Tender For Stage Contract For Pwd (Rnb) Division Vailoo, Anantnag-Jammu And Kashmir

TDR : 55233663

Tender Notice
BOQ

5 Days Left

Anantnag , Jammu And Kashmir

Tender Brief : Tender For Stage Contract For Pwd (Rnb) Division Vailoo

Document Fees
₹ 800 /-

EMD
₹ 20000.0 /-

Tender Value
Refer document

Submission Date
02-05-2026

Competition Type
Indian

Bidding Type
Works

Need a Business Loan? Apply Now !


1	Engagement of JCB for clerance of site , removal of material from road surface including erath work and disposal of surplus excavated earth as directed by engineer incharge at site complete job.
2	Engagement of Tractor for removal of material/garbage from road surface to the dumping site as directed by engineer incharge at site complete job.
3	Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil
4	Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, ( All kinds of Soil)
5	Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
6	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc .upto required depth ) and for shafts, wells, cesspits including dressing of sides and ramming of bottoms , including getting out excavated earth and disposal of surplus excavated earth as directed, ( All kinds of Soil)
7	Supply and filling of RBM /Nallah Much of required size including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacity including carriage of the same from approved source upto site of work complete
8	Supply and filling of Khak bajri including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacity including carriage of the same from approved source upto site of work complete ( for Development of berms .
9	Providing / laying of RCC Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage of all materials and pipes upto site of work complete. 10 INCH DIA
10	12 INCH DIA
11	14 INCH DIA
12	16 INCHA DIA
13	18 INCH DIA
14	24 INCH DIA
15	28 INCH DIA
16	32 INCH DIA
17	36 INCH DIA
18	39 INCH DIA
19	40 INCH DIA
20	48 INCH DIA
21	Providing / laying of MS Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage of all materials and pipes upto site of work complete. 6 INCH DIA
22	8 INCH DIA
23	10 INCH DIA
24	12 INCH DIA
25	Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means).
26	Scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity.
27	Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 63 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriage of Quarry Crushed stone aggrregate and stone screeing, stone dust from approved soucrce upto site of work complete (Finished work to be measured) 75mm compacted thickness
28	Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 53 to 22.4mm size, stone screening 11.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriage of Quarry Crushed stone aggrregate and stone screeing, stone dust from approved soucrce upto site of work complete (Finished work to be measured) 75mm compacted thickness
29	Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge i/c all carriages complete job
30	Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M/WMM @ 0.75 Kg/sqm i/c all carriages complete job
31	Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On bitumen surface @ 0.50 Kg/sqm i/c all carriages complete job
32	Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity i/c all carriages
33	Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification,complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG- 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity all carriages complete job.
34	Providing and laying of 6mm thick seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all carriages complete job.
35	Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete.
36	P/L in position cement concrete in 1 : 4 : 8(1 cement : 4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.
37	P/L in position cement concrete in 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. upto plinth level
38	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
39	P/L in position cement concrete in 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. upto plinth level
40	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
41	P/L in position reinforced cement concrete in 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete. ( all works upto plinth level)
42	P/L in position reinforced cement concrete in 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete. ( all works above plinth level upto level V)
43	Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. FE-500 D or more
44	Providing / Fixing of necessary farm work / shuttering including strutting, propping etc and removal of same complete:- (a) Foundations, footings, bases for columns
45	Return walls, walls (any thickness) including attached pilaster buttresses, plinth and string course fillets, kerbs and steps etc.
46	Suspended floors, roofings, landings, balcones and access plateform
47	50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete
48	40mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete
