|
| 1 | Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed. |
| 2 | Anti-termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed. |
| 3 | Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm center to center and sealing the same, complete all as specified and directed. |
| 4 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land, complete all as specified and directed. |
| 5 | Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6, complete all as specified and directed. |
| 6 | Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land, complete all as specified and directed. |
| 7 | M & L for Old unserviceable loose spalled concrete, chiseled from roof ceiling with the help of scrapers, chisel & hammer, cleaning of rust from mild steel rod, applying cement slurry spray 3.00 kg per sqm by paint brush over cleaned surface and thereafter rendering 20-30mm Thick ready mix plaster in multi layer for ceiling on brick wall or concrete surfaces including making groove of appropriate size and finished even & smooth without using extra cement including two coat of OBD / Weathercoat, complete all as specified and as directed by Engr-in-Charge. |
| 8 | Material and labour for 15 mm thick ready mix plaster in single layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, complete all as specified and directed by Engr-in-Charge. |
| 9 | Material and labour for 12 mm thick Ready Mix Plaster in single layer on other than fair faces of concrete surfaces in wall (internal surface) and finished even and smooth complete all as specified and directed by Engr-in-Charge. |
| 10 | Material and Labour for applying one coat of wall putty 1 mm Average thickness on wall surface incl rubbing through authorised applicators, complete all as specified and directed. |
| 11 | Material and Labour for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed. |
| 12 | Material and Labour for complete removal of existing treatment of old surface of wall and applying two coats of oil emulsion distemper through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed. |
| 13 | Material and Labour for preparing newly plastered surfaces of walls / ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat and top coat over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings, complete all as specified and directed. |
| 14 | Material and Labour for complete removal of existing treatment of old plastered surfaces of walls / ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat and top coat over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings, complete all as specified and directed. |
| 15 | Tanking down old cupboard shutteror vanity shutter incl all fitting, complete all as specified and directed. |
| 16 | S&F of 18mm thick both Side pre laminated HDHMR Board of any colour, Matt surface finish, grade I as per IS 14587, for frame and shutter with 18 mm wide PVC strrips lipping for kitchen cabinets, complete all as specified and directed by Engr-in-charge. |
| 17 | S & F of round stainless steel cabinet/drawers handlers dia of 27mm, complete all as specified and directed. |
| 18 | S & F of medium weight, cold rolled mildsteel,SS finish, (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self-closing, complete all as specified and directed by Engr-in-charge. |
| 19 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) including removing debris out side MD land, complete all as specified and directed. |
| 20 | M&L for 40 mm thick PCC type B-1 1:2:4 (20 mm graded stone aggregate) as in levlling course, complete all as specified and directed. |
| 21 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, complete all as specified by Engr in charge. |
| 22 | Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish including removing debris out side MD land, complete all as specified and directed. |
| 23 | Dismantling, stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed. |
| 24 | Material and Labour for first and premium quality of vetrified coloured marble finished digital tiles 1200 mm x 600 mm x 8 to 10 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed. |
| 25 | Material and Labour for first and premium quality of vetrified coloured marble finished digital tiles size 600 x 1200 x 8 to 10 mm thick polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 26 | M&L for machine cut kota stone slab flooring 20-25 mm thick (bull nosing with three antiskid grooved) in one pice over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding Screed bed or bedding layer of mortar 20 mm thick in (1:6) for laying floor finishes, complete all as specified and directed. |
| 27 | Material and Labour for first and premium quality of PVC vinyl flooring 0.45 mm thick, in floors, design and colour as aprroved by GE etc. set and jointed with suitable adhesive as per manufacturer insturction, complete all as specified and directed. |
| 28 | Material and Labour for first and premium quality of non skid, joint free ceramic “coloured” tiles of size 300 x 300 x 6-7 mm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 29 | Material and Labour for first and premium quality of non skid, ceramic “coloured” tiles of size 300 x 300 x 6-7 mm thick, cut to size in vertical surface, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed. |
| 30 | Material and Labour for first and premium quality of Glazed ceramic coloured digital tiles 600 mm x 300 mm x 6 to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed. |
| 31 | Material and Labour for Vitrified double charge tiles any shade size 600 x 600 x 8-10 mm thick (square/ rectangular) polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 32 | Material and Labour for Vitrified double charge tiles any shade size 600 x 600 x 8-10 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed. |
