|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator) over areas exceeding 30cm and up to 1.50Mtr in depth 1.5 mtr in width as well as 10 sqm on plan)Including disposal of excavated earth upto 1Mtr from cutting edge, disposed earth to be leveled and neatly dressed in: |
| 2 | All kinds of soil @60% |
| 3 | Soft Rock @35% |
| 4 | Hard rock (BP) @05% |
| 5 | Earth work in excavation by manual means in foundation trenches or drains (notexceeding 1.5 m in width or 10 sqm on plan), including dressing of sides andramming of bottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. |
| 6 | All kinds of soil @60% |
| 7 | Soft Rock @35% |
| 8 | Hard rock (BP) @05% |
| 9 | Dry stone pitching (any thickness) excluding cost of stones. On Horizontal |
| 10 | Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (40mm nominal size) Incld. Carriage complete. |
| 11 | Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :5.2.21:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Reinforcement for RCC work including straightening, bending, and cutting, placing in position and binding all complete .Hot rolled deformed bars. (Thermo-Mechanically treated bars.) |
| 14 | Cast in situ plum concrete work of nominal mix concrete M-10 grade (total mass of dry nallah aggregate 480kg(max excluding plums) and water 34Kg (max) per 50kg of cement) nominal max size of stone aggregate 20mm, volumetric batching using plum (size over 160mm, split nallah stone or quarry stone) @20% of gross volume upto plinth level including curing by excluding form work costs.complete job |
| 15 | Random Rubble masonry with and stone from qyarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand) |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 17 | Foundations, footings, bases of columns etc. for mass concrete. |
| 18 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 19 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 20 | Columns, pillars, piers, abutments, posts and struts |
| 21 | Suspended floors, roofs, landings, balconies and access platforms. |
| 22 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 23 | Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fastener shall be paidfor separately).2nd Class Kail Wood |
| 24 | Providing and fixing panelled or panelled and glazed shutters for doors, windowsand clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as perdirection of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall bepaid separately)Second class kail wood9.5.5.1 35 mm thick shutters |
| 25 | Providing and fixing panelling or panelling and glazing in panelled or panelled andglazed shutters for doors, windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :9.7.2.2 Second class Kail wood |
| 26 | Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. The rate includes providing and placing in position 2 nos. 6 mm dia M.S bars at every third course of masonry work.Extra for brick work/tile brick/AAC block masonry in superstructure above floor V level for each four floors or part thereof by mechanical means: |
| 27 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement motor 1:3(cement: 3 course sand) cost of required centering shuttering and finishing smooth with 6mm thick cement plaster 1:3(1cement:3 fine sand) on exposed surface complete 1:3:6(1cement:3 coarse sand :6 graded stone agg, 20mm nominal size |
| 28 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25mm dia incld Tee ,elbow junction Box, Fan Box etc |
| 29 | Structural steel work riveted, bolted or welded in built up sections, trusses andframed work, including cutting hoisting ,fixing in position all carriage complete. |
| 30 | Providing and fixing Wooden planks seating (Kaidi wood) plained on one side including finishing polishing complete. 35mm |
| 31 | Providing and fixing 19mm thick polycarbonate Sheet roofing |
| 32 | Providing and fixing Colour coated profile sheet (50 to 53 mm thick) roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead,over steel truss. |
| 33 | 15mm thick Cement Plaster 1:4 mix (1cement: 4 Course Sand) |
| 34 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick |
| 35 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 36 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and includingpriming coat of exterior primer applied @ 2.20kg/10 sqm |
| 37 | Applying priming coat:13.50.1With ready mixed pink or Grey primer of approved brand and manufacture onwood work (hard and soft wood) |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :13.62.1Two or more coats on new work over an under coat of suitable shade withordinary paint of approved brand and manufacture |
| 39 | paintingwith aluminiumpaintof approvedbrandandmanufacturetogivean even shade . Two or more coats on new work |