49	25mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete
50	12mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete.
51	12mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete.
52	Engagement of labour /Masdoor for one day
53	Engagement of skilled labour with all machinary like cutters , axe etc for purning of the trees
54	Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
55	Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive
56	Clearance of slips disposal lead upto 50 m and lift upto 1.5 m.:- in ordinary soils disposal lead upto 50 m and lift upto 1.5 m.
57	in soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m.
58	In soils; mixed with Decomposed Rocks; by blasting or any other means
59	Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
60	White washing with lime to give an even shade : old work (two or more coats)
61	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work
62	Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. Old work ( One or more coats)
63	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
64	Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with 16.0 (Road Work) 224 base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. 16.66.1 Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm.
65	Clearning grass and removal of rubish upto a distance of 50 m out side site
66	Felling of trees of the girth measured at height of 1 m above ground level) including cutting of trunks and branchs removing of roots and stacking of serviceable material material and disposal of unserviceable material up to lead , lift as required complete . (a) Beyond 30 cm girth up to and including 60 cm girth
67	b) Beyond 60 cm girth up to and including 120 cm girth
68	c) Beyond 120 cm girth up to and including 240 cm girth
69	Refixing of damaged sigh boards caution board , boundray walls etc. complete job.
70	Random Rubble masonry with hard stone from qyarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with cement mortar 1:6 (1 Cement: 6 coarse sand) Quarrycomplete job.
71	Dry Random Rubble stone Masonry using Quarry stone with bond stone in foundation and Plinth
72	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :1:4 Cement mortar 1:4 ( 1 cement : 4 coarse sand)
73	Extra for brick work with common burnt clay bricks/ cement concrete bricks in superstructure above plinth level upto floor V level
74	Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
75	Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat all complete , welded
76	Supply of diesel for generator
77	Supply and serving of tea/kehwa with bread
78	Supply of Drinking Water Bottle
79	Hire Charges incl Installation shamiyana/ water proof tents incl side coverings for 01 days
80	Hire Charges for plastic Chairs for 05 days
81	Providing and serving dry fruits ( almond, cashew nut, pista) in disposible glass bowls
82	Providing and fixing of Flexi banners of 5' x 3' size
83	Clearing Snow (without frost) from Roads, manually(all depths)/ from ground where tents are to fixed and its surroundings (if required)
84	Providing and fixing of temporary stage by way of plyboards and structural steel supports including furnishing complete job for 5 days
85	Supply and hoisting of colour balloons tricolour along with thread
86	Illumination of Govt. building (tri colour ) for 5 days
87	Providing of complete PA system for 5 days
88	Supply of chairs, arranging in rows behind barricading and VIP area on hire chargers including all cartriages to and fro complete (to be supplied and placed in position 05 days before the function): Sofa (5seater) with tables
89	Supply of chairs, arranging in rows behind barricading and VIP area on hire chargers including all cartriages to and fro complete (to be supplied and placed in position 05 days before the function): VIP chairs
90	Point wiring for switch controlled primary lighting points/ fan points with 3x1.5 sq mm (P+N+E)FRLS PVC insulated flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex make in recessed or surface conduiting system, incl. the cost of supplying and fixing of metallic modular grid plate mounted flush, 240 volt 6A control switch housed in zinc chromate passivity GI box with modular cover plate complete as per specifications and as required. The job includes providing and laying of circuit wiring with 3x1.5 sq mm PVC insulated multistranded copper wire laid through PVC conduit from DB to first switch in sub circuit. Separate wiring for normal and inverter supply is to be provided and no extra circuit wiring shall be paid what so ever reason or length.
