|
| 1 | Demolition of cement concrete of any description and in any position (un-reinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.Note:Demolition material throughout MOD Land rate include above item . |
| 2 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | Dismantiling of stone slabs and tiles (Kota stone etc) of any discription or any thickness in floors, aprons, skirting, dado etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 4 | M&L for PCC 1:4:8 Type D2 (using 40mm graded stone aggregate) as in foundation filling mass concrete, complete all as specified and directed. |
| 5 | M&L for 25 mm thick PCC 1:2:4 Type B0 (using 12.5mm graded stone aggregate) in floors complete all as specified and directed. |
| 6 | M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aprooved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 7 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aprooved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic arking etc of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 8 | M&L for vitrified paver colour tiles of size 40 cmx40cmx9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed. |
| 9 | M&L Granite slab 16mm to 18 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms/columan includigng rounding off the exposed edges and polishing complete all as specified and directed. |
| 10 | S&F for machine pressed precast Coloured concrete Tile with grey cement and pigments (Rubber mould casted Glossy finish) size 300x300mm of 20mm thick over & including 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 11 | M&L for cement concrete 1:2:4 Type B-0 (using 12.5 mm graded stone agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing course, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed. |
| 12 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 13 | Excavating in posts holes (or similar holes) in hard/dense soil each n.exc 0.50 cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm thick each layer watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed. |
| 14 | M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in foundation/postholes filling and mass concrete complete all as specified and directed. |
| 15 | Supply only chain link fencing of MS galvanized fencing, any size or type complete all as specified and directed. |
| 16 | Fixing only chain link fencing including line wires, any mesh, size and type fixed to any type of standards, rails, straining bolts, etc, incliding provision of binding wire complete all as specified and directed.Note : Supply only chain link fencing and line wire will be measeured and paid separetly. |
| 17 | S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking ends stiffeners confirming to Fe 290 (Gde E-165). complete all as specified and directed. |
| 18 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt exc 5cm but n.exc 10cm long and dia of neck 11 to 15mm complete all as specified and directed. |
| 19 | S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including, securing and tying at crossings with and provisions of galvanised mild steel wire staples or steel pins etc complete all as specfied and directed. (each line wire to be measured). |
| 20 | M&L galvanized Concertina coil, duly stretched, maintaing a dia of 600mm, concertina coil placed in Y shape angle iron post erected over boundary wall and fixed to angle iron with 3mm dia GI bearer wire, complete all as specified and directed. |
| 21 | M & L for preparation of new steel surfaces of any description n.exc 10cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 22 | M&L for applying two coats of synthetic enamel paint over one coat red oxide primer including Preparation of new Steel surface over 10 cm width or girth comlete all as specified and directed. |
| 23 | Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 24 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4).complete all as specified and directed. |
| 25 | M& L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and directed. |
| 26 | M&L for rubble random rubble uncoursed, well bounded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed. |
| 27 | M&L of flush pointing to RR masonary walling brought upto course in CM (1:4) complete all as specfied and directed. |
| 28 | M&L for reinforced cement concrete Design mix M-25 (using 20mm graded stone aggregate) as in coloumns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 29 | Use and waste formwork for to sides of pillar, post, strus, pier column rough finished surfaces of concrete rough finished surfaces of concrete complete all as specified and directed. |
| 30 | M&L for mild steel TMT bars,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 31 | M&L for mild steel TMT bars ,6 mm to 8 mm dia over, as in stirrups, spacers and binder and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 32 | M & L for Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed. |
| 33 | M&L for providing 25mm thick precast cement concrete louvres and jallies fency type B0 1:2:4 (using 12.5mm graded stone aggregate) set in cement mortar (1:4) (measured solid), including all mouldings but excluding frame complete all as specified and directed. (Pre cast frame shall be measured separately. |
| 34 | M&L for factory made perforated precast reinforcedcement concrete 1:2:4 Type B1 (using 20mm graded stone aggregate) set in cement mortar 1:4 in as in manhole cover slabs (for man holes/Drain cover etc.) with plain faces complete all as specified and directed. |
| 35 | M&L PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) as in Surface channels and drains etc complete all as specified and directed. |
| 36 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as speicified and directed. |
| 37 | Add or deduct for item No 36 each 25mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 38 | Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 39 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick/concrete/stone surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 40 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 41 | M & L for Washed COLOURED MARBLE stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified and directed. (Payment for providing grooves shall be made separately). |
| 42 | M & L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed. |
| 43 | M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash on wall surfaces complete all as specified and directed. |
| 44 | M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of cement base paint on wall surfaces complete all as specified and directed. |
| 45 | Dismantling of timber in fillets, rails, posts, rafters, purlins etc under 40 Sq cm provided complete all as specified and directed. |
| 46 | Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed. |
| 47 | S&F Framed work ORNAMENTAL AND INTRICATE DESIGN such as grills,gratings, etc with ends of barss shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 48 | Dismantling of AC (corrugated/semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and directed. |
| 49 | S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm corrugated steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as specfied and directed. |
| 50 | S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm plain steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding (ridge) to wall fixed with self tapping screws complete all as specfied and directed. |
| 51 | M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting, etc and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer allround before fixing in position complete all as specified and directed. |
| 52 | S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed. |
| 53 | M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 54 | M&L for applying two coats of plastic emulsion paint over one coat primer including Preparation of new concrete surface over 10 cm width or girth of kerb stone setc complete all as specified and directed. Please Enable Macros to View BoQ information |
