches after taking out the pipes, manually/by mechanical meansincluding stacking of pipes within 50 meters lead as per direction ofEngineer-in-charge |
| 71 | 15 mm to 40 mm nominal bore |
| 72 | Above 40 mm nominal bore |
| 73 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 meters. |
| 74 | Up to 150 mm diameter |
| 75 | Above 150 mm diameter |
| 76 | Laying in position centrifugally cast (Spun) iron S&S or flanged pipes (excluding cost of pipes) |
| 77 | Providing lead caulked joints to spun iron or C.I. pipes and specials incl. testing of joints but excluding the cost of pig lead. |
| 78 | 100 mm dia. Pipe |
| 79 | 150 mm dia. Pipe |
| 80 | 200 mm dia. Pipe |
| 81 | 250 mm dia. Pi[pe |
| 82 | 300 mm dia. Pipe |
| 83 | Welding by gas plant including transportation of gas welding plant at site etc, complete |
| 84 | Welding by electric plant including transportation of electric welding plant at site etc, complete |
| 85 | Silt clearance in canals, intake channels, sumps and the like in all conditions of topographic of soil conditions and altitudes of exaction and dumping of excavated material and in all conditions of weather and circumstances by using pock lain excavator of all altitude excavating arms with all leads and lifts including carriage of the Pock lain to and fro complete job in all respects, with fuel and maintenance charges of the pock lain with skilled and non skilled supervisory staff all inclusive , nothing extra can be paid in any case or disposed earth to be leveled and neatly dressed: |
| 86 | Earth work in excavation by mechanical means (Hyd. Excavator) over areas (exceeding 30cm in depth 1.5 mtr. in width as well as 10 sqm. plan) including disposal of excavated earth lead upto 50 mtr. and lift upto 1.5 mtr. disposed earth to be leveled and neatly dressed: |
| 87 | In all kinds of soils |
| 88 | Ordinary rock |
| 89 | Providing/ laying and fitting including sucessful testing and jointing of G.I pipes ( as per JS:1239 of 2004 and latest ammendments thereof) complete with fittings excluding trenching and refilling etc ( external work) but including all carriages upto site of work complete Job. |
| 90 | 100 mm dia GI pipes |
| 91 | 80 mm dia GI pipes |
| 92 | 65 mm dia GI pipes |
| 93 | 50 mm dia GI pipes |
| 94 | 40 mm dia GI pipes |
| 95 | 25 mm dia GI pipes |
| 96 | 20 mm dia GI pipes |
| 97 | 15 mm dia GI pipes |
| 98 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. |
| 99 | 100 mm dia GI pipes |
| 100 | 80 mm dia GI pipes |
| 101 | 65 mm dia GI pipes |
| 102 | 50 mm dia GI pipes |
| 103 | 40 mm dia GI pipes |
| 104 | 25 mm dia GI pipes |
| 105 | 20 mm dia GI pipes |
| 106 | PP-R PIPES AND FITTINGSProviding and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. Thisincludes testing of joints complete as per direction of Engineer-incharge.Internal work-exposed on wall with clamps at 1.00 meterspacing |
| 107 | PN-16 pipe, 16mm OD(SDR-7.4) |
| 108 | PN-16 pipe, 20mm OD(SDR-7.4) |
| 109 | PN-16 pipe, 25mm OD(SDR-7.4) |
| 110 | PN-16 pipe, 32mm OD(SDR-7.4) |
| 111 | PN-16 pipe, 40mm OD(SDR-7.4) |
| 112 | PN-16 pipe, 50mm OD(SDR-7.4) |
| 113 | PP-R PIPES AND FITTINGSProviding and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. Thisincludes testing of joints complete as per direction of Engineer-incharge.External work including trenching, refilling etc. |
| 114 | PN-16 pipe, 16mm OD(SDR-7.4) |
| 115 | PN-16 pipe, 20mm OD(SDR-7.4) |
| 116 | PN-16 pipe, 25mm OD(SDR-7.4) |
| 117 | PN-16 pipe, 32mm OD(SDR-7.4) |
| 118 | PN-16 pipe, 40mm OD(SDR-7.4) |
| 119 | PN-16 pipe, 50mm OD(SDR-7.4) |
| 120 | Providing and fixing PPR Unions including all carraiges complete |
| 121 | 50mm dia |
| 122 | 40mm dia |
| 123 | 25mm dia |
| 124 | Providing and fixing C.I. double acting air valve of approved qualitywith bolts, nuts, rubber insertions etc. complete (The tail pieces, tapersetc. if required will be paid separately). |
| 125 | 100 MM Dia |
| 126 | 80 MM Dia |
| 127 | 50 MM Dia |
| 128 | Fixing of Mechanical Collars |
| 129 | 300mm Dia |
| 130 | 250 mm Dia |
| 131 | 200mm Dia |
| 132 | 150 mm Dia |
| 133 | 100mm Dia |
| 134 | 50 mm Dia |