91	Point wiring for 10A socket out lets with 3x2.5 sq mm (P+N+E)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex make in recessed or surface conduiting system, incl. the cost of supplying and fixing of metallic modular grid plate mounted flush, 3 no. 240 volt 6A 5 pin socket out lets along with 3 no. 6A control switch housed in zinc chromate passivity GI box with modular cover plate complete with internal connections, loop earthing wire of same size as per specifications and as required. The job includes providing and laying of circuit wiring with 3x2.5 sq mm PVC insulated multistranded copper wire laid through PVC conduit from DB to first switch in sub circuit. Separate wiring for normal and inverter supply is to be provided and no extra circuit wiring shall be paid what so ever reason or length. (Maximum two points shall be connected on one circuit).
92	Point wiring for 16A socket out lets with 3x4 sq mm (P+N+E)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex make in recessed or surface conduiting system, incl. the cost of supplying and fixing of metallic modular grid plate mounted flush, 240 volt 16A 6 pin combined shuttered socket out lets along with 240volt 16A control switch housed in zinc chromate passivity GI box with modular cover plate complete with internal connections, loop earthing wire of same size as per specifications and as required. The job includes providing and laying of circuit wiring with 3x4 sq mm PVC insulated multistranded copper wire laid through PVC conduit from DB to first switch in sub circuit. Separate wiring for normal and inverter supply is to be provided and no extra circuit wiring shall be paid what so ever reason or length. (Maximum two points shall be connected on one circuit). .(Havells/ Polycab/ Anchor/ Finolex) .
93	Supply, installation, testing and commissioning of 12 Watt LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. Havells/ Philips/ Crompton/ Wipro.
94	Supply, installation, testing and commissioning of1200 mm sweep ceiling fans, incl. cost of ceiling rose (if required) and making of necessary connections. Havells/ Crompton/ Anchor/ Bajaj.
95	Supply, installation, testing and commissioning of 200 mm sweep shutter type exhaust fans (Sample to be got approved), incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. Havells/ Crompton/ Anchor/ Bajaj.
96	Supply and fixing of modular blanking plates on modular switch plates, excluding cost of switch plates.
97	Wiring for circuits/ sub mains along with earth wire in FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface PVC conduit, including cost of conduit. .(Havells/ Polycab/ Anchor/ Finolex) . 2 x 2.5 sq.mm + 1x 2.5 sq. mm for inverter / solar sub main
98	Wiring for circuits/ sub mains along with earth wire in FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface PVC conduit, including cost of conduit. .(Havells/ Polycab/ Anchor/ Finolex) .2 x 4 sq.mm + 1x 4 sq. mm for normal Lighting sub main
99	Wiring for circuits/ sub mains along with earth wire in FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface PVC conduit, including cost of conduit. .(Havells/ Polycab/ Anchor/ Finolex) .2 x 10 sq.mm + 1 x 6 sq. mm for normal / heating sub main
100	Supply and fixing of 25 mm dia. Medium grade PVC conduit including its allied accessories like bends and concealed deeps, etc. for laying of wires, recessed in RCC slab / walls including refacing of walls or fixed with necessary clips and rowel plugs .
101	Supply and fixing of fan deep made of heavy gauge sheet in RCC slabs
102	Supply and fixing of 12 way , Double door surface/ recess mounting , vertical type, 240 V, SP&N MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer.
103	Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB suitable for inductive load in the MCB distribution board complete with necessary connections. Havells/ Indo Asian/ Legrand/Schneider.
104	Supply, installation, testing and commissioning of 32A DP rating 240V, 10 KA “C” curve MCB suitable for inductive load in the MCB distribution board complete with necessary connections. Havells/ Indo Asian/ Legrand/Schneider.
105	Supply, installation, testing and commissioning of 63A DP rating 240V, 10 KA “C” curve MCB suitable for inductive load in the MCB distribution board complete with necessary connections. Havells/ Indo Asian/ Legrand/Schneider.
106	Supply and fixing of single pole blanking plates on existing MCB distribution boards.
107	Supply, installation, testing and commissioning of wall/floor mounted compartmentalized main distribution panels, fabricated out of 16 gauge sheet steel, dust protected, painted, incl. earth terminal with all necessary accessories with internal wiring as required. The panel is to be provided with the following adjustable type controlling/ protection switch gear devices: 1.NORMAL INCOMING 125A DP MCB 10KA 01 no. 200A SP&N bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. 2. Generator INCOMER 100A change over switch 01 no. 200A SP&N bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. 3.INVERTER/ SOLAR INCOMER 40A DP MCB 10KA 01 no. 100A P&N bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. OUTGOING 100A DP MCB 10KA 02 no. 63A DP MCB 10KA 02 no 32A DP MCB 10KA 02 no The contractor has to submit the test certificate of main switch gear.
