|
| 1 | Hiring charges of Hydra for loaring and unloaring of 250 mm NRV from sump well complete in all respect. |
| 2 | Providing and fixing of Seal Grease Glain for 250mm Sluice valve including the cost of material, labour and cartage etc. complete in all respect. |
| 3 | Providing and fixing of Steel rod for 250mm Sluice valve including the cost of material, labour and cartage etc. complete in all respect. |
| 4 | Providing and fixing of 10` Rubber sheet for 250 mm Sluice valve including the cost of labour complete in all respect. |
| 5 | Providing and fixing of 8` Rubber sheet for 200 mm NRV iincluding the cost of labour complete in all respect |
| 6 | Providing and fixing of gun metal check net for 250mm sluice valve including the cost of material, labour and cartage etc. complete in all respect |
| 7 | Repair of 200 mm i/d NRV with rubber sheet, MS sheet, MS Sleave including labour for opening and fitting, cartage, loading and unloading etc. complete in all respect. |
| 8 | Rewinding of 15 HP submersible motor and pump including labour, cartage, loading and unloading and rubber bush, gun metal bush, sleaves, impeller, bole, rooter grinding, nackering, sen guard, loarding and unloaring etc. complete in all respect. |
| 9 | [13.2]Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 10 | [24.5.1.4]MISCELLANEOUS ITEMS 1.4. Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core 6 sqmm |
| 11 | [30.16.1]Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 1. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 12 | [30.37.1]Finishing walls with Acrylic Smooth exterior paint of required shade : 1. Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface |
| 13 | [6.1.2]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 14 | [7.21.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand) Please Enable Macros to View BoQ information |