| 135 | Providing and Fixing of MS Clips to hold the pipes including installation and all necessary screws complete |
| 136 | 300mm Dia |
| 137 | 250 mm Dia |
| 138 | 200mm Dia |
| 139 | 150 mm Dia |
| 140 | 100mm Dia |
| 141 | 50 mm Dia |
| 142 | Hire charges of Mechanical Excavator (JCB) along with Commercial driver licensed including POL and all maintainence complete. |
| 143 | Hire charges of Tanker/ Tractor with tank capacity of Minimum 2000 Ltrs along with Commercial driver licensed including POL and all maintainence complete. |
| 144 | Hire charges of Motor for Dewatering purposes along with fuel and all other Accesories complete Job. |
| 145 | Providing and Fixing of Shayamina Tents with Carpet furnishing with size 20x30 Ft at various locations of District Budgam |
| 146 | Providing refreshment to the participants on occasion of training/ Function. |
| 147 | Biryani with water |
| 148 | Tea with Biscuit |
| 149 | Supplying and providing 500 Ml Mineral water bottles including all carriages complete Job |
| 150 | Supplying and providing 1000 Ml Mineral water bottles including all carriages complete Job |
| 151 | Printing Of documents A4 size with spiral binding . |
| 152 | Providing and Fixing of PVC pipe of 20mm Dia and 100 Ft long with all carriages complete |
| 153 | Hire Charges of Load carrier medium Size along with driver licensed including POL and all Maintainance charges complete for an average lead of 60 KMs |
| 154 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 155 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade.Two or more coats on new work |
| 156 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 157 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)in foundation and plinth . |
| 158 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 159 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 160 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 161 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 162 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class Deodar wood |
| 163 | Providing and fixing panelling or panelling and glazing in panelled or panelled nd glazed shutters for doors, windows and clerestory windows (Area of pening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40. 2nd class deodar wood |
| 164 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm or doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. (35 mm).2nd class Deodar Wood, |
| 165 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. |
| 166 | Providing / fixing of hinges of sizes ,handles,haldarwazs ,latches including screws of all sorts .complete job |
| 167 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 168 | Providing and fixing 1st quality ceramic glazed tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 169 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 170 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 171 | Supply ,Installation of invertor upto 900 VA/12V ,supporting 1 water battery of 12V high performance with 1 year warranty complete job |
| 172 | Providing and Fixing of Invertor battery of approved brand and make complete job. |
| 173 | 100 AH |
| 174 | 150 AH |
| 175 | 200 AH |
| 176 | Hire Charges of Load carrier medium Size along with driver licensed including POL and all Maintainance charges complete for an average lead of 60 KMs |
| 177 | Filling available excavated earth excluding rock in trenches, plinth, sides of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead up to 50m and lift up to 1.5m. |
| 178 | Dismantling GI pipes (external work) incld. excavation and refilling trenches after taking out the pipes, manually / by mechanical means incld. stacking of pipes within 50 mtrs lead: |
| 179 | Above 40 mm nominal bore |
| 180 | 15 - 40 mm nominal bore |
| 181 | Providing push – on – joints to centrifugally (spun) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket |
| 182 | 100 mm dia pipes |
| 183 | 150 mm dia pipes |
| 184 | 200 mm dia pipes |
| 185 | 250 mm dia pipes |
| 186 | 300 mm dia pipes |
| 187 | 400 mm dia pipes |
| 188 | 450 mm dia pipes |
| 189 | Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel & new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve |
| 190 | Providing / fixing of M.S double collers/ arresting of leakages by way of welding including all sorts of carriages |
| 191 | 80 mm dia |
| 192 | 100 mm dia |
| 193 | 150 mm dia |
| 194 | 200 mm dia |
| 195 | Providing / fixing of double collers, G.I./ M.S. for arresting of leakages by using led & spun yarn incld. earthwork excavation, refilling etc. including all sorts of carriages (length verying from 0.60 to 1 Mtr.) |
| 196 | 40 mm dia |
| 197 | 50 mm dia |
| 198 | 65 mm dia |
| 199 | 80 mm dia |
| 200 | 100 mm dia |
| 201 | 150 mm dia |
| 202 | 200 mm dia |
| 203 | Providing and fixing including testing, commissioning & fabricating at site M.S pipe Specials incld. M.S flanges made out of 6 mm thick M.S sheet including cost of flanges 12mm thick Nuts, Bolts, washers etc & all sorts of carriages upto site of work, as per requirement at site complete job. |
| 204 | Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job. |
| 205 | Lighting points |
| 206 | Heating points |
| 207 | Supply of pipe specials from open market, if not available in the Divisional stores (available supplies if any has to be lifted from the Divisioanl stores). Make of NIKE; NEW; LINK & UNIFIX |
| 208 | 100 mm dia G.I Union |
| 209 | 80 mm dia G.I Union |
| 210 | 65 mm dia G.I. Union |
| 211 | 50 mm dia G.I. Union |
| 212 | 40 mm dia G.I. Union |
| 213 | 25 mm dia G.I. Union |
| 214 | 20 mm dia G.I. Union |
| 215 | 15 mm dia G.I. Union |
| 216 | 80 mm dia G.I. Elbow |
| 217 | 65 mm dia G.I. Elbow |
| 218 | 50 mm dia G.I. Elbow |
| 219 | 40 mm dia G.I. Elbow |
| 220 | 25 mm dia G.I. Elbow |
| 221 | 20 mm dia G.I. Elbow |
| 222 | 80 mm dia G.I. Socket |
| 223 | 65 mm dia G.I. Socket |
| 224 | 50 mm dia G.I. Socket |
| 225 | 40 mm dia G.I. Socket |
| 226 | 25 mm dia G.I. Socket |
| 227 | 20 mm dia G.I. Socket |
| 228 | 80 mm dia G.I. Nipple upto 10\\" |
| 229 | 65 mm dia G.I. Nipple upto 10\\" |
| 230 | 50 mm dia G.I. Nipple upto 10\\" |
| 231 | 40 mm dia G.I. Nipple upto 10\\" |
| 232 | 25 mm dia G.I. Nipple upto 10\\" |
| 233 | 20 mm dia G.I. Nipple upto 10\\" |
| 234 | 15 mm dia G.I. Nipple upto 10\\" |
| 235 | 25x25x20 mm dia G.I. Equal Tee |
| 236 | 40x40x25 mm dia G.I. Equal Tee |
| 237 | 50x50x40 mm dia G.I. Equal Tee |
| 238 | 65x65x50 mm dia G.I. Equal Tee |
| 239 | 80x80x65 mm dia G.I. Equal Tee |
| 240 | 25x20 mm dia Socket/ Reducer |
| 241 | 40x25 mm dia Socket/ Reducer |
| 242 | 50x40 mm dia Socket/ Reducer |
| 243 | 65x50 mm dia Socket/ Reducer |
| 244 | 80x65 mm dia Socket/ Reducer |
| 245 | 25x20 mm dia Elbow/ Reducer |
| 246 | 40x25 mm dia Elbow/ Reducer |
| 247 | 50x40 mm dia Elbow/ Reducer |
| 248 | 65x50 mm dia Elbow/ Reducer |
| 249 | 80x65 mm dia Elbow/ Reducer |
| 250 | Supply of Kerosene |
| 251 | Re-threading of damaged pipe ends including carriage from site to workshop and back. |
| 252 | 20 mm dia |
| 253 | 25 mm dia |
| 254 | 40 mm dia |
| 255 | 50 mm dia |
| 256 | 65 mm dia |
| 257 | 80 mm dia |
| 258 | Dismentalling of backwash motors/ Alum motors/ bleaching motors of filtration plants by way of rewinding of core made out of copper metal fiber superior type of required thickness and guage. The job includes replacing of bearings, water seal, nuts, bolts, rubber washers and painting of instruments. The job also includes all sorts of carriage from site to work upto workshop to & fro including testing & commissioning of following capacity. |
| 259 | For 0.50 HP to 2.00 HP |
| 260 | For 3.00 HP to 5.00 HP |
| 261 | For 5.00 HP to 10.00 HP |
| 262 | Supply,installation and Sucessful Commisioning of Motors( Crompton ) with Copper Winding of Approved brand and Manufacture as per the directions of engineer incharge with all accessories and all carriages complete. |
| 263 | Supply,installation and Sucessful Commisioning of Motors( Crompton ) with Copper Winding of Approved brand and Manufacture as per the directions of engineer incharge with all accessories and all carriages complete. |