108	Earthing with GI earth pipe 4.5 mtr. Long 40 mm dia. Including accessories and providing masonry enclosure with cover plate having locking arrangements and watering pipe, trenching and filling with charcoal/coke and salt.
109	Providing and fixing of 25mmx5mm GI strip on surface or in recess for extending the earthing from earth electrode to controlling panel in one run to be laid through required dia. of PVC conduit.
110	Supply, laying, connecting and commissioning of 35 sq. mm 2 core XLPE/ PVC insulated and steel armored 1.1 KV grade Aluminum LT cable for service line, incl. cost of required al. thimbles duly crimped. (Over head/ under ground).
111	Supply, laying, connecting and commissioning of fan regulator (two module) stepped type Havels/Anchor/SSK/Legrand
112	P/F PVC conduits 25mm dia (Finolex or equivalent brand) i/c all fastenings/fittings including all carriages complete job
113	Repairing Hot Water electrical heaters with all necessary items required complete job
114	Repairing Generator including fixing, with MCB, Wiring and all other necessary items required complete job
115	Providing and fixing of water purifier suitable for all borewell, tanker, munciplity water , Technology RO+UV+TDS+UF . With 1 year warranty , 4 Year service, Capacity 8L
116	Providing Single door 4 star refrigrator with base drawer, digital inverter . With 1 year warranty on the product , 20 year on compressor , Capacity 183 L
117	Supply of 2+1+1 seater sofa. Specifications:Dimensions of 2 seater 165 cm (L) x 80 cm (W) x 86 cm (H), Dimensions of 1 seater 83 cm (L) x 80 cm (W) x 86 cm (H) Seating Capacity: 2+1+1 people, Frame material : tropical solid wood , Seatfoam : polyurethane foam with recron layer. Foamdensity . Back foam : polyurethane foam with silicon fill Atarms. Foam density : 22 kg/cubic cmMaterial: Wood Upholstery Material: Fabric, Color: Grey, Style: Contemporary, Cushions: Removable and reversible Assembly
118	Providing Double bed with dimensions 198 cm L x 150 cm W x 50 cm H, Modern design headboard and foorboard. ,Mattress type: High density foam, thickness 6 inch Finish : Anti-scratch and waterproof surface coating. Warranty Minimum 1 year for manufacturing defects
119	Providing Office table with dimensions 5 ft x 2.5 ft , Modern design : Anti-scratch and waterproof surface coating. With drawers, Warranty Minimum 1 year for manufacturing defects
120	Providing and fixing Ist quality ceramic Antiskid Floor Tiles conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Sizeof Tile 300 x 300 mm. (including cost of all material, leads, lifts and carriages etc upto site of work complete).
121	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
122	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
123	Providing and fixing white glazed vitreous china wash basin (pedestal basin) with 32mm C.P. brass waste of standard pattern, 32mm dia C.P. brass bottle trap and union, 32mm dia C.P. pipe to wall and C.P. wall flange, CP brass Basin Mixer , CP brass angle valve with braided connection pipe complete with fixing Brackets painted white, required C.P. brass screws, nuts, bolts, consumable complete, cutting and making good the walls wherever required.
124	Providing and fixing of PVC pipes Type -B as required at site including all carriage and fitting and all accessories required as per the direction of site incharge and material must be of standard make as approved by site incharge 100mm dia:
125	Providing and fixing of PVC pipes Type -B as required at site including all carriage and fitting and all accessories required as per the direction of site incharge and material must be of standard make as approved by site incharge 75mm
126	P/F LONG NOSE C.P BRASS BIB COCK OF STANDARD MAKE
127	P/F C.P BRASS ANGLE Value COCK OF STANDARD MAKE
128	Providing and fixing G.I. Pipes complete with G.I. fittings and clamps (PRAKASH SURYA/JINDAL MAKE TYPE-B ) i/c making good the walls etc. concealed pipe including painting with anticorrosive bitumastic paint, cutting chases and making good the wall :15 mm dia. nominal bore including all carriages complete job
129	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked(SINTEX HEAVY DUTY) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including all carriages complete job
130	Constructing masonry main holes 45x45x30 cm inside, in brick work in cement mortar 1:4 : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. complete job i/c outer lid of heavy duty PVC i/c its frame including all carriages complete job
131	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40. 3.5 mm thick glass pane (weighing not less than 10 kg/sqm
132	Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.: 0.50 mm thick with zinc coating not less than 275 gram/m including all carriages complete job
133	Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.: 0.63 mm thick with zinc coating not less than 275 gram/m including all carriages complete job