| 33 | Material and Labour for HD Ceramic tiles any shade size 600 x 600 x 8-10 mm thick (square/ rectangular) polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 34 | Material and Labour for HD Ceramic tiles any shade size 600 x 600 x 8-10 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed. |
| 35 | Material and Labour for glazed ceramic exterior wall tiles 6 to 8 mm thick not exceeding 0.36 sqm etc set & jointed in cement and pointed in coloured cement to match the shade of tile over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed. |
| 36 | Material and Labour for heavy duty outdoor vitrified tiles dark or light shade 12-15 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 37 | M&L in repair for 8 mm thick laminate wooden flooring, water resistant, termite resistant, polished flooring in a flating glue less click locked & sealed flooring similar to a jigsaw puzzle.In this method, the individual planks are locked on the each other by means of the clicking together but do not attach to the sub floor on which it is being installed, complete all as specified and directed. |
| 38 | Supply & Fixed in repair Aluminium composite panel sheet 3mm thick PVCF wooden finished of brand name 'Euro bound'/\\"Alstrong\\"./ \\"Viva\\" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface complete all as specified and directed and approved sample as kept in GE Office. |
| 39 | Material and Labour for Granite stone best quality (of any type) 18 to 20 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 40 | Molding (full moulding) of granite slab edges as directed by Engr-in-charge including polishing etc, complete all as specified and directed. |
| 41 | Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets, complete all as specified and directed. |
| 42 | Supply and fixing for 12mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work complete all as specified and directed and sample as approved by GE. |
| 43 | Supply and fixing for 6 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work complete all as specified and directed and sample as approved by GE. |
| 44 | M & L Decorative laminate 0.9 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed by engr in charge. |
| 45 | Supply and fixing for 1 to 2 mm thick veneered desinger natural wood grain sheet fixed with adhesive as per manufactrue instruction to plywood work, complete all as specified and directed and sample as approved by GE. |
| 46 | Supply and fixing in repair for Plain fillets of second class hard wood, square or rectangular in section, clean sawn, wrought, secured with nails or brads; sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm, complete all as specified and directed and sample as approved by GE. |
| 47 | Material and Labour for French polishing on new wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed. Make: \\"Tractor Uno\\" of Asian Paints / \\"Jadoo\\"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE. |
| 48 | Material and Labour for French polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed. Make: \\"Tractor Uno\\" of Asian Paints / \\"Jadoo\\"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE. |
| 49 | Supply & Fixed in repair 0.5 to 1 mm thickness 3D acrylic washable wall papers fixed with adhsive as per manufacture instruction as in ceiling/coloumns and in vertical surface, complete all as specified and directed and approved sample as kept in GE Office. |
| 50 | Supply & Fixed in repair 12 mm thickness fluted WPC indoor panel fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface, complete all as specified and directed and approved sample as kept in GE Office. |
| 51 | Supply and fixing in repair 10 to 12 mm thick toughned glass as in door shutters, plateform partition including necessary cutting to shape, drilling holes as reqd, jointing cleats, glazing clips, ruber neoprene packing, Stainless steel fittings such as handle 2 nos, 100mm hinge 3 nos, lock including keys 1 set, Stainless steel snap beading & screws, complete all as specified and directed. |
| 52 | S & F frosted film / sunfilm / logo in any type or design and size, complete all as specified and directed. |
| 53 | M &L for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately), complete all as specified and directed. |
| 54 | M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed. |
| 55 | Material and Labour for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B-0 / Cement mortar 1:3, complete all as specified and directed with following:-(a) Material and Labour for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong) of size 25 x 25 mm (b) Supply and fixing 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners(c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level.(d) Supply and fixing E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE. |
| 56 | M& L lnsulated PVC Wall Lining without PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick wood grain printed single side prelaminated PVC sheet duly fitted into the wall as per specifications and drawing, complete all as specified and directed by Engr in charge. |
| 57 | Supply and fixing for Solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed. |
| 58 | S&F for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame, complete all as specified and directed. |
| 59 | S & F PVC ceiling wihtout insulation panelsk with EPS stuck to 1mm Printred PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing, complete all as specified and directed. |
| 60 | M & L for Anodised aluminium snap grid frame work for false ceiling / PoP Ceiling, complete all as specified and directed by Engr - in - charge. |
| 61 | S&F in repair Stainless steel sink 1.00 mm thick for kitchen, with plug, waste pipe, washers including cantilever cast iron bracket, connecting union over all size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm, fixed, complete all as specified and directed. |