| 264 | Dismentalling of complete reduction gear unit of de-sludge bridges for repairs by way of providing & manufacuring of complete reduction gear with hub. The job includes costing of brass material, grinding & finishing of virme in order to make the new teeth, replacement of damaged oil seals by way of new one, replacemnet of ball bearings, pouring of required specific gravity ear oil in order to run the reduction gear in smooth order, refixing of same at the site of work incld. all sorts of carriage fro site of work upto workshop and back to site of work including testing & successful commissioning (complete job) |
| 265 | Hire charges of vehicle alongwith comercial driver licensed. |
| 266 | upto 60 Km per day |
| 267 | Overhauling voltage stabilizers installed at site. The job includes pouring / filling of transformer oil of required specified gravity, replacement of driven rotars (automatic), replacement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing, successful commissioning complete job. |
| 268 | 5 KV to 10 KV |
| 269 | 10 KV to 20 KV |
| 270 | 20 KV to 30 KV |
| 271 | Repairs of electrification including replacement of tornout fittings. |
| 272 | Desilting of various strectures by manual means incl. disposal of desilted material from site premised with all carriages lead and lifts etc.The job includes, washing and cleaning of walls, beds, drains and floor etc. with bleaching powdwer solution complete job |
| 273 | Making connection of GI distribution branch with GI main of following sizes, by P/F of tees, incld. cutting and threading the pipe etc. complete |
| 274 | 25 to 40 mm dia nominal bore |
| 275 | Above 40 mm nominal bore |
| 276 | Dismantling old plaster or skirting, ranking out joints and cleaning the surface for plaster incld. disposal of rubbish to the dumping ground within 50 metres lead. |
| 277 | Demolishing stone rubble masonry manually/ by mechanical means incld. stacking of serviceable material and disposal of unserviceable material within 50 mtr. lead: In cement mortar. |
| 278 | Demolishing of cement concrete 1:3:6 or richer mix manually/ by mechanical means including disposal of materials within 50 m lead. |
| 279 | Providing & laying in position cement concrete of specified grade excld. cost of centring & shuttering – All work upto plinth level; 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg. 20 mm nominal size) Crushed |
| 280 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring and shuttering, finishing and reinforcement – All work upto plinth level: 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agg. 20 mm nominal size) |
| 281 | Providing and laying in position cement concrete of specified grade excld. cost of centring and shuttering – All work upto plinth level: 1:3:6 (1 cement : 3 coarse sand: 6 graded stone agg. 40 mm nominal size) (Nallah) |
| 282 | Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 283 | Reinforced cement concrete work in walls (any thickness) incld. attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excld. cost of centring, shuttering, finishing and reinforcement: 1:1.5 :3 (1 cement : 1.5 coarse sand: 3 graded crushed stone agg. 20 mm nominal size) |
| 284 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excld. the cost of centering, shuttering, finishing and reinforcement with 11.5;3(1 cement: 1.5 coarse sand: 3graded stone agg. 20 mm nominal size). |
| 285 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or laces, courses, parapets, coping, bed blocks, anchor blocks, plain window sills, sunken floors fillets etc. upto floor five level, excluding cost of centring, shuttering and finishing. 1:2:4 (1 cement : 2 coarse sand: 4 graded stone agg. 20 mm nominal size) Crushed |
| 286 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50 mm thick 20mm nominal size of agg. (Crushed) |
| 287 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more |
| 288 | Replacement of /Supply of PVC gate valve for bleeching/Alum tanks/ Foot valve (B-class)( PRINCE/NIKE) 20 mm dia. PVC pipe |
| 289 | Replacement of /Supply of PVC gate valve for bleeching/Alum tanks/ Foot valve (B-class)( PRINCE/NIKE) 25 mm dia. PVC pipe |
| 290 | Replacement of /Supply of PVC gate valve for bleeching/Alum tanks/ Foot valve (B-class)( PRINCE/NIKE) 32 mm dia. PVC pipe |