134	Labour charges for applying sealant Putty for waterproofing over cracks/holes in CGI roofing i/c cost of sealant Putty and other incendentals complete job
135	Providing and fixing glass panes with glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes including all carriages complete job
136	P/F PLYWOOD CEILING USING 12MM THICK PLY WITH FRAMEWORK OF 2.5\\"X2.5\\" POPLAR WOOD JOISTS I/C ALL FITTINGS FASTENINGS AND CORNICES COMPLETE JOB
137	P/F aluminium dooors/windows with al necessary fittings and fastenings i/c butt hinges , tower bolts , handles , wiremesh, glass panes , gaskets etc complete job including all carriages complete job
138	P/F PVC Waste Pipe of specified dia for washbasins , urinals etcwith all necessary fittings and fastenings complete including all carriages complete job
139	P/F aluminium fittings for doors windows etc:tower bolts 100mm
140	P/F aluminium fittings for doors windows etc:tower bolts 150mm
141	P/F aluminium fittings for doors windows etc:handles 100mm
142	P/F aluminium fittings for doors windows etc: handles 150mm
143	P/F aluminium fittings for doors windows etc: sliding door bolts 200mm
144	P/F aluminium fittings for doors windows etc: Wind Hooks
145	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length : imported wood including all carriages complete job
146	Distempring with oil bound washable distemper of approved brand & manufacture to give an even shade New work (2 or more coats)over and incld. Priming coat with cement primer and prep of surface
147	Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. including all carriages complete job
148	P/F PPR pipes 25mm dia (Prince or equivalent brand) i/c all fastenings/fittings including all carriages complete job
149	Engagement of Carpenter /Blacksmith including materials required for the same
150	Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. imported wood 30mm
151	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : imported wood 30mm thick
152	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. imported wood
153	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
154	P/F aluminium sliding door bolts ISI marked anodised (anoidic coating not less than AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws complete job 300x16 mm
155	Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
156	Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
157	Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete :
158	Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete
159	Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).
160	Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work of approved brand and manufacture. On wood work
161	Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately.Paanch Murabah , including fixing of 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. completecomplete and French spirit polishing, Two or more coats on new works including a coat of wood filler
162	Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick, including Applying one coat of water thinnable cement primer of approved brand and manufacture
163	Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats
164	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+/- 5 %) total coated thickness(TCT), Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated Jor L hooks, bolts and nuts and GI:Seam bolts, and nuts,GI plain and bitumen washers complete: Ridges and Valleys (Upto 60 Cm) wide.
165	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete
166	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
167	Providing and fixing white vitreous china pedestal type water closet (European type) withseat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. (Jaquar or Equivalent as Per Make List)
168	Providing and fixing wash basin with C.I. brackets,15mm C.P brass piller taps, 32 mm C.P. brass waste coupling of standard pattern,including suitable Pedestal, PVC connections to basin mixer, painting of fittings and brackets, cutting and making good the walls wherever required.white viterous china basin size 550x400 mm witn a 15mm CP Brass single hole basin mixer (Jaquar or Equivalent as Per Make List)
169	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040mm bowl depth 250mm
170	Providing and fixing mirror of superior glass (of approved quality) and of required shape andsize with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, Rectangular shape 600x450 mm
171	Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms
172	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S.triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
173	Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm,height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
174	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats withCP brass screws with concealed fitting arrangement of approved quality and colour, 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.
175	Providing and fixing toilet paper holder of C.P. brass of approved make including all fittingsand fixtures, complete job
