|
| 1 | Dismantling the cattle trap steel work including cutting with welding machine, demolishing the concrete/ brick work and stacking the dismantled materials at site within 50 m lead etc complete all as directed by the Engineer in Charge.A) Cattle trap with GI pies and I sections 4.3m x 1.9m size. |
| 2 | Taking possession and further disposal of dismantled unserviceable steel items in as is where is basis. ( Credit item) |
| 3 | GI pipes, I sections and chequered plate sheets |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5 in foundation and plinth in: |
| 5 | Cement mortar 1:4 (1 cement : 4 M sand) |
| 6 | Supplying and filling in plinth with good earth under floors, including watering, ramming, consolidating and dressing complete. |
| 7 | Dismantling the steel entrance gates of different sizes and staking within the quarters compound with all lifts and lead upto 50m. |
| 8 | Gate of size 3.00x1.8m |
| 9 | Gate of size 1.2x1.8m |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 11 | 1:4:8 (1 Cement : 4 M sand : 8 graded stone aggregate 40 mm nominal size ). |
| 12 | 1:2:4 (1 cement : 2 M sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 14 | Foundations, footings, bases for columns. |
| 15 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 16 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 17 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 18 | 12 mm cement plaster of mix : |
| 19 | 1:6 (1 cement: 6 M sand) |
| 20 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 21 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 22 | Cutting the branches of trees hanging over the terraces at required point in the tree, cutting the cut branches into small pieces for easy loading and including disposal of the same out side the quarters complex. A) branches of girth upto 40cm |
| 23 | Cleaning quarters block terraces off vegetation, tree leaves, branches, plants growth, algae, garbage, rubbish etc and disposal of the cleared items outside the quarters complex to corporation dumping point / safe disposal by other means all complete as directed by the Engineer in Charge. |
| 24 | Closing the holes in parapet walls with brick/ concrete and finishing the same with cement mortar to match the surface as directed by the Engineer in charge. |
| 25 | Providing and fixing in brickwork 160mm outer dia PVC spout pipes of required length ( maximum 50cm) at required height in Rain water chambers including making holes and finishing with cement mortar etc complete all as directed by the Engineer in Charge. |
| 26 | Providing and fixing PVC end cup to spout pipes of outer dia 160mm |
| 27 | Fixing the available steel Gates in position by making holes in gate pillars at required heights and size upto 250x250x300mm and filling the holes with cement concrete of mix 1:1.5:3 ( 1 cement: 1.5 M sand: 3 stone aggregate 20mm nominal size) including finishing with cement mortar 1:4 ( 1 cement :4 M sand) all complete as directed by the Engineer in charge. |
| 28 | Gate of size 3.00x1.8m |
| 29 | Gate of size 1.2x1.8m |
| 30 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 31 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 32 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 34 | One or more coats on old work. |
| 35 | Disposal of building rubbish, cleared garbage, cut tree branch pieces and leaves etc to the corporation dumping yard upto 15km away from the quarters campus / paying fees to the corporation, including stacking, loading, unloading etc in garbage/rubbish vehicle at quarters and at unloading point after trasporting the same. Please Enable Macros to View BoQ information |