| 291 | Replacement of /Supply of PVC gate valve for bleeching/Alum tanks/ Foot valve (B-class)( PRINCE/NIKE) 40 mm dia. PVC pipe |
| 292 | Replacement of /Supply of PVC gate valve for bleeching/Alum tanks/ Foot valve (B-class)( PRINCE/NIKE) 50mm dia. PVC pipe |
| 293 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 294 | 100 mm dia Gate valve |
| 295 | 80 mm dia Gate valve |
| 296 | 65 mm dia Gate valve |
| 297 | 50 mm dia Gate valve |
| 298 | 40 mm dia Gate valve |
| 299 | 25 mm dia Gate valve |
| 300 | 20 mm dia Gate valve |
| 301 | 300 mm dia Sluice valve |
| 302 | 250 mm dia Sluice valve |
| 303 | 200 mm dia Sluice valve |
| 304 | 150 mm dia Sluice valve |
| 305 | 100 mm dia Sluice valve |
| 306 | 80 mm dia Sluice valve |
| 307 | Providing fixing of C.I NRVS ISI marked of reputed make including cutting of pipes fixing of MS flanges and cost of nuts ,bolts , washers etc including earth work complete. |
| 308 | 100mm dia |
| 309 | 150mm dia |
| 310 | 200mm dia |
| 311 | 250mm dia |
| 312 | Providing and fixing of PVC water tank with all accessories |
| 313 | Centering and shuttering including strutting, propping etc and removal of form work for: |
| 314 | Foundations, footings, basis of columns etc. |
| 315 | Walls (any thickness) incld. attached pilasters, buttresses, plinth and string courses etc. |
| 316 | Columns, pillar, piers, posts and struts. |
| 317 | Suspended floors, roofs, landings, balconies and access platform. |
| 318 | Lintels, beams, plinth beams, cantilevers, etc. |
| 319 | Stairs, (excld. landings) except spiral staircases. |
| 320 | Clearing snow (with frost) from Plants ,its premisis etc. manually using picks and shovels; snow depth upto: |
| 321 | Snow depth upto 150 mm |
| 322 | Snow depth over 150 mm but upto 250mm |
| 323 | Clearing snow avalanche mixed with frost and compressed snow, including all types of equipments and safety to the workers while clearing the avalanches at head site |
| 324 | Supply of fire wood /rejection wood including all carriages uptosite of work,complete |
| 325 | Random Rubble masonry with hard stone from quarry in foundation and plinth inclkuding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with: Cement mortor 1:6 (1 Cement : 6 Coarse Sand) |
| 326 | Dry random rubble masonry with hard stone in foundation and plinth : Using nallah stone without bond stone |
| 327 | Providing / fixing of M.S. step collers from 100 mm to 450 mm dia including earthwork excavation, refilling, dewatering etc. including all sorts of carriages, complete |
| 328 | Cutting road and making good the same including supply of extra quantities of material i.e. aggregate, moorum Screening, red bajri macadam and labour required WBM Quarry |
| 329 | Renewing glass pans with wooden fillets wherever necessary, Glass pans weighing 10 kgs per Sqm (4 mm ) |
| 330 | Repairs / replacement of water closet / flushing cistern including necessary controlled device incld. replacement of accessaries etc. complete job |
| 331 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m in all kinds of soils |
| 332 | Structural steel work in single section without connecting plate incld. cutting, hoisting, fixing in position and applying an priming coat of approved steel primer all complete. |
| 333 | Structural steel work in single section with connecting plate incld. cutting, hoisting, fixing in position and applying an priming coat of approved steel primer all complete.(Riverted and bolted) |
| 334 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 335 | Steel work welded in built up sections / framed work incld. cutting, hoisting, fixing in position and applying a preming coat of approved steel primer using structural steel etc. asrequired :in gratings, frames, gates etc. |
| 336 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purlins, rafters and trussers and including cutting to size and shape sherever required 0.50 mm thick with zinc coating not less than 275gm/m2 |
| 337 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete, 0.63mm thick with zinc coating not less than 275gm/ m2 |
| 338 | Dismantling roofing including ridges, hips valleys and gutters, etc. and stacking the material within 50 metres lead of : G.S Sheet. |