176	Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for supports.Make: Pipe & fittings: VECTUS/Kisan/AKG
177	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.: PN-16 pipe , 25 mm OD(SDR-7.4)
178	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.: PN-16 pipe , 32 mm OD(SDR-7.4)
179	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats completeof required dia
180	Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.(Jaquar or Equivalent as Per Make List)
181	Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 (Jaquar or Equivalent as Per Make List)
182	Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.(Jaquar or Equivalent as Per Make List)
183	Providing in position storage type Hot Water electrical Geysor/heator with copper container, insulation, and stove enameled M.S. jacket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non return valve and 15/20mm dia outlet including making connections complete in all respects. (wall mounted with suitable M.S. bolts and nuts) Capacity - of approved quality and design or equivalent: 50 Litre
184	Providing in position storage type Hot Water electrical Geysor/heator with copper container, insulation, and stove enameled M.S. jacket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non return valve and 15/20mm dia outlet including making connections complete in all respects. (wall mounted with suitable M.S. bolts and nuts) Capacity - of approved quality and design or equivalent: 25 Litre
185	Ruled/ Flush pointing on masonry surface with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust ( the rate is inclusive of all materials and labours involved).
186	Providing and laying of Stones laid in wire crates with 4 mm dia black annealed wire confirming IS 280 and IS 4826 in 100mm X 100mm mesh woven diagionally including 10 % extra for lapses and Joints laid with Quarry stones weighing not less than 25 kg each as per drawing Incld. cost of wire crates loading , unloading and Haulage Complete Job but Finished work to me measured
187	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm
188	Providing and erecting W metal beam crash barrier comprising 3mm thick corrugated sheet metal beam rail, 70 cm above road/ground level fixed on ISMC series channel vertical posts,150X75X5 mm spaced 1.80 M high, 110 cm below ground level all steel parts and fitments to be galvanised by hot dip process , all fittings to confirm to IS 1367 and IS 1364 metal beam rail to be fixed on vertical posts with spacer channel section 150X75X50 mm, 330 mm long complete as per clause 810.incld earth work in excavation by manual means (All kinds of soil), laying of Stone soling hand packed and providing and laying in position cement concrete in 1:2:4 (1 cement: 2coarse sand: 4 graded stone aggregate 20 mm nominal size) crushed upto plinth level in a pit of Size 600 mm X 600 mm X 600 mm. incld all taxes & GST and all carriages and shuttering.
189	Providing hoisting and fixing trusses/purlins/rafters/posts/post like components including cost of screws te. Complete in ist class imported commercial wood
190	Providing hoisting and fixing trusses/purlins/rafters/posts/post like components including cost of screws te. Complete in popular wood
191	Taking out existing wooden door /Window shutters, repair by cutting, painting etc. and refixing of repaired door/window shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
192	Supply and fixing of wall paper of approved design and clour including all costs - complete job
193	Labour charges for Fixing of structural steel in welded section including all fixation chargres and all carriages complete job
194	Providing Retro-reflective regulatory sign board of size 900mm diameter made out of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity grade A. the aluminum sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge
195	Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete:18.19.1 10 liter capacity -White
196	P/F of LED Scrolling Display Board at Market Places or wherever necessary including all costs and carriages - complete job
197	Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment
198	Providing and fixing glass panes with glazing clips in almunium steel doors, windows, clerestory windows, all complete with : 5.0mm thick glass panes including all carriages complete job
199	P/F of inauguration/Foundation Stone made up of Granite with engraved letters including curtain roads and all other necessary items as per the direcection of site incharge -all complete job
200	Providing and fixing 20mm dia C.P. brass quarter turn angle valves with C.P. brass connecting pipe, union nut and C.P. brass wall flanges.
201	Providing and Fixing of soap case /glass shelves
202	Providing and fixing of Towel rack
203	Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design complete including cost of cutting and making good the cut-outs in walls and floors etc. complete (P or S trap). 100 mm inlet and 100 mm out let