| 40 | providing and fixing 5 mm thick glass (cloured or plain as peruired at site) including ist class beading with nails complete |
| 41 | Supply and fixing of 12mm thick ply wood ceiling including budloo wood joist (2.5\\" x 1.5\\") frame work making opening for window/ ventelators, priming and painting complete. |
| 42 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed inposition with necessary stainless steel screws etc. Budloo/Fir wood |
| 43 | Providing and fixing Notipine ply 6mm thick with wooden Joist frame work of (1.5x2 Inch) Kadi wood joist) |
| 44 | Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer in-charge. 12.53.1 With Type N-Normal 50 mm thick 12.53.2 With Type SE-Self Extinguishing type 50 mm thick. |
| 45 | Providing and fixing of T&G wooden panelling of rait wood/ Shalimar brand including fixing Base Frame work of Kadi wood and wooden Cornice , iron screws complete. |
| 46 | Providing and fixing rock wool 50mm thick of requiered density in joist panells under wall lining |
| 47 | Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish |
| 48 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 49 | Providingandlayingvitrifiedfloortilesindifferentsizes(thicknesstobespecified bythemanufacturer)withwaterabsorptionlessthan0.08%andconformingto IS: 15622, of approvedmake, inall colours andshades, laidon20mmthick cementmortar1:4(1cement:4coarsesand),jointingwithgreycementslurry@ 3.3 kg/ sqmincluding grouting the jointswithwhite cement andmatching pigments etc., complete.Size of Tile 600x600 mm |
| 50 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 51 | Providing and fixing door/ window fixtures |
| 52 | L - Dop |
| 53 | Handlefor Door |
| 54 | Handlefor window |
| 55 | T- bolt 150mm |
| 56 | T- bolt 100mm |
| 57 | Providing and fixing PPR pipe fitting for water supply internal and main line inclduing all sort of fittings I,e TEE, Elbow, bends, Union, sockes etc |
| 58 | Providing and fixing water closet squatting pan (Indian typeW.C. pan) with 100mm sandcast Iron P or Strap, 10litre lowlevel white P.V.C. flushing cistern with manually controlled device (handlelever) conforming to IS:7231, with all fitting sand fixtures complete including cutting andmaking good the wall sand floors wherever required : 17.1.1 White Vitreouschina Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 59 | ProvidingandfixingwashbasinwithC.I.brackets,15mmC.P.brasspillartaps,32 mmC.P. brasswaste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :WhiteVitreousChinaWashbasinsize630x450mmwithapairof15mmC.P. brass pillar taps. |
| 60 | Providing and fixing CP Bath fittings |
| 61 | Bib cock |
| 62 | Angle Cock |
| 63 | C.P connection |
| 64 | CP Grating |
| 65 | Preparation and consolidation of sub grade with power road roller of 8 to 12tonne capacity after excavating earth to an average of 22.5 cm depth, dressing tocamber and consolidating with road roller including making good the undulationsetc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50metres. |
| 66 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 67 | Providing and laying polypropyline fibers, geotextile saperation barrier of 140GSM as per standard procedure complete as required |
| 68 | Providing, laying and compacting stone aggregagte of different size to form contour and elevation to the desired level as per drawing and instruction of engineer incharge (size 40-6mm ) crushed stone aggregate, each layer is to compacted by vibratory power road roller of 8-10 tonne to desired line grade and cross section |
| 69 | 40mm aggregate |
| 70 | 12-20mm aggregate |
| 71 | 06-10mm aggregate |
| 72 | roviding and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. |
| 73 | Providing and fixing ready made Synthetic/ PU surface for volley ball court complete |
| 74 | Providingandlayingmachinecut,mirrorpolished, ItalianMarblestoneflooring laid in requiredpattern in linear portionof thebuildingall completeas per architecturaldrawings,with18mmthickstoneslablaidover20mm(average) thickbaseofcementmortar1:4(1cement:4coarsesand) laidandjointedwith [email protected]/sqmincludingpointingwithwhitecementslurry admixedwithpigmenttomatchthemarbleshadeincludingrubbing,curingand polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18mmthickItalianMarblestoneslab,Perlato,Rossoverona,FireRedorDark Emperadore etc |
| 75 | Providing and laying marble skirting for flooring |
| 76 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 77 | Carraige of driffrends materails from source to actual side of work. |
| 78 | Carraige of sand aggregate far an average lead up to 20 km by MT |
| 79 | Carraige of stone far an average lead up to 20 km by MT Please Enable Macros to View BoQ information |