| 339 | Supply of unskilled labours |
| 340 | Supply of skilled labour |
| 341 | Providing and laying in position E.C bags filled with earth/sand including excavating earth/Sand from barrow pits, filling in E.C bags, sewing, stitching, cost of empty cement bags placing in position in all conditions, in or under water. The job includes all types of carriages, leads and lifts and removing of the same all inclusive Complete job. |
| 342 | Providing and fixing/ erecting of C.G.I sheets across the water flow in nallahs using wooden posts/Struts/Bracing of required sizes as per proper requirement to raise the water level to desired level as directed by site Engineer for smooth flow of discharge in sump cum pump house complete job incl. all carriages leads and lifts involved thereof. |
| 343 | Construction of earthen Mathu Bunds of required parameters in all situations and conditions of topographies, including collection of necessary material within the vicinity with all carriages leads and lifts all inclusive as per directions of Engineer in charge |
| 344 | Providing and laying of filter media of required grades and sizes over the filter beds from Ganderbal duly approved by the site Engineer and of proper specifications with all carriages, leads and lifts complete job. |
| 345 | Removing of existing filter media from filter beds and dumping of the same within 50 meters lead for cleaning, sorting of graded material separately for relaying of the same on the filter beds with all leads and lifts complete job. |
| 346 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sectionsshall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.) |
| 347 | Powder coated aluminum (minimum thickness of powdercoated 50 microns) |
| 348 | For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprenegasket required (Fittings shall be paid for separately.)Powder coated aluminum (minimum thickness of powdercoated 50 microns) |
| 349 | Providing and fixing glazing in aluminum door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 350 | Manufacturing,Providing and fixing of MS fittings from 6mm thick MS plate as per site requirement including welding charges ,priming coatof red oxide including all carriages complete. |
| 351 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 352 | Printing of JJM logos with Area 3.00 Sqm complete job |
| 353 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 354 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping groundwithin 50 meters lead. |
| 355 | Cutting of pipe, providing and fixing MS flanges to end for fixing of sluice valves CI isi marked of reputed make of following dia pipes. |
| 356 | 80mm dia |
| 357 | 100 mm dia |
| 358 | 150mm dia |
| 359 | 200mm dia |
| 360 | 250mm dia |
| 361 | 300 mm dia |
| 362 | Providing and fitting at site 3-phase, Voltage stabilizer of following ratings, oil emersed, of standard make and quality including accessories as required. The job includes making of connections with main panel board and service line. To be paid in fitted and finished form after testing on full load capacity, complete job. |
| 363 | 10 KVA |
| 364 | 25 KVA |
| 365 | 32 KVA |
| 366 | Providing and Laying Mating/ Furnishing whih shall include laying of thermocol and excel as per the directions of engineer incharge including all charges and carrages complete. |
| 367 | Supplying and Providing 6000 Mah Torch/ emergency light of approved brand and make as per the directions of engineer incharge with all cvarriages complete. |
| 368 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 369 | Providing and fixing Flex Hoardings/ Banners complete job |
| 370 | Providing and Fixing of 1 HP Motor with pannel of approved brand and make and all other accessories including cost of all carraiges and Fixing charges complete job. |
| 371 | Providing and Fixing of 1.5 HP Motor with pannel of approved brand and make and all other accessories including cost of all carraiges and Fixing charges complete job. |
| 372 | Providing and Fixing of 2 HP Motor with pannel of approved brand and make and all other accessories including cost of all carraiges and Fixing charges complete job. |
| 373 | 150mm dia |