204	Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works.: 75x75 x1 mm
205	Providing and fixing 100mm dia nominal bore uPVC pipe (Class-III) inlet fitting approximately 400mm long above the trap with one or more 32/ 40/ 50/ 65mm dia holes for jointing waste pipes from waste appliances jointed and sealed with epoxy based sealant complete.
206	Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W. B.Sink, floor drains etc.: 40 mm outer dia
207	Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W. B.Sink, floor drains etc.: 63 mm outer dia
208	Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for supports.: 110 mm outer dia
209	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.: PN-16 Pipe, 20mm OD(SDR-7.4)
210	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.:PN-16 Pipe, 25mm OD(SDR-7.4)
211	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.: PN-16 Pipe, 32mm OD(SDR-7.4)
212	Providing and fixing of 3.5 mm thick glass panes for windows & ventilators including beeding complete job
213	Providing and Fixing of imported wooden 12 mm thick T&G panelling fixed including Budloo wooden and 12 mm ply frame work, with all fixtures complete incl. french polishing two or more coats
214	Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine Rate per sqm cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of 16mm 18mm required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade
215	Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work
216	Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2
217	Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
218	Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
219	Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
220	Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing
221	Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture
222	Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.
223	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (whereverrequired) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,
224	Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
225	Providing and fixing CP Brass Single lever wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia
226	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
227	Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked including top cover of 6mm commercial ply wood conforming to IS :303 BWR grade, nickel plated M.S. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100mm x 40mmx40 mm on both inner side of pelmet and rawl plugs 75mm long etc. all complete.
228	Engagement of Helper class for refixing CGI sheets, ceiling etc. with all necessary items required complete job.
229	Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution
230	Applying a coat of mordant solution on G.S. sheets: With a solution of 38gms of copper acetate in liter of soft water
231	Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2
232	Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2
233	Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2
234	Providing and fixing plained eaves boarding of (300 x 40mm ) N/S with necessary grooves and chamfer as per detailed drawing.(ornamental) (imported Wood) incl cost of nails including polishing.
235	P/F of 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) for roof soffits & Ceiling on wood work in false ceiling, partitions sawn and putup in position in budloo wood (Ceiling Joists). including cost of necessary adhesive & cost of nails etc. with necessary cornice of required size complete job. incl cost of nails / screws all complete as approved by Engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete).including polishing Soffits
236	P/F of wooden flooring of A class Laminated wood flooring 8mm thick fixed on foam with proper resin material, beeding and door profiles complete job
237	French spirit polishing, one or more coats on old work
238	Varnishing with flatting varnish of approved brand and manufacture oneor more coats on old work
239	Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
240	Providing and fixing of Wardrobes of 2 ft depth of required shelves & partions, using 12mm,19mm water proof plywood and covering the face using 1.5 mm Sunmica of required shape and design incl cost of all fittings (hinges,Magnets, locks, handles Etc) complete Job
241	Engagement of carpenter 1st class for removing and refixing of ceiling, ceiling etc. with all necessary items required complete job.
242	Engagement of Plumber 1st class for repairing leakage of water fittings etc. with all necessary items required complete job.
243	Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge.All kinds of soil
244	Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment
245	Providing and fixing glass panes with glazing clips in almunium steel doors, windows, clerestory windows, all complete with : 5.0mm thick glass panes including all carriages complete job