| 62 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 15 mm bore, complete all as specified and directed. |
| 63 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 20 mm bore, complete all as specified and directed. |
| 64 | Supply & fixing UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc, complete all as specified and directed. |
| 65 | Supply & fixing UPVC pipes out side dia 20 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc, complete all as specified and directed. |
| 66 | S&F Tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 15 mm bore, complete all as specified and directed. |
| 67 | S&F Tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 20 mm bore, complete all as specified and directed. |
| 68 | Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 15 mm bore, complete all as specified and directed. Note:- Old serviceable pipe received from item No. 62 above shall be reuse. |
| 69 | Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 20 mm bore, complete all as specified and directed. Note:- Old serviceable pipe received from item No. 63 above shall be reuse. |
| 70 | M&L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm girth but not exc girth 20 cm in brick/stone wall, complete all as specified and as directed by Engr in charge. |
| 71 | Supply & fixing in repairs vitreous china white wash basin flat back size 550 x 400mm excluding taps, waste, chain, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand, complete all as specified and directed. |
| 72 | Supply & fixing in repair for pillar taps cost copper alloy fancy type with capstan head, chromium plated screwed down high pressure with or fly nuts screwed for 15 mm bore iron pipe and fixed, complete all as specified and directed. |
| 73 | Supply & fixing in repair Chromium plated brass angle valve for 15mm bore pipe, fixed, complete all as specified and directed. |
| 74 | Supply & fixing in repair, two way angle valve cock chromium plated brass fancy type bore 15mm, complete all as specified and directed. |
| 75 | Supply & fixing in repairs plastic seat cover black/white of pattern W.C including fixing divice and Chromium plated nuts, complete all as specified and directed. |
| 76 | Supply & fixing in repair vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe etc complete and making good to floor, complete all as specified and directed. |
| 77 | Supply & fixing in repairs bevelled edge 5.5 mm thick mirror of selected quality glass, 660 x 450 mm size, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed and sample as approved by GE. |
| 78 | Supply & fixing in repair CP brass toilet paper holder, superior quality, complete all as specified and directed. |
| 79 | Supply & fixing in repair CP brass, soap dish, superior quality, complete all as specified and directed. |
| 80 | Supply & fixing in repair Health foucet including PVC pipe 1.50m long with brass nuts for EWC, fixed, complete all as specified and directed. |
| 81 | Supply & fixing in repair PVC flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket, complete all as specified and directed. |
| 82 | Supply & fixing in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, complete all as specified and directed. |
| 83 | Supply & fixing in repair sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60 cm long, complete all as specified and directed. |
| 84 | Material and labour for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete and sunken floor treatments, complete all as specified and directed. |
| 85 | M & L for Water proofing treatment to sunken slab /floors/walls etc and shall be carried out as specified below and as directed.(a) Cleaning the sunken portion of Toilet/bath/WC/Kitchen throughly to remove the laitance, dirt etc and thrown out side the MD land. (b) Form angle fillet of size 50 mm x 50 mm along the junction of wall and floor using polymer modified mortar, Apply one coat of polymer coating on all angle fillets by brush and cover it with 100 mm open glass fibre / geotextile fibre mesh when it is still wet. Apply second coat of the same coating on the angle fillet and allow it to dry completely. Make PIDILITE(Dr fixit Pidicrete URP)/ASIAN(smarcare repair polymer)/FOROC/BASF/SIKA. (c) Sanitary pipe entering through walls and floor shall be sealed with bitumin based seal tape / epoxy bonding agent and gaps to be grouted with non shrink cementitious grout . Nahani traps etc to be fitted securely and gaps around it to be grouted in the same manner. Make : PIDILITE(Dr fixit epoxy bonding agent or bathseal tape )/ AISAN (Smartcare apcorap epoxy bonding agent). Please Enable Macros to View BoQ information |
| 86 | M & L for Water proofing treatment to sunken slab /floors/walls etc and shall be carried out as specified below and as directed.(a) Cleaning the sunken portion of Toilet/bath/WC/Kitchen throughly to remove the laitance, dirt etc and thrown out side the MD land. (b) Form angle fillet of size 50 mm x 50 mm along the junction of wall and floor using polymer modified mortar, Apply one coat of polymer coating on all angle fillets by brush and cover it with 100 mm open glass fibre / geotextile fibre mesh when it is still wet. Apply second coat of the same coating on the angle fillet and allow it to dry completely. Make PIDILITE(Dr fixit Pidicrete URP)/ASIAN(smarcare repair polymer)/FOROC/BASF/SIKA. (c) Sanitary pipe entering through walls and floor shall be sealed with bitumin based seal tape / epoxy bonding agent and gaps to be grouted with non shrink cementitious grout . Nahani traps etc to be fitted securely and gaps around it to be grouted in the same manner. Make : PIDILITE(Dr fixit epoxy bonding agent or bathseal tape )/ AISAN (Smartcare apcorap epoxy bonding agent). Please Enable Macros to View BoQ information |