| 374 | 200mm dia |
| 375 | 250mm dia |
| 376 | 300 mm dia |
| 377 | Providing and applying integral crystalline slurry of hydrophilic innature for waterproofing treatment to the RCC structures like retainingwalls of the basement, water tanks, roof slabs, podiums, reservoir,sewage & water treatment plant, tunnels / subway and bridge deck etc.,prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry: 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystallineslurry : 1 part water) for horizontal surfaces and applying the same fromnegative (internal) side with the help of synthetic fiber brush. Thematerial shall meet the requirements as specified in ACI- 212-3R-2010i.e by reducing permeability of concrete by more than 90% comparedwith control concrete as per DIN 1048 and resistant to 16 bar hydrostaticpressure on negative side. The crystalline slurry shall be capable of selfhealing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge.The product performance shall carry guarantee for 10 yearsagainst any leakage. |
| 378 | Providing and Supply Shoes/ Gum Boots for winters as per the specification of engineer incharge including all charges complete job |
| 379 | Providing and supplying rain coat for winters as per the specification of engineer incharge including all charges complete job |
| 380 | Providing and supplying showels including all carriages complete |
| 381 | Providing and supplying Dry fruit Boxes 200 Grms as per instructions of engineer incharge complete |
| 382 | Providing and fixing of Wall Paper of approved brand for walls of rooms including supplying and all carriages complete. |
| 383 | Providing and Supplying of Brush cutter of approved brand and make including all carriages complete job |
| 384 | Providing and Supplying of welding machine of approved brand and make including all carriages complete job |
| 385 | Providing and supplying led bulbs including all carriages and all other charges complete job 12 Watt ( 3 inchs) |
| 386 | P/F of 25 mm sqmm (8×5.6 mm) Cu wire 2 core flexible wire (FRLSH or FRHHR) including all charges upto the site. |
| 387 | P/F of 160 Amp MCB 25k/16k DP with enclosure box powder coated (MCB with enclosure), including all charges complete job. |
| 388 | P/F of 300 Amp MCB, D.P with enclosure box powder coated.Complete job |
| 389 | P/F of 300 Amp on load change over front handle with enclosure box powder coated, complete job |
| 390 | P/F of 400 Amp Bus Bar made of Cu wire with enclosure box powder coated complete job |
| 391 | P/F of PVC conduit pipe of 32 mm N.B of approved brand (Finolex/Anchor) including all charges. |
| 392 | P/F of 32 mm N.B Iron clamps made of approved (Finolex/Anchor) complete job |
| 393 | P/F of 32 mm N.B bends made of approved brand (Finolex/Anchor) complete job |
| 394 | P/F of 70 sqmm wire (Ø 9.44 mm) of approved brand with 3.5 core Al complete job |
| 395 | P/F of GI screws upto 32 mm size complete job |
| 396 | P/F of plugs upto 32 mm size complete job |
| 397 | Supply of skilled labour (Electrician) complete job |
| 398 | P/F of LED luminaires of 18 watts of approved (Havells/Anchor/Siska) including all charges of wiring & other charges complete job. |
| 399 | Supplying of Chairs for Different Sections at Divisional /Sub divisional office including cost of all carriages.The brand and make of items shall be decided by engineer incharge. |
| 400 | Carriage of material from divisional store or from source to road/ dumping site of work by Mechnical Transport including loading unloading and stacking etc. |
| 401 | Cement/ Steel average lead of: |
| 402 | 0-20 Kms |
| 403 | 20-40 Kms |
| 404 | 40-60 Kms |
| 405 | Sand/ Aggregate/ Stone Soling average lead of: |
| 406 | 0-20 Kms |
| 407 | 20-40 Kms |
| 408 | 40-60 Kms |
| 409 | carriage of material from dumping/ road site to actual site of work by Meanual Means including loading unloading and stacking etc. |
| 410 | Cement/ Steel/ Pipes |
| 411 | 0-200 Mtrs |
| 412 | 200-400 Mtrs |
| 413 | 400-1000 Mtrs |
| 414 | Sand/ Aggregate/ Stone Soling average lead of: |
| 415 | 0-200 Mtrs |
| 416 | 200-400 Mtrs |
| 417 | 400-600 Mtrs Please Enable Macros to View BoQ information |