246	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. MS Tube
247	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. ERW Tubes
248	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. GI Pipes
249	Providing and fixing Glow studs of size 100x20mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact Polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The Glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35 +/- 5 degrees to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS : 873 part 4 : 1973. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction ofEngineer-in-charge.
250	Providing and fixing post delineators made of ABS round body fitted with 2nos. 100mm dia high reflective and reflectors and mounted on M.S. pipe of 65mm dia duly powder coated with anti-rust and anti-theft steel to be installed as per direction of Engineer-in-charge.
251	Providing and fixing of retro reflective tape (commercial grade) of 50 mm width, in red/yellow/white colour, on vehicles or required surfaces, including surface preparation, cutting, and proper adhesion, complete as per requirements. 1 roll having a length of 50m
252	Providing and supplying of ergonomic revolving office chair with high back support, breathable mesh/foam cushioned seat, adjustable lumbar support, and padded armrests. The chair shall be equipped with 360° revolving mechanism, height adjustable lift, tilt/lock mechanism, and sturdy nylon/metal base with smooth castor wheels.
253	Supply, testing and commissioning of 1.2 KVA (1200VA) Power Inverter (Pure Sine Wave type) having generator compatible & provided and fitted with 1 no. 12V, 200 Ah, tall tubular batteries of Exide make. The specifications are envisaged thereof:1.Capacity of power inverter: 1.2 KVA2.Output wave form: Pure Sine Wave3.Operating input voltage: +_ 10V4.Input frequency: 40Hz to 60Hz5.Protection: Short circuit trip, Over load trip, battery low and over charging protection, over temperature protection, AC fuse trip/ MCB trip protection, Phase reverse protection.6.Display: Tri color LCD display which shows main input voltage, battery voltage, applied load in percentage, battery charging/ charged, battery low / over charge, short circuit, over temperature.7.Total harmonic distortion @ linear load: <3%8.Output frequency: 50Hz +_ 1Hz9, Battery voltage & Ah: 12V / 200Ah tall tubular type10.No. of batteries per inverter : 1 no.The job also includes terminal connections of batteries, input/output leads of required size and length, carriage and applicable taxes. The job further includes AMC of Inverter and batteries for a period of three years reckoned from the date of successful commissioning. The defective items should be replaced by fresh ones during AMC period ( v Guard, Luminious, Microtech )
254	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles,including applying a priming coat of approved steel primer,
255	Providing and fixing UV stabilized fiberglass reinforced plastic sheetroofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\"or 6\\") as specified.
256	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steelbolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
257	P/F of 1.5 Ton Split AC ( Hot and Cold) use of approved brand with capacity 3.5 KVA Stablizer including all Fittings and fixtures Complete Job.
258	Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete.
259	Providing and fixing PVC wall/ceiling panelling of approved make and shade, consisting of PVC panels (minimum 5 mm to 8 mm thick or as specified) fixed on wooden battens/ GI framework at required spacing, including cost of framework, screws, nails, adhesives, starter strips, corner trims, edge beading, and all necessary accessories complete.The work includes proper alignment, cutting, fixing, finishing, and cleaning, complete as per direction of Engineer-in-Charge.
260	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately) poplar wood
261	Engagement of skilled technician for inspection, servicing, maintenance and repair of office equipment including printers (laser/inkjet) and CCTV systems (cameras, DVR/NVR, cabling, power supply, connectors, etc.), including fault diagnosis, cleaning, adjustment, software configuration and restoration to working condition complete. The item includes routine maintenance, troubleshooting of hardware/software issues, checking of wiring connections, replacement/refixing of minor components (excluding cost of major spare parts), and submission of service report, complete as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jammu And Kashmir Tenders

Machinery And Tools Tenders

Building Machinery Tenders

Prime Mover Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Stage Contract For Pwd (Rnb) Division Vailoo, Anantnag-Jammu And Kashmir

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Stage Contract For Pwd (Rnb) Division Vailoo, Anantnag-Jammu And Kashmir

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us